# How does rrm work?

**URL:** <https://forum.openwrt.org/t/how-does-rrm-work/32635>\
**Category:** Network and Wireless Configuration\
**Created:** [March 5, 2019, 6:04am UTC](https://forum.openwrt.org/t/how-does-rrm-work/32635 "2019-03-05T06:04:25Z")\
**Posts on this page:** 1\
**Showing post:** 24

<div class="post-metadata">

**Author:** ![muddyfeet](https://forum.openwrt.org/letter_avatar/muddyfeet/32/5_5575768a8748004e209b776fc1b2916d.png) [@muddyfeet](https://forum.openwrt.org/u/muddyfeet)\
**Post date:** [November 30, 2019, 1:39pm UTC](https://forum.openwrt.org/t/how-does-rrm-work/32635/24 "2019-11-30T13:39:36Z")

</div>

Thanks @PolynomialDivision - that was quite helpful in that it prompted me to come up with a way to easily test the neighbour reports. First set up a wpa\_supplicant hanging off the AP with the neighbour reports active. Then use the wpa\_cli command "neighbor\_rep\_request" to trigger a request. The mac addresses have been modified.

It appears to be working.

```
>neighbor_rep_request
OK
<3>RRM-NEIGHBOR-REP-RECEIVED bssid=14:xx:xx:xx:xx:c9 info=0x9ef op_class=81 chan=11 phy_type=7
<3>RRM-NEIGHBOR-REP-RECEIVED bssid=14:xx:xx:xx:xx:c8 info=0x19ff op_class=122 chan=108 phy_type=9
<3>RRM-NEIGHBOR-REP-RECEIVED bssid=14:xx:xx:xx:xx:e4 info=0x19ff op_class=122 chan=132 phy_type=9
<3>RRM-NEIGHBOR-REP-RECEIVED bssid=14:xx:xx:xx:xx:e5 info=0x9ef op_class=81 chan=6 phy_type=7

```

---

_[View the full topic](https://forum.openwrt.org/t/how-does-rrm-work/32635)._
