Help setup OpenWrt VPN with single port TL-WR802N

[asyba]

I just fond this

OpenVPN in Dumb AP

The problem here is that your devices are all using the ISP router as the gateway to the internet, which means that they aren't going to be tunneled through the VPN. You need to tell your client devices to use the OpenWrt device as the gateway in order to have the traffic go through the tunnel. You can see if your setup generally works by setting a client device with manual/static IP information... you need to populate the IP, subnet mask, dns, and router/gateway. To do this properly, you will …

If on my device that connects to the AP, I Ignore the auto DHCP and set the Gateway manually to the OpenWRT IP and not the main router, the VPN works on the device!!