I connected my computer to ACRH17 by cable, ping from computer to router, I get >2ms latency. This is strange, because it's <1ms when router is in opboot mode.
openwrt version: custom build from x-wrt to support acrh17, with 4.19.106 kernel.
-ct frimware, and -ct driver
Is there any way I could do to troubleshooting this?
[ 0.000000] Booting Linux on physical CPU 0x0
[ 0.000000] Linux version 4.19.106 (lxd@lxd) (gcc version 8.3.0 (OpenWrt GCC 8.3.0 r12464+93-a017773a92)) #0 SMP Fri Mar 6 16:04:50 2020
[ 0.000000] CPU: ARMv7 Processor [410fc075] revision 5 (ARMv7), cr=10c5387d
[ 0.000000] CPU: div instructions available: patching division code
[ 0.000000] CPU: PIPT / VIPT nonaliasing data cache, VIPT aliasing instruction cache
[ 0.000000] OF: fdt: Machine model: ASUS RT-ACRH17
[ 0.000000] Memory policy: Data cache writealloc
[ 0.000000] On node 0 totalpages: 65024
[ 0.000000] Normal zone: 512 pages used for memmap
[ 0.000000] Normal zone: 0 pages reserved
[ 0.000000] Normal zone: 65024 pages, LIFO batch:15
[ 0.000000] random: get_random_bytes called from start_kernel+0x7c/0x3bc with crng_init=0
[ 0.000000] percpu: Embedded 13 pages/cpu s22284 r8192 d22772 u53248
[ 0.000000] pcpu-alloc: s22284 r8192 d22772 u53248 alloc=13*4096
[ 0.000000] pcpu-alloc: [0] 0 [0] 1 [0] 2 [0] 3
[ 0.000000] Built 1 zonelists, mobility grouping on. Total pages: 64512
[ 0.000000] Kernel command line: root_rfs=0x00000000 flash_type=nand ubi.mtd=UBI_DEV
[ 0.000000] Dentry cache hash table entries: 32768 (order: 5, 131072 bytes)
[ 0.000000] Inode-cache hash table entries: 16384 (order: 4, 65536 bytes)
[ 0.000000] Memory: 250056K/260096K available (4748K kernel code, 159K rwdata, 1276K rodata, 1024K init, 152K bss, 10040K reserved, 0K cma-reserved)
[ 0.000000] Virtual kernel memory layout:
[ 0.000000] vector : 0xffff0000 - 0xffff1000 ( 4 kB)
[ 0.000000] fixmap : 0xffc00000 - 0xfff00000 (3072 kB)
[ 0.000000] vmalloc : 0xd0800000 - 0xff800000 ( 752 MB)
[ 0.000000] lowmem : 0xc0000000 - 0xd0000000 ( 256 MB)
[ 0.000000] modules : 0xbf000000 - 0xc0000000 ( 16 MB)
[ 0.000000] .text : 0x(ptrval) - 0x(ptrval) (5741 kB)
[ 0.000000] .init : 0x(ptrval) - 0x(ptrval) (1024 kB)
[ 0.000000] .data : 0x(ptrval) - 0x(ptrval) ( 160 kB)
[ 0.000000] .bss : 0x(ptrval) - 0x(ptrval) ( 153 kB)
[ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
[ 0.000000] rcu: Hierarchical RCU implementation.
[ 0.000000] NR_IRQS: 16, nr_irqs: 16, preallocated irqs: 16
[ 0.000000] rcu: Offload RCU callbacks from CPUs: (none).
[ 0.000000] arch_timer: cp15 timer(s) running at 48.00MHz (virt).
[ 0.000000] clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0xb11fd3bfb, max_idle_ns: 440795203732 ns
[ 0.000008] sched_clock: 56 bits at 48MHz, resolution 20ns, wraps every 4398046511096ns
[ 0.000023] Switching to timer-based delay loop, resolution 20ns
[ 0.000268] Calibrating delay loop (skipped), value calculated using timer frequency.. 96.00 BogoMIPS (lpj=96000)
[ 0.000286] pid_max: default: 32768 minimum: 301
[ 0.000453] Mount-cache hash table entries: 1024 (order: 0, 4096 bytes)
[ 0.000469] Mountpoint-cache hash table entries: 1024 (order: 0, 4096 bytes)
[ 0.001122] CPU: Testing write buffer coherency: ok
[ 0.002100] Setting up static identity map for 0x80300000 - 0x80300060
[ 0.002256] rcu: Hierarchical SRCU implementation.
[ 0.002943] smp: Bringing up secondary CPUs ...
[ 0.005826] smp: Brought up 1 node, 4 CPUs
[ 0.005846] SMP: Total of 4 processors activated (384.00 BogoMIPS).
[ 0.005855] CPU: All CPU(s) started in SVC mode.
[ 0.006757] devtmpfs: initialized
[ 0.011239] VFP support v0.3: implementor 41 architecture 2 part 30 variant 7 rev 5
[ 0.011390] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 3822520892550000 ns
[ 0.011415] futex hash table entries: 1024 (order: 4, 65536 bytes)
[ 0.011609] pinctrl core: initialized pinctrl subsystem
[ 0.012630] NET: Registered protocol family 16
[ 0.012955] DMA: preallocated 256 KiB pool for atomic coherent allocations
[ 0.014268] cpuidle: using governor ladder
[ 0.014319] cpuidle: using governor menu
[ 0.033652] cryptd: max_cpu_qlen set to 1000
[ 0.034555] usbcore: registered new interface driver usbfs
[ 0.034629] usbcore: registered new interface driver hub
[ 0.034751] usbcore: registered new device driver usb
[ 0.034805] pps_core: LinuxPPS API ver. 1 registered
[ 0.034818] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>
[ 0.034845] PTP clock support registered
[ 0.036298] clocksource: Switched to clocksource arch_sys_counter
[ 0.037862] NET: Registered protocol family 2
[ 0.038697] tcp_listen_portaddr_hash hash table entries: 512 (order: 0, 6144 bytes)
[ 0.038735] TCP established hash table entries: 2048 (order: 1, 8192 bytes)
[ 0.038773] TCP bind hash table entries: 2048 (order: 2, 16384 bytes)
[ 0.038822] TCP: Hash tables configured (established 2048 bind 2048)
[ 0.038938] UDP hash table entries: 256 (order: 1, 8192 bytes)
[ 0.038975] UDP-Lite hash table entries: 256 (order: 1, 8192 bytes)
[ 0.039162] NET: Registered protocol family 1
[ 0.039204] PCI: CLS 0 bytes, default 64
[ 0.041695] workingset: timestamp_bits=30 max_order=16 bucket_order=0
[ 0.046559] squashfs: version 4.0 (2009/01/31) Phillip Lougher
[ 0.046575] jffs2: version 2.2 (NAND) (SUMMARY) (LZMA) (RTIME) (CMODE_PRIORITY) (c) 2001-2006 Red Hat, Inc.
[ 0.052785] NET: Registered protocol family 38
[ 0.052830] io scheduler noop registered
[ 0.052841] io scheduler deadline registered (default)
[ 0.054617] qcom-pcie 40000000.pci: host bridge /soc/pci@40000000 ranges:
[ 0.054662] qcom-pcie 40000000.pci: IO 0x40200000..0x402fffff -> 0x40200000
[ 0.054701] qcom-pcie 40000000.pci: MEM 0x40300000..0x40ffffff -> 0x40300000
[ 0.321886] qcom-pcie 40000000.pci: Link up
[ 0.322051] qcom-pcie 40000000.pci: PCI host bridge to bus 0000:00
[ 0.322073] pci_bus 0000:00: root bus resource [bus 00-ff]
[ 0.322091] pci_bus 0000:00: root bus resource [io 0x0000-0xfffff] (bus address [0x40200000-0x402fffff])
[ 0.322106] pci_bus 0000:00: root bus resource [mem 0x40300000-0x40ffffff]
[ 0.322161] pci 0000:00:00.0: [17cb:1001] type 01 class 0x060400
[ 0.322200] pci 0000:00:00.0: reg 0x10: [mem 0x00000000-0x00000fff 64bit]
[ 0.322256] pci 0000:00:00.0: PME# supported from D0 D3hot
**[ 0.324044] PCI: bus0: Fast back to back transfers disabled**
[ 0.324258] pci 0000:01:00.0: [168c:0046] type 00 class 0x028000
[ 0.324463] pci 0000:01:00.0: reg 0x10: [mem 0x00000000-0x001fffff 64bit]
[ 0.324968] pci 0000:01:00.0: PME# supported from D0 D3hot D3cold
[ 0.326803] PCI: bus1: Fast back to back transfers disabled
[ 0.326862] pci 0000:00:00.0: BAR 8: assigned [mem 0x40400000-0x405fffff]
[ 0.326880] pci 0000:00:00.0: BAR 0: assigned [mem 0x40300000-0x40300fff 64bit]
[ 0.326906] pci 0000:01:00.0: BAR 0: assigned [mem 0x40400000-0x405fffff 64bit]
[ 0.326970] pci 0000:00:00.0: PCI bridge to [bus 01-ff]
[ 0.326987] pci 0000:00:00.0: bridge window [mem 0x40400000-0x405fffff]
[ 0.331485] bam-dma-engine 8e04000.dma: num-channels unspecified in dt
[ 0.331507] bam-dma-engine 8e04000.dma: num-ees unspecified in dt
[ 0.332960] tcsr 1949000.tcsr: setting wifi_glb_cfg = 41000000
[ 0.333054] tcsr 194b000.tcsr: setting usb hs phy mode select = e700e7
[ 0.333137] tcsr 1953000.ess_tcsr: setting ess interface select = 0
[ 0.333220] tcsr 1957000.tcsr: setting wifi_noc_memtype_m0_m2 = 2222222
[ 0.333685] Serial: 8250/16550 driver, 2 ports, IRQ sharing disabled
[ 0.334498] msm_serial 78af000.serial: msm_serial: detected port #0
[ 0.334548] msm_serial 78af000.serial: uartclk = 1843200
[ 0.334606] 78af000.serial: ttyMSM0 at MMIO 0x78af000 (irq = 24, base_baud = 115200) is a MSM
[ 0.334635] msm_serial: console setup on port #0
[ 0.950117] console [ttyMSM0] enabled
[ 0.955180] msm_serial: driver initialized
[ 0.961495] loop: module loaded
[ 0.964075] nand: device found, Manufacturer ID: 0xc2, Chip ID: 0xf1
[ 0.965405] nand: Macronix MX30LF1G18AC
[ 0.971973] nand: 128 MiB, SLC, erase size: 128 KiB, page size: 2048, OOB size: 64
[ 0.975584] 2 fixed-partitions partitions found on MTD device qcom_nand.0
[ 0.983181] Creating 2 MTD partitions on "qcom_nand.0":
[ 0.990034] 0x000000000000-0x000000400000 : "Bootloader"
[ 0.999957] 0x000000400000-0x000008000000 : "UBI_DEV"
[ 1.012080] random: fast init done
[ 1.120490] libphy: ipq40xx_mdio: probed
[ 1.151790] ESS reset ok!
[ 1.184810] ESS reset ok!
[ 1.603690] libphy: Fixed MDIO Bus: probed
[ 1.604661] EDMA using MAC@ - using
[ 1.604673] 66:31:37:29:7d:d9
[ 1.612852] i2c /dev entries driver
[ 1.619774] NET: Registered protocol family 17
[ 1.619868] bridge: filtering via arp/ip/ip6tables is no longer available by default. Update your scripts to load br_netfilter if you need this.
[ 1.623336] 8021q: 802.1Q VLAN Support v1.8
[ 1.636343] ThumbEE CPU extension supported.
[ 1.640153] Registering SWP/SWPB emulation handler
[ 1.652092] ubi0: attaching mtd1
[ 2.664845] ubi0: scanning is finished
[ 2.680953] ubi0 warning: ubi_eba_init: cannot reserve enough PEBs for bad PEB handling, reserved 15, need 18
[ 2.687012] ubi0: attached mtd1 (name "UBI_DEV", size 124 MiB)
[ 2.690000] ubi0: PEB size: 131072 bytes (128 KiB), LEB size: 126976 bytes
[ 2.695699] ubi0: min./max. I/O unit sizes: 2048/2048, sub-page size 2048
[ 2.702560] ubi0: VID header offset: 2048 (aligned 2048), data offset: 4096
[ 2.709411] ubi0: good PEBs: 990, bad PEBs: 2, corrupted PEBs: 0
[ 2.716174] ubi0: user volume: 7, internal volumes: 1, max. volumes count: 128
[ 2.722461] ubi0: max/mean erase counter: 615/7, WL threshold: 4096, image sequence number: 551267818
[ 2.729425] ubi0: available PEBs: 0, total reserved PEBs: 990, PEBs reserved for bad PEB handling: 15
[ 2.738747] ubi0: background thread "ubi_bgt0d" started, PID 111
[ 2.740850] block ubiblock0_5: created from ubi0:5(rootfs)
[ 2.753972] ubiblock: device ubiblock0_5 (rootfs) set to be root filesystem
[ 2.764841] VFS: Mounted root (squashfs filesystem) readonly on device 254:0.
[ 2.768580] devtmpfs: mounted
[ 2.772993] Freeing unused kernel memory: 1024K
[ 2.774071] Run /sbin/init as init process
[ 3.238316] random: crng init done
[ 3.743430] zram: Added device: zram0
[ 3.764986] zram0: detected capacity change from 0 to 16777216
[ 3.770209] init: Can't exec /usr/sbin/mkfs.ext4: No such file or directory
[ 3.788086] init: Can't mount /dev/zram0 on /tmp: No such device
[ 3.789071] init: Console is alive
[ 3.793471] init: - watchdog -
[ 3.812607] kmodloader: loading kernel modules from /etc/modules-boot.d/*
[ 3.850915] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 3.851817] ehci-platform: EHCI generic platform driver
[ 3.859030] kmodloader: done loading kernel modules from /etc/modules-boot.d/*
[ 3.868427] init: - preinit -
[ 10.429268] UBIFS (ubi0:6): background thread "ubifs_bgt0_6" started, PID 236
[ 10.465036] UBIFS (ubi0:6): recovery needed
[ 10.543300] UBIFS (ubi0:6): recovery completed
[ 10.543501] UBIFS (ubi0:6): UBIFS: mounted UBI device 0, volume 6, name "rootfs_data"
[ 10.546721] UBIFS (ubi0:6): LEB size: 126976 bytes (124 KiB), min./max. I/O unit sizes: 2048 bytes/2048 bytes
[ 10.554601] UBIFS (ubi0:6): FS size: 111230976 bytes (106 MiB, 876 LEBs), journal size 5586944 bytes (5 MiB, 44 LEBs)
[ 10.564490] UBIFS (ubi0:6): reserved for root: 4952683 bytes (4836 KiB)
[ 10.575076] UBIFS (ubi0:6): media format: w4/r0 (latest is w5/r0), UUID 1EF015AC-56D5-4237-8405-4531355FC024, small LPT model
[ 10.588236] mount_root: switching to ubifs overlay
[ 10.617266] overlayfs: upper fs does not support xattr, falling back to index=off and metacopy=off.
[ 10.624027] urandom-seed: Seeding with /etc/urandom.seed
[ 10.908292] procd: - early -
[ 10.909772] procd: - watchdog -
[ 11.555541] procd: - watchdog -
[ 11.560991] procd: - ubus -
[ 11.784478] procd: - init -
[ 12.316156] kmodloader: loading kernel modules from /etc/modules.d/*
[ 12.363643] cryptodev: driver 1.10 loaded.
[ 12.366911] Mirror/redirect action on
[ 12.373689] u32 classifier
[ 12.373717] input device check on
[ 12.375328] Actions configured
[ 12.387222] urngd: v1.0.2 started.
[ 12.459323] Bridge firewalling registered
[ 12.460566] Loading modules backported from Linux version v5.4-rc8-0-gaf42d3466bdc
[ 12.462389] Backport generated by backports.git v5.4-rc8-1-0-g368e8c51
[ 12.513495] xt_time: kernel timezone is -0000
[ 12.552871] PPP generic driver version 2.4.2
[ 12.554713] NET: Registered protocol family 24
[ 12.572121] ath10k 5.1 driver, optimized for CT firmware, probing pci device: 0x46.
[ 12.572910] ath10k_pci 0000:01:00.0: enabling device (0140 -> 0142)
[ 12.579773] ath10k_pci 0000:01:00.0: pci irq msi oper_irq_mode 2 irq_mode 0 reset_mode 0
[ 12.720793] firmware ath10k!fwcfg-pci-0000:01:00.0.txt: firmware_loading_store: map pages failed
[ 12.790896] firmware ath10k!QCA9984!hw1.0!ct-firmware-5.bin: firmware_loading_store: map pages failed
[ 12.864530] firmware ath10k!QCA9984!hw1.0!ct-firmware-2.bin: firmware_loading_store: map pages failed
[ 13.080982] firmware ath10k!QCA9984!hw1.0!firmware-6.bin: firmware_loading_store: map pages failed
[ 13.413985] ath10k_pci 0000:01:00.0: qca9984/qca9994 hw1.0 target 0x01000000 chip_id 0x00000000 sub 168c:cafe
[ 13.414034] ath10k_pci 0000:01:00.0: kconfig debug 0 debugfs 1 tracing 0 dfs 0 testmode 0
[ 13.428245] ath10k_pci 0000:01:00.0: firmware ver 10.4b-ct-9984-fW-013-e0e3a0aae api 5 features mfp,peer-flow-ctrl,txstatus-noack,wmi-10.x-CT,ratemask-CT,regdump-CT,txrate-CT,flush-all-CT,pingpong-CT,ch-regs-CT,nop-CT,set-special-CT,tx-rc-CT,cust-stats-CT,txrate2-CT,beacon-cb-CT,wmi-block-ack-CT,wmi-bcn-rc-CT crc32 3febdfdc
[ 15.752491] ath10k_pci 0000:01:00.0: board_file api 2 bmi_id 0:3 crc32 85498734
[ 21.566031] ath10k_pci 0000:01:00.0: unsupported HTC service id: 1536
[ 21.567111] ath10k_pci 0000:01:00.0: 10.4 wmi init: vdevs: 16 peers: 48 tid: 96
[ 21.571517] ath10k_pci 0000:01:00.0: msdu-desc: 2500 skid: 32
[ 21.654802] ath10k_pci 0000:01:00.0: wmi print 'P 48/48 V 16 K 144 PH 176 T 186 msdu-desc: 2500 sw-crypt: 0 ct-sta: 0'
[ 21.655602] ath10k_pci 0000:01:00.0: wmi print 'free: 81784 iram: 13028 sram: 14440'
[ 21.941364] ath10k_pci 0000:01:00.0: htt-ver 2.2 wmi-op 6 htt-op 4 cal pre-cal-file max-sta 32 raw 0 hwcrypto 1
[ 22.050348] ath: EEPROM regdomain: 0x0
[ 22.050769] ath: EEPROM indicates default country code should be used
[ 22.050820] ath: doing EEPROM country->regdmn map search
[ 22.050927] ath: country maps to regdmn code: 0x3a
[ 22.050995] ath: Country alpha2 being used: US
[ 22.051050] ath: Regpair used: 0x3a
[ 22.628648] firmware ath10k!fwcfg-ahb-a000000.wifi.txt: firmware_loading_store: map pages failed
[ 22.716023] firmware ath10k!QCA4019!hw1.0!ct-firmware-5.bin: firmware_loading_store: map pages failed
[ 22.801858] firmware ath10k!QCA4019!hw1.0!ct-firmware-2.bin: firmware_loading_store: map pages failed
[ 22.886676] firmware ath10k!QCA4019!hw1.0!firmware-6.bin: firmware_loading_store: map pages failed
[ 23.144850] ath10k_ahb a000000.wifi: qca4019 hw1.0 target 0x01000000 chip_id 0x003b00ff sub 0000:0000
[ 23.144899] ath10k_ahb a000000.wifi: kconfig debug 0 debugfs 1 tracing 0 dfs 0 testmode 0
[ 23.157774] ath10k_ahb a000000.wifi: firmware ver 10.4b-ct-4019-fW-013-e0e3a0aae api 5 features mfp,peer-flow-ctrl,txstatus-noack,wmi-10.x-CT,ratemask-CT,regdump-CT,txrate-CT,flush-all-CT,pingpong-CT,ch-regs-CT,nop-CT,set-special-CT,tx-rc-CT,cust-stats-CT,txrate2-CT,beacon-cb-CT,wmi-block-ack-CT,wmi-bcn-rc-CT crc32 a80700e6
[ 23.231300] ath10k_ahb a000000.wifi: board_file api 2 bmi_id 0:20 crc32 175ed0a4
[ 24.538800] ath10k_ahb a000000.wifi: unsupported HTC service id: 1536
[ 24.539762] ath10k_ahb a000000.wifi: 10.4 wmi init: vdevs: 16 peers: 48 tid: 96
[ 24.544321] ath10k_ahb a000000.wifi: msdu-desc: 2500 skid: 32
[ 24.591702] ath10k_ahb a000000.wifi: wmi print 'P 48/48 V 16 K 144 PH 176 T 186 msdu-desc: 2500 sw-crypt: 0 ct-sta: 0'
[ 24.592676] ath10k_ahb a000000.wifi: wmi print 'free: 56528 iram: 13304 sram: 32520'
[ 24.771642] ath10k_ahb a000000.wifi: htt-ver 2.2 wmi-op 6 htt-op 4 cal pre-cal-file max-sta 32 raw 0 hwcrypto 1
[ 24.996317] ath: EEPROM regdomain: 0x0
[ 24.996728] ath: EEPROM indicates default country code should be used
[ 24.996779] ath: doing EEPROM country->regdmn map search
[ 24.996884] ath: country maps to regdmn code: 0x3a
[ 24.996951] ath: Country alpha2 being used: US
[ 24.997006] ath: Regpair used: 0x3a
[ 25.034614] kmodloader: done loading kernel modules from /etc/modules.d/*
[ 27.919075] zram0: detected capacity change from 0 to 127926272
[ 27.926625] Adding 124924k swap on /dev/zram0. Priority:-2 extents:1 across:124924k SS
[ 31.486557] br-lan: port 1(eth0.1) entered blocking state
[ 31.486613] br-lan: port 1(eth0.1) entered disabled state
[ 31.487652] device eth0.1 entered promiscuous mode
[ 31.487691] device eth0 entered promiscuous mode
[ 31.492692] br-lan: port 1(eth0.1) entered blocking state
[ 31.492739] br-lan: port 1(eth0.1) entered forwarding state
[ 32.067454] ath: EEPROM regdomain: 0x809c
[ 32.067465] ath: EEPROM indicates we should expect a country code
[ 32.067473] ath: doing EEPROM country->regdmn map search
[ 32.067480] ath: country maps to regdmn code: 0x52
[ 32.067489] ath: Country alpha2 being used: CN
[ 32.067494] ath: Regpair used: 0x52
[ 32.067504] ath: regdomain 0x809c dynamically updated by user
[ 32.067557] ath: EEPROM regdomain: 0x809c
[ 32.067562] ath: EEPROM indicates we should expect a country code
[ 32.067568] ath: doing EEPROM country->regdmn map search
[ 32.067574] ath: country maps to regdmn code: 0x52
[ 32.067581] ath: Country alpha2 being used: CN
[ 32.067586] ath: Regpair used: 0x52
[ 32.067593] ath: regdomain 0x809c dynamically updated by user
[ 39.521373] ath10k_pci 0000:01:00.0: unsupported HTC service id: 1536
[ 39.521541] ath10k_pci 0000:01:00.0: 10.4 wmi init: vdevs: 16 peers: 48 tid: 96
[ 39.521553] ath10k_pci 0000:01:00.0: msdu-desc: 2500 skid: 32
[ 39.597421] ath10k_pci 0000:01:00.0: wmi print 'P 48/48 V 16 K 144 PH 176 T 186 msdu-desc: 2500 sw-crypt: 0 ct-sta: 0'
[ 39.598223] ath10k_pci 0000:01:00.0: wmi print 'free: 81784 iram: 13028 sram: 14440'
[ 39.974558] ath10k_pci 0000:01:00.0: Firmware lacks feature flag indicating a retry limit of > 2 is OK, requested limit: 4
[ 39.994414] br-lan: port 2(wlan0-1) entered blocking state
[ 39.994460] br-lan: port 2(wlan0-1) entered disabled state
[ 39.995766] device wlan0-1 entered promiscuous mode
[ 40.281969] ath10k_pci 0000:01:00.0: NOTE: Firmware DBGLOG output disabled in debug_mask: 0x10000000
[ 43.101771] wlan0: authenticate with 04:40:a9:91:06:54
[ 43.369591] wlan0: send auth to 04:40:a9:91:06:54 (try 1/3)
[ 43.377368] wlan0: authenticated
[ 43.380518] wlan0: associate with 04:40:a9:91:06:54 (try 1/3)
[ 43.386602] wlan0: RX AssocResp from 04:40:a9:91:06:54 (capab=0x411 status=0 aid=3)
[ 43.393159] wlan0: associated
[ 43.414300] ath10k_pci 0000:01:00.0: Invalid peer id 0 or peer stats buffer, peer: d79d6dd3 sta: (null)
[ 43.444514] wlan0: Limiting TX power to 30 (30 - 0) dBm as advertised by 04:40:a9:91:06:54
[ 43.514812] br-lan: port 2(wlan0-1) entered blocking state
[ 43.514843] br-lan: port 2(wlan0-1) entered forwarding state
[ 455.026748] ath10k_pci 0000:01:00.0: Invalid VHT mcs 15 peer stats
What the hell is "custom build from x-wrt"?
x-wrt used to be an ancient GUI for OpenWrt, but apparently there is now a new OpenWrt fork calling itself x-wrt.
You might discuss your problems on their website, as the problems might well be related to their modifications that we know nothing about.
openwrt snapshot, adding a custom X feeds
Is an additional millisecond of latency to the router an actual issue? Is it causing problems with connecting to the internet? Or latency to internet hosts?
Not really sure what you're expecting to troubleshoot if I'm honest...
it's just abnormal to get high latency in a wired connection. So I come here ask for help. what i'm solving is not reducing latency from 10ms to 8ms for wireless, it's reducing latency from 3ms to sub 1ms for wired connection.
when you finally figure out what i'm asking for help, you will know how important it is.