Help in unbricking TP-Link Archer C60 V3

[tmomas]

Seems to be difficult to go back to C60 v3 stock firmware:

"Going back to original firmware" and "stripped images"

Amazing! "BR" would be 42 52... Well... I tried the TFTP method with these firmwares from US and EU, and the result was a "bricked" device that I recovered by using the OpenWRT snaphot for my device. So, I guess that, if the firmwares wasn't "accepted" by my device because "BR" isn't supported, I could change the bin file to artificially supports my BR device, and theoretically, it should work. How much I could be possible wrong? UPDATE: actually 42 52 is there... so no binary change…

Archer C60 v3 - is possible to install OpenWrt firmware?

But be aware that for me TFTP didn't work with vendor firmware image, so if you flash OpenWrt you might have to stick to it. Actually, I'd be very interested if someone here could try to reproduce that (and thus prove that it's not me doing it wrong). TFTP with stock image is not working, but TFTP with OpenWrt factory image works fine.