# Help set up DumbAP

**URL:** <https://forum.openwrt.org/t/help-set-up-dumbap/99733>\
**Category:** Network and Wireless Configuration\
**Created:** [June 22, 2021, 11:12am UTC](https://forum.openwrt.org/t/help-set-up-dumbap/99733 "2021-06-22T11:12:48Z")\
**Posts on this page:** 1\
**Showing post:** 4

<div class="post-metadata">

**Author:** ![frollic](https://forum.openwrt.org/user_avatar/forum.openwrt.org/frollic/32/30113_2.png) [@frollic](https://forum.openwrt.org/u/frollic)\
**Post date:** [June 22, 2021, 11:44am UTC](https://forum.openwrt.org/t/help-set-up-dumbap/99733/4 "2021-06-22T11:44:22Z")

</div>

Not what I'm aware of.

but the configuration changes you're making can easily be made in LuCI.

> [@Mini tutorial for DSA network config](https://forum.openwrt.org/t/mini-tutorial-for-dsa-network-config/96998):
>
> Update from 2021-05-31: Option ifname was renamed to device This tutorial is valid for 21.02-rc2 (or newer) and recent snapshots Introduction DSA stands for Distributed Switch Architecture and is Linux kernel subsystem for network switches. It's an upstream replacement for OpenWrt's swconfig framework and many new routers use DSA drivers instead of swconfig drivers. In DSA each switch port is a separated Linux interface. It means ip / ifconfig command will show interfaces like lan1, lan2, w…

---

_[View the full topic](https://forum.openwrt.org/t/help-set-up-dumbap/99733)._
