How can i add 3 ap on my 1 openwrt router

Installing and Using OpenWrt
1

I have a problem adding 3 ap on my 1 router

I have 1 ap 2.5ghz backup and i need 2 ap 5ghz the problem is the 3rd ap is failing it shows the ap name but wont connect, the diference between ap3 and ap 2 is name and wpa2 and wpa3 what caj i do i need to have the 3 ap and wont work no channel not band changed just name and wpa mode. Is there any way i can make it work?

2

Some hardware is limited (by the wifi chipset) as to how many SSIDs can be simultaneously broadcast. Let's dig into the config and device details to see what might be causing the issues.

Please connect to your OpenWrt device using ssh and copy the output of the following commands and post it here using the "Preformatted text </> " button:
grafik
Remember to redact passwords, MAC addresses and any public IP addresses you may have:

ubus call system board
cat /etc/config/network
cat /etc/config/wireless
cat /etc/config/dhcp
cat /etc/config/firewall
iw list
3

Ok thank you

4

You didn't actually post any of the information... we don't know if your device is actually limited or if there are config issues, or something else going on. Did you mean to mark a solution already?

5

I think with your information that is actually limited, if it werent then it would work out the box instantly, it diesnt have science it just 3 ap, i would not like to dox myself posting my config thank you

6

Ok. Whatever you want.

7

This topic was automatically closed 10 days after the last reply. New replies are no longer allowed.