Hi, I have a routed /64 and /56 and a single ipv4 address. I'm trying to split the /56 to 256 /64 subnets and assign them to end devices, with ipv4 NAT. So each device will be in the same ipv4 subnet and different ipv6 subnet For example, The ipv4 subnet is 10.123.123.0/24 The ipv6 subnet is 2a0…

[image] 73fb: I'm trying to split the /56 to 256 /64 subnets and assign them to end devices, with ipv4 NAT. This doesn't make much sense. Your router gets a delegated prefix /56. That means that you can have 256 interfaces on the router, each with its own /64, or you can have one /64 on the l…

How to route each device a /64 subnet?

Installing and Using OpenWrt Network and Wireless Configuration

lleachii November 30, 2023, 9:27pm 18

Just to be clear:

I am able to configure prefixes larger than /64 on interfaces - and in turn, capable devices can receive a Prefix Delegation from the OpenWrt.