Hi. I have managed to connect through the serial port and get the CFE, but the ctri-c does not work to put the commands. Any ideas?
done
Found a Winbond NAND flash:
Total size: 128MB
Block size: 128KB
Page Size: 2048B
OOB Size: 64B
Sector size: 512B
Spare size: 16B
ECC level: 8 (8-bit)
Device ID: 0xef 0xf1 0x00 0x95 0x00 0x00
CFE version 6.37.14.93 (r469350) based on BBP 1.0.37 for BCM947XX (32bit,SP,)
Build Date: Sun Sep 18 09:25:08 CST 2016 (root@localhost.BSPLJF)
Copyright (C) 2000-2008 Broadcom Corporation.
Init Arena
Init Devs.
Boot partition size = 262144(0x40000)
DDR Clock: 400 MHz
Warning: invalid DDR setting of 0 MHz ignored. DDR frequency will be set to 400 MHz.
CPU type 0x0: 800MHz
Tot mem: 262144 KBytes
CFE mem: 0x00F00000 - 0x017D888C (9275532)
Data: 0x00F5FC18 - 0x00F612C4 (5804)
BSS: 0x00F612D0 - 0x00FD688C (480700)
Heap: 0x00FD688C - 0x017D688C (8388608)
Stack: 0x017D688C - 0x017D888C (8192)
Text: 0x00F00000 - 0x00F53D54 (343380)
Boot: 0x017D9000 - 0x01819000
Reloc: I:00000000 - D:00000000
upgrade wait time is 3s
**upgrade_wait over!
Loader:raw Filesys:tftp Dev:(null) File:: Options:(null)
Loading: Failed.
Could not load :: Error
Loader:raw Filesys:raw Dev:nflash0.os File: Options:(null)
Loading: .. 1433424 bytes read
Entry at 0x00008000
Starting program at 0x00008000
Uncompressing Linux... done, booting the kernel.
[ 0.000000] Booting Linux on physical CPU 0x0
[ 0.000000] Linux version 4.4.92 (buildbot@builds-02.infra.lede-project.org) (gcc version 5.4.0 (LEDE GCC 5.4.0 r3103-1b51a49) ) #0 SMP Tue Oct 17 17:46:20 2 017
[ 0.000000] CPU: ARMv7 Processor [413fc090] revision 0 (ARMv7), cr=10c5387d
[ 0.000000] CPU: PIPT / VIPT nonaliasing data cache, VIPT aliasing instructio n cache
[ 0.000000] Machine model: Asus RT-AC68U (BCM4708)
[ 0.000000] Memory policy: Data cache writealloc
[ 0.000000] PERCPU: Embedded 11 pages/cpu @c6dcd000 s12928 r8192 d23936 u4505 6
[ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pag es: 65280
[ 0.000000] Kernel command line: console=ttyS0,115200
[ 0.000000] PID hash table entries: 512 (order: -1, 2048 bytes)
[ 0.000000] Dentry cache hash table entries: 16384 (order: 4, 65536 bytes)
[ 0.000000] Inode-cache hash table entries: 8192 (order: 3, 32768 bytes)
[ 0.000000] Memory: 255312K/262144K available (3334K kernel code, 113K rwdata , 484K rodata, 228K init, 285K bss, 6832K reserved, 0K cma-reserved, 131072K hig hmem)
[ 0.000000] Virtual kernel memory layout:
[ 0.000000] vector : 0xffff0000 - 0xffff1000 ( 4 kB)
[ 0.000000] fixmap : 0xffc00000 - 0xfff00000 (3072 kB)
[ 0.000000] vmalloc : 0xc8800000 - 0xff800000 ( 880 MB)
[ 0.000000] lowmem : 0xc0000000 - 0xc8000000 ( 128 MB)
[ 0.000000] pkmap : 0xbfe00000 - 0xc0000000 ( 2 MB)
[ 0.000000] modules : 0xbf000000 - 0xbfe00000 ( 14 MB)
[ 0.000000] .text : 0xc0008000 - 0xc03c2e44 (3820 kB)
[ 0.000000] .init : 0xc03c3000 - 0xc03fc000 ( 228 kB)
[ 0.000000] .data : 0xc03fc000 - 0xc04185c8 ( 114 kB)
[ 0.000000] .bss : 0xc04185c8 - 0xc045fdb8 ( 286 kB)
[ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=2, Nodes=1
[ 0.000000] Hierarchical RCU implementation.
[ 0.000000] NR_IRQS:16 nr_irqs:16 16
[ 0.000000] L2C: DT/platform modifies aux control register: 0x0a130000 -> 0x0 a530000
[ 0.000000] L2C-310 enabling early BRESP for Cortex-A9
[ 0.000000] L2C-310 full line of zeros enabled for Cortex-A9
[ 0.000000] L2C-310 ID prefetch enabled, offset 1 lines
[ 0.000000] L2C-310 dynamic clock gating enabled, standby mode enabled
[ 0.000000] L2C-310 cache controller enabled, 16 ways, 256 kB
[ 0.000000] L2C-310: CACHE_ID 0x410000c8, AUX_CTRL 0x7e530001
[ 0.000016] sched_clock: 64 bits at 400MHz, resolution 2ns, wraps every 43980 46511103ns
[ 0.000042] clocksource: arm_global_timer: mask: 0xffffffffffffffff max_cycle s: 0x5c4093a7d1, max_idle_ns: 440795210635 ns
[ 0.000300] Calibrating delay loop... 1594.16 BogoMIPS (lpj=7970816)
[ 0.090151] pid_max: default: 32768 minimum: 301
[ 0.090251] Mount-cache hash table entries: 1024 (order: 0, 4096 bytes)
[ 0.090264] Mountpoint-cache hash table entries: 1024 (order: 0, 4096 bytes)
[ 0.090871] CPU: Testing write buffer coherency: ok
[ 0.091220] CPU0: thread -1, cpu 0, socket 0, mpidr 80000000
[ 0.091301] Setting up static identity map for 0x82a0 - 0x82d4
[ 0.130149] CPU1: thread -1, cpu 1, socket 0, mpidr 80000001
[ 0.130247] Brought up 2 CPUs
[ 0.130271] SMP: Total of 2 processors activated (3188.32 BogoMIPS).
[ 0.130281] CPU: WARNING: CPU(s) started in wrong/inconsistent modes (primary CPU mode 0x13)
[ 0.130288] CPU: This may indicate a broken bootloader or firmware.
[ 0.132935] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, ma x_idle_ns: 19112604462750000 ns
[ 0.132965] futex hash table entries: 512 (order: 3, 32768 bytes)
[ 0.133157] pinctrl core: initialized pinctrl subsystem
[ 0.133961] NET: Registered protocol family 16
[ 0.134759] DMA: preallocated 256 KiB pool for atomic coherent allocations
[ 0.162647] clocksource: Switched to clocksource arm_global_timer
[ 0.163938] NET: Registered protocol family 2
[ 0.164672] TCP established hash table entries: 1024 (order: 0, 4096 bytes)
[ 0.164701] TCP bind hash table entries: 1024 (order: 1, 8192 bytes)
[ 0.164727] TCP: Hash tables configured (established 1024 bind 1024)
[ 0.164810] UDP hash table entries: 256 (order: 1, 8192 bytes)
[ 0.164851] UDP-Lite hash table entries: 256 (order: 1, 8192 bytes)
[ 0.165055] NET: Registered protocol family 1
[ 0.166874] Crashlog allocated RAM at address 0x3f00000
[ 0.173968] squashfs: version 4.0 (2009/01/31) Phillip Lougher
[ 0.173999] jffs2: version 2.2 (NAND) (SUMMARY) (LZMA) (RTIME) (CMODE_PRIORIT Y) (c) 2001-2006 Red Hat, Inc.
[ 0.176148] bounce: pool size: 64 pages
[ 0.176167] io scheduler noop registered
[ 0.176176] io scheduler deadline registered (default)
[ 0.176710] Serial: 8250/16550 driver, 16 ports, IRQ sharing enabled
[ 0.179277] console [ttyS0] disabled
[ 0.179366] 18000300.serial: ttyS0 at MMIO 0x18000300 (irq = 18, base_baud = 6250000) is a 16550
[ 0.614101] console [ttyS0] enabled
[ 0.619308] nand: Could not find valid ONFI parameter page; aborting
[ 0.625730] nand: device found, Manufacturer ID: 0xef, Chip ID: 0xf1
[ 0.632073] nand: Unknown NAND 128MiB 3,3V 8-bit
[ 0.636671] nand: 128 MiB, SLC, erase size: 128 KiB, page size: 2048, OOB siz e: 64
[ 0.644244] iproc_nand 18028000.nand: detected 128MiB total, 128KiB blocks, 2 KiB pages, 16B OOB, 8-bit, BCH-8
[ 0.654159] Scanning device for bad blocks
[ 1.068597] mtd_read error while parsing (offset: 0x20000): -74
[ 1.074968] mtd_read error while parsing (offset: 0x40000): -74
[ 1.081329] mtd_read error while parsing (offset: 0x60000): -74
.......
[ 6.089281] 5 bcm47xxpart partitions found on MTD device brcmnand.0
[ 6.095536] Creating 5 MTD partitions on "brcmnand.0":
[ 6.100665] 0x000000000000-0x000000080000 : "boot"
[ 6.106588] 0x000000080000-0x000000200000 : "nvram"
[ 6.112454] 0x000000200000-0x000008000000 : "firmware"
[ 6.119189] 0x00000020001c-0x000000600000 : "linux"
[ 6.125115] 0x000000600000-0x000008000000 : "ubi"
[ 6.132517] libphy: Fixed MDIO Bus: probed
[ 6.136695] bgmac_bcma: Broadcom 47xx GBit MAC driver loaded
[ 6.142905] bcma: bus0: Found chip with id 53010, rev 0x00 and package 0x02
[ 6.149931] bcma: bus0: Core 0 found: ChipCommon (manuf 0x4BF, id 0x800, rev 0x2A, class 0x0)
[ 6.158625] bcma: bus0: Core 1 found: Chipcommon B (manuf 0x4BF, id 0x50B, rev 0x01, class 0x0)
[ 6.167476] bcma: bus0: Core 2 found: DMA (manuf 0x4BF, id 0x502, rev 0x01, class 0x0)
[ 6.175540] bcma: bus0: Core 3 found: GBit MAC (manuf 0x4BF, id 0x82D, rev 0x05, class 0x0)
[ 6.184027] bcma: bus0: Core 4 found: GBit MAC (manuf 0x4BF, id 0x82D, rev 0x05, class 0x0)
[ 6.192502] bcma: bus0: Core 5 found: GBit MAC (manuf 0x4BF, id 0x82D, rev 0x05, class 0x0)
[ 6.201004] bcma: bus0: Core 6 found: GBit MAC (manuf 0x4BF, id 0x82D, rev 0x05, class 0x0)
[ 6.209392] bcma: bus0: Core 7 found: PCIe Gen 2 (manuf 0x4BF, id 0x501, rev 0x01, class 0x0)
[ 6.218001] bcma: bus0: Core 8 found: PCIe Gen 2 (manuf 0x4BF, id 0x501, rev 0x01, class 0x0)
[ 6.226630] bcma: bus0: Core 9 found: PCIe Gen 2 (manuf 0x4BF, id 0x501, rev 0x01, class 0x0)
[ 6.235290] bcma: bus0: Core 10 found: ARM Cortex A9 core (ihost) (manuf 0x4BF, id 0x510, rev 0x01, class 0x0)
[ 6.245372] bcma: bus0: Core 11 found: USB 2.0 (manuf 0x4BF, id 0x504, rev 0x01, class 0x0)
[ 6.253822] bcma: bus0: Core 12 found: USB 3.0 (manuf 0x4BF, id 0x505, rev 0x01, class 0x0)
[ 6.262308] bcma: bus0: Core 13 found: SDIO3 (manuf 0x4BF, id 0x503, rev 0x01, class 0x0)
[ 6.270613] bcma: bus0: Core 14 found: ARM Cortex A9 JTAG (manuf 0x4BF, id 0x506, rev 0x01, class 0x0)
[ 6.280037] bcma: bus0: Core 15 found: Denali DDR2/DDR3 memory controller (manuf 0x4BF, id 0x507, rev 0x01, class 0x0)
[ 6.290850] bcma: bus0: Core 16 found: ROM (manuf 0x4BF, id 0x508, rev 0x01, class 0x0)
[ 6.298967] bcma: bus0: Core 17 found: NAND flash controller (manuf 0x4BF, id 0x509, rev 0x01, class 0x0)
[ 6.308657] bcma: bus0: Core 18 found: SPI flash controller (manuf 0x4BF, id 0x50A, rev 0x01, class 0x0)
[ 6.318125] bcma: bus0: Flash type not supported
[ 6.326467] bgmac_bcma bcma0:3: Found PHY addr: 0
[ 6.331253] bgmac_bcma bcma0:3: Invalid MAC addr: 00:00:00:00:00:00
[ 6.337524] bgmac_bcma bcma0:3: Using random MAC: be:c3:71:bd:6c:40