Help on DNS leak

[sunilalw2007]

Hi,
I have below configuration with OpenWrt, Can someone suggest, what I missed with below configuration

Can we avoid VPN for lan and locally hosted services?

Yes, i have tested it, it's working as default connection, if i am using bellow option route_allowed_ips '1' Else wan is default { "kernel": "5.10.161", "hostname": "OpenWrt", "system": "MediaTek MT7621 ver:1 eco:3", "model": "D-Link DIR-2640 A1", "board_name": "dlink,dir-2640-a1", "rootfs_type": "squashfs", "release": { "distribution": "OpenWrt", "version": "22.03.3", "revision": "r20028-…

Thanks.

[lleachii]

@sunilalw2007

Can someone suggest, what I missed with below configuration

@lleachii

@sunilalw2007

i am looking solution for dns leak.

• You really should use 1 thread for 1 issue
• See (the example uses 9.9.9.9):

That is incorrect. It would use whatever IP you assign them. There is no "advertised by WG". Wireguard peers are statically configured. In fact, I never suggested editing the WG config. So did you try? Eg, use 9.9.9.9: Assign all clients the DNS server 9.9.9.9 Then: config route option target '9.9.9.9' option netmask '255.255.255.255' option interface 'wg0' or config route option target '9.9.9.9/32' option interface 'wg0' You can choose any IP, so…

Also, from your deleted post, I see you started using the PBR app and failed to otherwise mention that, so you'll need to translate my instructions to PBR-compatiable rules.