Self hosted services still dont work for me. (i found out about today)
Setup:
Port forward of port 443 (ssl) to internal device (WAN->LAN)
Access from other device in internet returns Connection Reset, as soon as it gets accessed.
When i disable the above iptables rule everything magically works again.
This is just a very initial test with a BT HH5a (using its internal VDSL2 modem with vectoring and PPPoE) and kernel 4.14/ flowoffload (r6313-c5b06da56), but the results are pretty nice.
http://www.dslreports.com/speedtest jumps from 73.3/ 37.8 MBit/s to 84.3/ 37.3 MBit/s, overall and quality evaluations improve slightly (from A to A+, bufferbloat=A, neither adblock nor sqm are enabled).
Downloading a single (623 MB) large file gets significantly faster "623,00M 11,2MB/s in 64s" vs. "623,00M 4,86MB/s in 98s".
Adding irqbalance to the mix (no manual optimizations, just invoking irqbalance) improves the dslreports speedtest to 97.4/ 37.6 MBit/s, that is -within the margin of error- even slightly better than using a combination of an external Draytek Vigor 130 and a ZyXEL NBG6817. The results seem to have a slightly higher variance (it does still get pushed quite a bit) with the BT HH5a (with irqbalance and flowoffload) compared to my normal setup (vigor 130, nbg6817), but they're pretty comparable.
@Plonk34 I think you were interested in figures about the BT HH5a recently.
I have some issues with Flow Offload. When i run "conntrack -L", show a very high flows entries with states LAST_ACK, FIN_WAIT and TIME_WAIT and high numbers of flows too > 1000.
git clone git://git.openwrt.org/openwrt/staging/nbd.git nbd
cd nbd
./scripts/feeds update -a
./scripts/feeds install -a
make menuconfig
make defconfig
make
ok im trying to compile your tree but i get
scripts/feeds install -a
Makefile:17: *** ERROR: The path to the OpenWrt directory must not include any spaces. Stop.
am i being a complete spoon ? im assuming i need the openwrt source then nbd tree is a directory inside that ?