Does anyone have a backup of the original firmware For router TP Link Archer MR 200v6 ? Just when st Openwrt I didn't make a backup of the original firmware. And now I can't go back to the original firmware.
Tplink got them, disguised as "firmware upgrade files"
The firmware needs to be original, but under Tftp . From the site Tp link It weighs 70, and deleting the bootloader didn't help. I don't know how to reduce the firmware.
Tftp recovery file is bin extracted from zip on tplinks site. On small platforms it is raw flash image, on those with safeloader there is data block with supported devices in header.
Can you help me extract it so that it weighs 8 MB?
50mb zip. Are you sure it is written archer mr200(eu) v6.0 on the label? Maybe in other place v6 is different v6
After unpacking the archive it weighs 70~ MB. And, for ,tftp needs 8 mb
The extra ~60MB might be a modem firmware.
I understand, but how can I remove these 60 MB?
If you know how to do this, please tell me.
Someone can make a backup of mtd partitions or make firmware for recovery from tftp, it should weigh no more than 8 MB. Now it's openwrt, I want to go back to the original. Ah, the original firmware weighs 73 MB and it does not fit there and, accordingly, does not load into memory. The error is 90%.