Help me to unbrick my tplink tl-wr841n v14

Installing and Using OpenWrt
1

There is my putty consol log

U-Boot 1.1.3 (Nov 19 2019 - 14:34:46)

Board: Ralink APSoC DRAM:  32 MB
relocate_code Pointer at: 81fc0000
******************************
Software System Reset Occurred
******************************
flash manufacture id: c8, device id 40 16
find flash: GD25Q32B
============================================
Ralink UBoot Version: 4.3.0.0
--------------------------------------------
ASIC 7628_MP (Port5<->None)
DRAM component: 256 Mbits DDR, width 16
DRAM bus: 16 bit
Total memory: 32 MBytes
Flash component: SPI Flash
Date:Nov 19 2019  Time:14:34:46
============================================
icache: sets:512, ways:4, linesz:32 ,total:65536
dcache: sets:256, ways:4, linesz:32 ,total:32768

 ##### The CPU freq = 580 MHZ ####
 estimate memory size =32 Mbytes
RESET MT7628 PHY!!!!!!
continue to starting system.                                                  0
disable switch phyport...

3: System Boot system code via Flash.(0xbc010000)
do_bootm:argc=2, addr=0xbc010000
## Booting image at bc010000 ...
   Uncompressing Kernel Image ... LZMA ERROR 1 - must RESET board to recover

[04020C0F][04020D09][89880000][24234746][00242346]
DU Setting Cal Done


U-Boot 1.1.3 (Nov 19 2019 - 14:34:46)

Board: Ralink APSoC DRAM:  32 MB
relocate_code Pointer at: 81fc0000
******************************
Software System Reset Occurred
******************************
flash manufacture id: c8, device id 40 16
find flash: GD25Q32B
============================================
Ralink UBoot Version: 4.3.0.0
--------------------------------------------
ASIC 7628_MP (Port5<->None)
DRAM component: 256 Mbits DDR, width 16
DRAM bus: 16 bit
Total memory: 32 MBytes
Flash component: SPI Flash
Date:Nov 19 2019  Time:14:34:46
============================================
icache: sets:512, ways:4, linesz:32 ,total:65536
dcache: sets:256, ways:4, linesz:32 ,total:32768

 ##### The CPU freq = 580 MHZ ####
 estimate memory size =32 Mbytes
RESET MT7628 PHY!!!!!!
continue to starting system.                                                  0
disable switch phyport...

3: System Boot system code via Flash.(0xbc010000)
do_bootm:argc=2, addr=0xbc010000
## Booting image at bc010000 ...
   Uncompressing Kernel Image ... LZMA ERROR 1 - must RESET board to recover

[04020C0F][04020D09][89880000][24244847][00242447]
DU Setting Cal Done


U-Boot 1.1.3 (Nov 19 2019 - 14:34:46)

Board: Ralink APSoC DRAM:  32 MB
relocate_code Pointer at: 81fc0000
******************************
Software System Reset Occurred
******************************
flash manufacture id: c8, device id 40 16
find flash: GD25Q32B
============================================
Ralink UBoot Version: 4.3.0.0
--------------------------------------------
ASIC 7628_MP (Port5<->None)
DRAM component: 256 Mbits DDR, width 16
DRAM bus: 16 bit
Total memory: 32 MBytes
Flash component: SPI Flash
Date:Nov 19 2019  Time:14:34:46
============================================
icache: sets:512, ways:4, linesz:32 ,total:65536
dcache: sets:256, ways:4, linesz:32 ,total:32768

 ##### The CPU freq = 580 MHZ ####
 estimate memory size =32 Mbytes
RESET MT7628 PHY!!!!!!
continue to starting system.                                                  0
disable switch phyport...

3: System Boot system code via Flash.(0xbc010000)
do_bootm:argc=2, addr=0xbc010000
## Booting image at bc010000 ...
   Uncompressing Kernel Image ... LZMA ERROR 1 - must RESET board to recover

[04020C0E][04020D08][89880000][25244847][00252447]
DU Setting Cal Done


U-Boot 1.1.3 (Nov 19 2019 - 14:34:46)

Board: Ralink APSoC DRAM:  32 MB
relocate_code Pointer at: 81fc0000
******************************
Software System Reset Occurred
******************************
flash manufacture id: c8, device id 40 16
find flash: GD25Q32B
============================================
Ralink UBoot Version: 4.3.0.0
--------------------------------------------
ASIC 7628_MP (Port5<->None)
DRAM component: 256 Mbits DDR, width 16
DRAM bus: 16 bit
Total memory: 32 MBytes
Flash component: SPI Flash
Date:Nov 19 2019  Time:14:34:46
============================================
icache: sets:512, ways:4, linesz:32 ,total:65536
dcache: sets:256, ways:4, linesz:32 ,total:32768

 ##### The CPU freq = 580 MHZ ####
 estimate memory size =32 Mbytes
RESET MT7628 PHY!!! 0
TODO, Read MAC Address from Flash
2

Please move this topic to the category for "Installing and Using OpenWrt"

1 Like
3

Nice forum. Here i found my solution.

4

This topic was automatically closed 10 days after the last reply. New replies are no longer allowed.