Help for bug in 5Ghz ( sta_info.c )

I have this error when i use wifi master <-> Client , only in 5G with two same router Tenbay T-MB5EU_v01

WIFI error is wlan1: failed to insert STA entry for the AP (error -22)

[ 1738.950236] wlan1: authenticate with 00:0c:43:26:59:97
[ 1739.090311] ------------[ cut here ]------------
[ 1739.095068] WARNING: CPU: 0 PID: 1695 at backports-5.10.42-1/net/mac80211/sta_info.c:546 ieee80211_find_sta_by_ifaddr+0x118/0x180 [mac80211]
[ 1739.107720] Modules linked in: pppoe ppp_async iptable_nat xt_state xt_nat xt_conntrack xt_REDIRECT xt_MASQUERADE xt_FLOWOFFLOAD pppox ppp_generic nf_nat nf_flow_table_hw nf_flow_table nf_conntrack_netlink nf_conntrack mt7915e mt76 mac80211 ipt_REJECT cfg80211 yealink xt_time xt_tcpudp xt_multiport xt_mark xt_mac xt_limit xt_comment xt_TCPMSS xt_LOG ums_usbat ums_sddr55 ums_sddr09 ums_karma ums_jumpshot ums_isd200 ums_freecom ums_datafab ums_cypress ums_alauda slhc nfnetlink nf_reject_ipv4 nf_log_ipv4 nf_defrag_ipv6 nf_defrag_ipv4 iptable_mangle iptable_filter ip_tables hwmon crc_ccitt compat cdc_wdm fuse evdev input_core nf_log_ipv6 nf_log_common ip6table_mangle ip6table_filter ip6_tables ip6t_REJECT x_tables nf_reject_ipv6 vfat fat autofs4 nls_utf8 nls_iso8859_1 nls_cp437 sha256_generic libsha256 seqiv jitterentropy_rng drbg hmac ghash_generic gf128mul gcm ctr cmac ccm uas usb_storage leds_gpio xhci_plat_hcd xhci_pci xhci_mtk xhci_hcd uhci_hcd fsl_mph_dr_of ehci_platform ehci_fsl sd_mod
[ 1739.107941]  scsi_mod ehci_hcd gpio_button_hotplug reiserfs ext4 mbcache jbd2 exfat(C) antfs usbcore nls_base usb_common crc32c_generic
[ 1739.207549] CPU: 0 PID: 1695 Comm: wpa_supplicant Tainted: G        WC        5.4.145 #0
[ 1739.215600] Stack : 00000001 8007bff0 80710000 80710a3c 80780000 80710a04 8070fb94 8e1e1914
[ 1739.223922]         808b0000 806a17a0 8facc728 8075cd03 00000000 00000001 8e1e18b8 a364ac7b
[ 1739.232241]         00000000 00000000 808f0000 00000000 00000030 00000382 20202043 20202020
[ 1739.240559]         00000000 8e1e17e1 ffffffff ffffffff 80000000 00000001 00000000 8dd06918
[ 1739.248877]         00000009 8d6a5c30 8d6a4c20 8e7722cc 00000003 80395064 00000000 808b0000
[ 1739.257194]         ...
[ 1739.259627] Call Trace:
[ 1739.262084] [<8000b48c>] show_stack+0x30/0x100
[ 1739.266520] [<805e6f38>] dump_stack+0x9c/0xc8
[ 1739.270870] [<8002b9f8>] __warn+0xcc/0x118
[ 1739.274945] [<8002baa0>] warn_slowpath_fmt+0x5c/0xac
[ 1739.280004] [<8dd06918>] ieee80211_find_sta_by_ifaddr+0x118/0x180 [mac80211]
[ 1739.287069] [<8dd087b0>] sta_info_insert+0x34/0x9c [mac80211]
[ 1739.292843] [<8dd4d524>] ieee80211_chswitch_done+0x1914/0x28a0 [mac80211]
[ 1739.299801] ---[ end trace 3e5b0bc071a44ded ]---
[ 1739.304404] wlan1: failed to insert STA entry for the AP (error -22)

So, you get the same error on both devices?

Log is only for the Slave in 5Ghz , Master is without error

Perhaps your configuration is incorrect - can you show your wireless configuration

My configuration is good

I have found a similar problem but with ( error -460 )
*
WARNING: CPU: 0 PID: 7070 at backports-4.19.137-1/net/mac80211/sta_info.c:460 0x876066f8 [mac80211@87600000+0x6c5e0]
*
Also same error 22
9228.344723] wlan0: failed to insert STA entry for the AP (error -22)
Sun Dec 13 01:09:57 2020 daemon.notice wpa_supplicant[7070]: wlan0: SME: Authentication request to the driver failed
*

I think that is a driver problem WIFI 6 / AX ...

News with OpenWrt SNAPSHOT r18285-dd681838d3 / LuCI Master git-21.336.35676-ff4f529

WIth 2 for same client on same box ...
Always error code 22 in console

After a little speeds are fine -> some 1200 MBits/s

Computer -> LAN ( OpenWrt 1 ) <--> WIFI AX <--> ( OpenWrt 2 ) LAN <--> Master Router Livebox 5 <--fiber

Openwrt are with 2 * KuWfi Tenbay WIFI-6 AX T-MB5EU-V01