Grandstream anone?

Hello Forum!

I was wondering as anyone tried Grandstream (GWN7630 for ex) yet?
Datasheet looks promissing.

Since ubiquiti installed theyre "ultimate cloud key solution" its not my favorite anymore and i am looking for an alternative.

Thanks
Stephan

What does the datasheet say regarding SoC, RAM + Flash?

Hello Thomas.

Its telling us nothing. They have severeal devices, cheaper than ubiquiti.

I am thinking about ordering one and opening it.

Stephan

EDIT:

MT7815n CPU cant see the rest of the chips on my mobile.

1x MT7621AT
2x MT7615N
1x Winbond W632GG6MB-12
1x ATO AFND1G08U3-CKA
4x detachable antenna
1x Button
0x USB
2x Gbit Eth

Does not look that bad

Quite old kernel, but:

*************** dmesg *****************

[    0.000000] Linux version 3.10.14 (git@git) (gcc version 4.8.3 (**OpenWrt/Linaro** GCC 4.8-2014.04 unknown) ) #1 SMP Thu May 14 17:17:11 CST 2020
[    0.000000] 
[    0.000000]  The CPU feqenuce set to 880 MHz
[    0.000000] GCMP present
[    0.000000] CPU0 revision is: 0001992f (MIPS 1004Kc)
[    0.000000] Software DMA cache coherency
[    0.000000] Determined physical RAM map:
[    0.000000]  memory: 10000000 @ 00000000 (usable)
[    0.000000] Initrd not found or empty - disabling initrd
[    0.000000] Zone ranges:
[    0.000000]   DMA      [mem 0x00000000-0x00ffffff]
[    0.000000]   Normal   [mem 0x01000000-0x0fffffff]
[    0.000000] Movable zone start for each node
[    0.000000] Early memory node ranges
[    0.000000]   node   0: [mem 0x00000000-0x0fffffff]
[    0.000000] On node 0 totalpages: 65536
[    0.000000] free_area_init_node: node 0, pgdat 81471880, node_mem_map 8151b000
[    0.000000]   DMA zone: 32 pages used for memmap
[    0.000000]   DMA zone: 0 pages reserved
[    0.000000]   DMA zone: 4096 pages, LIFO batch:0
[    0.000000]   Normal zone: 480 pages used for memmap
[    0.000000]   Normal zone: 61440 pages, LIFO batch:15
[    0.000000] Detected 3 available secondary CPU(s)
[    0.000000] Primary instruction cache 32kB, 4-way, VIPT, linesize 32 bytes.
[    0.000000] Primary data cache 32kB, 4-way, PIPT, no aliases, linesize 32 bytes
[    0.000000] MIPS secondary cache 256kB, 8-way, linesize 32 bytes.
[    0.000000] PERCPU: Embedded 7 pages/cpu @8171e000 s6720 r8192 d13760 u32768
[    0.000000] pcpu-alloc: s6720 r8192 d13760 u32768 alloc=8*4096
[    0.000000] pcpu-alloc: [0] 0 [0] 1 [0] 2 [0] 3 
[    0.000000] Built 1 zonelists in Zone order, mobility grouping on.  Total pages: 65024
[    0.000000] Kernel command line: ubi.mtd=firmwareB ubi.mtd=firmwareA ubi.mtd=remain rootfsname=ubi0:ubi_rootfs rootfstype=squashfs mtdparts=MT7621-NAND:512k(uboot),256k(uboot-env),256k(art),256k(factory),256k(oops),32768k(firmwareA),32768k(firmwareB),-(remain) console=null production=1
[    0.000000] PID hash table entries: 1024 (order: 0, 4096 bytes)
[    0.000000] Dentry cache hash table entries: 32768 (order: 5, 131072 bytes)
[    0.000000] Inode-cache hash table entries: 16384 (order: 4, 65536 bytes)
[    0.000000] Writing ErrCtl register=0001e030
[    0.000000] Readback ErrCtl register=0001e030
[    0.000000] Memory: 254536k/262144k available (3631k kernel code, 7608k reserved, 917k data, 244k init, 0k highmem)
[    0.000000] Hierarchical RCU implementation.
[    0.000000] NR_IRQS:128
[    0.028000] Calibrating delay loop... 577.53 BogoMIPS (lpj=1155072)
[    0.028000] pid_max: default: 32768 minimum: 301
[    0.028000] Mount-cache hash table entries: 512
[    0.028000] launch: starting cpu1
[    0.028000] launch: cpu1 gone!
[    0.028000] CPU1 revision is: 0001992f (MIPS 1004Kc)
[    0.028000] Primary instruction cache 32kB, 4-way, VIPT, linesize 32 bytes.
[    0.028000] Primary data cache 32kB, 4-way, PIPT, no aliases, linesize 32 bytes
[    0.028000] MIPS secondary cache 256kB, 8-way, linesize 32 bytes.
[    0.060000] Synchronize counters for CPU 1: done.
[    0.064000] launch: starting cpu2
[    0.064000] launch: cpu2 gone!
[    0.064000] CPU2 revision is: 0001992f (MIPS 1004Kc)
[    0.064000] Primary instruction cache 32kB, 4-way, VIPT, linesize 32 bytes.
[    0.064000] Primary data cache 32kB, 4-way, PIPT, no aliases, linesize 32 bytes
[    0.064000] MIPS secondary cache 256kB, 8-way, linesize 32 bytes.
[    0.096000] Synchronize counters for CPU 2: done.
[    0.100000] launch: starting cpu3
[    0.100000] launch: cpu3 gone!
[    0.100000] CPU3 revision is: 0001992f (MIPS 1004Kc)
[    0.100000] Primary instruction cache 32kB, 4-way, VIPT, linesize 32 bytes.
[    0.100000] Primary data cache 32kB, 4-way, PIPT, no aliases, linesize 32 bytes
[    0.100000] MIPS secondary cache 256kB, 8-way, linesize 32 bytes.
[    0.128000] Synchronize counters for CPU 3: done.
[    0.132000] Brought up 4 CPUs
[    0.132000] NET: Registered protocol family 16
[    0.432000] release PCIe RST: RALINK_RSTCTRL = 7000000
[    0.432000] PCIE PHY initialize
[    0.432000] ***** Xtal 40MHz *****
[    0.432000] start MT7621 PCIe register access
[    1.020000] RALINK_RSTCTRL = 7000000
[    1.020000] RALINK_CLKCFG1 = 77ffeff8
[    1.020000] 
[    1.020000] *************** MT7621 PCIe RC mode *************
[    1.516000] PCIE2 no card, disable it(RST&CLK)
[    1.516000] pcie_link status = 0x3
[    1.516000] RALINK_RSTCTRL= 3000000
[    1.516000] *** Configure Device number setting of Virtual PCI-PCI bridge ***
[    1.516000] RALINK_PCI_PCICFG_ADDR = 21007f2 -> 21007f2
[    1.516000] PCIE0 enabled
[    1.516000] PCIE1 enabled
[    1.516000] interrupt enable status: 300000
[    1.516000] Port 1 N_FTS = 1b105000
[    1.516000] Port 0 N_FTS = 1b105000
[    1.516000] config reg done
[    1.516000] init_rt2880pci done
[    1.524000] FPU Affinity set after 4688 emulations
[    1.536000] bio: create slab <bio-0> at 0
[    1.536000] SCSI subsystem initialized
[    1.536000] gs_procfs_init------------------
[    1.536000] proc_create_data PN i 8fc3be68 0
[    1.536000] proc_create_data dev_alias i 8fc3be68 1
[    1.536000] proc_create_data dev_data i 8fc3be68 2
[    1.536000] proc_create_data dev_id i 8fc3be68 3
[    1.536000] proc_create_data dev_mac i 8fc3be68 4
[    1.536000] proc_create_data dev_rev i 8fc3be68 5
[    1.536000] proc_create_data required_bits i 8fc3be68 6
[    1.536000] proc_create_data model_key i 8fc3be68 7
[    1.536000] proc_create_data dev_prefix i 8fc3be68 8
[    1.536000] proc_create_data dev_region i 8fc3be68 9
[    1.536000] proc_create_data dev_country i 8fc3be68 10
[    1.536000] gs_procfs_init down------------------
[    1.536000] PCI host bridge to bus 0000:00
[    1.536000] pci_bus 0000:00: root bus resource [mem 0x60000000-0x6fffffff]
[    1.536000] pci_bus 0000:00: root bus resource [io  0x1e160000-0x1e16ffff]
[    1.536000] pci_bus 0000:00: No busn resource found for root bus, will use [bus 00-ff]
[    1.536000] pci 0000:00:00.0: [0e8d:0801] type 01 class 0x060400
[    1.536000] pci 0000:00:00.0: reg 10: [mem 0x00000000-0x7fffffff]
[    1.536000] pci 0000:00:00.0: reg 14: [mem 0x60200000-0x6020ffff]
[    1.536000] pci 0000:00:00.0: supports D1
[    1.536000] pci 0000:00:00.0: PME# supported from D0 D1 D3hot
[    1.536000] pci 0000:00:01.0: [0e8d:0801] type 01 class 0x060400
[    1.536000] pci 0000:00:01.0: reg 10: [mem 0x00000000-0x7fffffff]
[    1.536000] pci 0000:00:01.0: reg 14: [mem 0x60210000-0x6021ffff]
[    1.536000] pci 0000:00:01.0: supports D1
[    1.536000] pci 0000:00:01.0: PME# supported from D0 D1 D3hot
[    1.540000] pci 0000:01:00.0: [14c3:7615] type 00 class 0x000280
[    1.540000] pci 0000:01:00.0: reg 10: [mem 0x00000000-0x000fffff 64bit]
[    1.540000] pci_bus 0000:01: busn_res: [bus 01-ff] end is updated to 01
[    1.540000] pci 0000:02:00.0: [14c3:7615] type 00 class 0x000280
[    1.540000] pci 0000:02:00.0: reg 10: [mem 0x00000000-0x000fffff 64bit]
[    1.540000] pci_bus 0000:02: busn_res: [bus 02-ff] end is updated to 02
[    1.540000] pci_bus 0000:00: busn_res: [bus 00-ff] end is updated to 02
[    1.540000] pci 0000:00:00.0: BAR 0: can't assign mem (size 0x80000000)
[    1.540000] pci 0000:00:01.0: BAR 0: can't assign mem (size 0x80000000)
[    1.540000] pci 0000:00:00.0: BAR 8: assigned [mem 0x60000000-0x600fffff]
[    1.540000] pci 0000:00:01.0: BAR 8: assigned [mem 0x60100000-0x601fffff]
[    1.540000] pci 0000:00:00.0: BAR 1: assigned [mem 0x60200000-0x6020ffff]
[    1.540000] pci 0000:00:01.0: BAR 1: assigned [mem 0x60210000-0x6021ffff]
[    1.540000] pci 0000:01:00.0: BAR 0: assigned [mem 0x60000000-0x600fffff 64bit]
[    1.540000] pci 0000:00:00.0: PCI bridge to [bus 01]
[    1.540000] pci 0000:00:00.0:   bridge window [mem 0x60000000-0x600fffff]
[    1.540000] pci 0000:02:00.0: BAR 0: assigned [mem 0x60100000-0x601fffff 64bit]
[    1.540000] pci 0000:00:01.0: PCI bridge to [bus 02]
[    1.540000] pci 0000:00:01.0:   bridge window [mem 0x60100000-0x601fffff]
[    1.540000] BAR0 at slot 0 = 0
[    1.540000] bus=0x0, slot = 0x0
[    1.540000] res[0]->start = 0
[    1.540000] res[0]->end = 0
[    1.540000] res[1]->start = 60200000
[    1.540000] res[1]->end = 6020ffff
[    1.540000] res[2]->start = 0
[    1.540000] res[2]->end = 0
[    1.540000] res[3]->start = 0
[    1.540000] res[3]->end = 0
[    1.540000] res[4]->start = 0
[    1.540000] res[4]->end = 0
[    1.540000] res[5]->start = 0
[    1.540000] res[5]->end = 0
[    1.540000] BAR0 at slot 1 = 0
[    1.540000] bus=0x0, slot = 0x1
[    1.540000] res[0]->start = 0
[    1.540000] res[0]->end = 0
[    1.540000] res[1]->start = 60210000
[    1.540000] res[1]->end = 6021ffff
[    1.540000] res[2]->start = 0
[    1.540000] res[2]->end = 0
[    1.540000] res[3]->start = 0
[    1.540000] res[3]->end = 0
[    1.540000] res[4]->start = 0
[    1.540000] res[4]->end = 0
[    1.540000] res[5]->start = 0
[    1.540000] res[5]->end = 0
[    1.540000] bus=0x1, slot = 0x0, irq=0x4
[    1.540000] res[0]->start = 60000000
[    1.540000] res[0]->end = 600fffff
[    1.540000] res[1]->start = 0
[    1.540000] res[1]->end = 0
[    1.540000] res[2]->start = 0
[    1.540000] res[2]->end = 0
[    1.540000] res[3]->start = 0
[    1.540000] res[3]->end = 0
[    1.540000] res[4]->start = 0
[    1.540000] res[4]->end = 0
[    1.540000] res[5]->start = 0
[    1.540000] res[5]->end = 0
[    1.540000] bus=0x2, slot = 0x1, irq=0x18
[    1.540000] res[0]->start = 60100000
[    1.540000] res[0]->end = 601fffff
[    1.540000] res[1]->start = 0
[    1.540000] res[1]->end = 0
[    1.540000] res[2]->start = 0
[    1.540000] res[2]->end = 0
[    1.540000] res[3]->start = 0
[    1.540000] res[3]->end = 0
[    1.540000] res[4]->start = 0
[    1.540000] res[4]->end = 0
[    1.540000] res[5]->start = 0
[    1.540000] res[5]->end = 0
[    1.540000] Switching to clocksource MIPS
[    1.544000] NET: Registered protocol family 2
[    1.544000] TCP established hash table entries: 2048 (order: 2, 16384 bytes)
[    1.544000] TCP bind hash table entries: 2048 (order: 2, 16384 bytes)
[    1.544000] TCP: Hash tables configured (established 2048 bind 2048)
[    1.544000] TCP: reno registered
[    1.544000] UDP hash table entries: 256 (order: 1, 8192 bytes)
[    1.544000] UDP-Lite hash table entries: 256 (order: 1, 8192 bytes)
[    1.544000] NET: Registered protocol family 1
[    1.544000] PCI: CLS 80 bytes, default 32
[    1.632000] 4 CPUs re-calibrate udelay(lpj = 1167360)
[    1.636000] squashfs: version 4.0 (2009/01/31) Phillip Lougher
[    1.636000] jffs2: version 2.2. (NAND) (SUMMARY)  (LZMA) (RTIME) (CMODE_PRIORITY) (c) 2001-2006 Red Hat, Inc.
[    1.636000] msgmni has been set to 497
[    1.636000] io scheduler noop registered (default)
[    1.640000] reg_int_mask=0, INT_MASK= 0 
[    1.640000] HSDMA_init
[    1.640000] 
[    1.640000]  hsdma_phy_tx_ring0 = 0x00c00000, hsdma_tx_ring0 = 0xa0c00000
[    1.640000] 
[    1.640000]  hsdma_phy_rx_ring0 = 0x00c04000, hsdma_rx_ring0 = 0xa0c04000
[    1.640000] TX_CTX_IDX0 = 0
[    1.640000] TX_DTX_IDX0 = 0
[    1.640000] RX_CRX_IDX0 = 3ff
[    1.640000] RX_DRX_IDX0 = 0
[    1.640000] set_fe_HSDMA_glo_cfg
[    1.640000] HSDMA_GLO_CFG = 465
[    1.644000] Ralink gpio driver initialized
[    1.644000] Enable Ralink GDMA Controller Module 
[    1.644000] GDMA IP Version=3
[    1.648000] MediaTek Nand driver init, version v2.1 Fix AHB virt2phys error
[    1.648000] Allocate 16 byte aligned buffer: 814de670
[    1.648000] Enable NFI Clock
[    1.648000] # MTK NAND # : Use HW ECC
[    1.648000] NAND ID [9B F1 00 1D 9B, 00001d9b]
[    1.648000] Device found in MTK table, ID: 9bf1, EXT_ID: 1d9b
[    1.648000] Support this Device in MTK table! 9bf1 
[    1.648000] NAND device: Manufacturer ID: 0x9b, Chip ID: 0xf1 (Unknown NAND 128MiB 3,3V 8-bit), 128MiB, page size: 2048, OOB size: 64
[    1.648000] [NAND]select ecc bit:4, sparesize :64 spare_per_sector=16
[    1.648000] Scanning device for bad blocks
[    1.684000] Bad eraseblock 345 at 0x000002b20000
[    1.732000] Bad eraseblock 818 at 0x000006640000
[    1.756000] Signature matched and data read!
[    1.756000] load_fact_bbt success 1023
[    1.756000] 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 
[    1.756000] 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 
[    1.756000] 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 0c 00 00 00 00 00 00 00 00 00 
[    1.756000] 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 
[    1.756000] 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 
[    1.756000] 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 
[    1.756000] 00 00 00 00 00 00 00 00 00 00 00 00 30 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 
[    1.756000] 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 
[    1.756000] 8 cmdlinepart partitions found on MTD device MT7621-NAND
[    1.756000] gs_mtdparts.parts, alloc memory success
[    1.756000] Creating 8 MTD partitions on "MT7621-NAND":
[    1.756000] 0x000000000000-0x000000080000 : "uboot"
[    1.756000] 0x000000080000-0x0000000c0000 : "uboot-env"
[    1.760000] 0x0000000c0000-0x000000100000 : "art"
[    1.760000] 0x000000100000-0x000000140000 : "factory"
[    1.760000] 0x000000140000-0x000000180000 : "oops"
[    1.760000] 0x000000180000-0x000002180000 : "firmwareA"
[    1.764000] 0x000002180000-0x000004180000 : "firmwareB"
[    1.764000] 0x000004180000-0x000007f00000 : "remain"
[    1.764000] [mtk_nand] probe successfully!
[    1.764000] rootfs = 180000 to 7f00000
[    1.764000] Gluebi: Found kernel commandline option 'rootfsname=ubi0:ubi_rootfs'
[    1.764000] rdm_major = 253
[    1.764000] fact_para_get: read factory data from flash
[    1.800000] GMAC1_MAC_ADRH -- : 0x0000c074
[    1.800000] GMAC1_MAC_ADRL -- : 0xad1839d0
[    1.800000] Ralink APSoC Ethernet Driver Initilization. v3.1  1024 rx/tx descriptors allocated, mtu = 1500!
[    1.800000] eth0: Found an Ralink MT7621 embedded switch
[    1.804000] GMAC1_MAC_ADRH -- : 0x0000c074
[    1.804000] GMAC1_MAC_ADRL -- : 0xad1839d0
[    1.804000] PROC INIT OK!
[    1.804000] i2c /dev entries driver
[    1.804000] Ralink APSoC Hardware Watchdog Timer
[    1.804000] FACT_PARA: hw_get_hw_feature: Factory table header length = 48
[    1.804000] FACT_PARA: hw_get_hw_feature: Fact param table contains 5 attributes, with total len of 96
[    1.804000] FACT_PARA: hw_get_hw_feature: Adding feature:    3: len = 12
[    1.804000] FACT_PARA: hw_get_hw_feature: Adding feature: 1001: len = 10
[    1.804000] FACT_PARA: hw_get_hw_feature: Adding feature: 1002: len = 10
[    1.804000] FACT_PARA: hw_get_hw_feature: Adding feature: 1007: len = 28
[    1.804000] FACT_PARA: hw_get_hw_feature: Adding feature: 1025: len = 10
[    1.804000] HW_SECURITY_TABLE_VERSION 2 HW_SECURITY_TABLE_VERSION 1++++++++++++++++++++++++++++++++++++++++
[    1.804000] FACT_PARA: hw_get_hw_feature: HW_SECURITY_TABLE_VERSION
[    1.804000] FACT_PARA: hw_get_hw_feature: Security table contains 6 attributes, with total len of 3430
[    1.804000] FACT_PARA: hw_get_hw_feature: Adding feature:    7: len = 5
[    1.804000] FACT_PARA: hw_get_hw_feature: Adding feature:    2: len = 17
[    1.804000] FACT_PARA: hw_get_hw_feature: Adding feature:    3: len = 9
[    1.804000] FACT_PARA: hw_get_hw_feature: Adding feature:    1: len = 814
[    1.804000] FACT_PARA: hw_get_hw_feature: Adding feature:    0: len = 838
[    1.804000] FACT_PARA: hw_get_hw_feature: Adding feature:    8: len = 16
[    1.804000] DoneLED_RED: valid
[    1.804000] LED_GREEN: valid
[    1.804000] LED_BLUE: valid
[    1.804000] LED Pattern control for GWN7630LR (Ver 1.0, Compiled on May 14 2020, 17:16:30, running every 50ms)
[    1.804000] wifi_mempool_init
[    1.804000] TCP: cubic registered
[    1.804000] NET: Registered protocol family 10
[    1.808000] NET: Registered protocol family 17
[    1.808000] 8021q: 802.1Q VLAN Support v1.8
[    1.808000] UBI: attaching mtd6 to ubi0
[    2.100000] UBI: scanning is finished
[    2.112000] UBI warning: print_rsvd_warning: cannot reserve enough PEBs for bad PEB handling, reserved 18, need 19
[    2.112000] UBI: attached mtd6 (name "firmwareB", size 32 MiB) to ubi0
[    2.112000] UBI: PEB size: 131072 bytes (128 KiB), LEB size: 126976 bytes
[    2.112000] UBI: min./max. I/O unit sizes: 2048/2048, sub-page size 2048
[    2.112000] UBI: VID header offset: 2048 (aligned 2048), data offset: 4096
[    2.112000] UBI: good PEBs: 255, bad PEBs: 1, corrupted PEBs: 0
[    2.112000] UBI: user volume: 2, internal volumes: 1, max. volumes count: 128
[    2.112000] UBI: max/mean erase counter: 2/1, WL threshold: 4096, image sequence number: 737706666
[    2.112000] UBI: available PEBs: 0, total reserved PEBs: 255, PEBs reserved for bad PEB handling: 18
[    2.112000] UBI: background thread "ubi_bgt0d" started, PID 255
[    2.116000] Gluebi: mtd 'ubi_rootfs' on ubi '0' set to be root filesystem
[    2.116000] UBI: attaching mtd5 to ubi1
[    2.408000] UBI: scanning is finished
[    2.420000] UBI warning: print_rsvd_warning: cannot reserve enough PEBs for bad PEB handling, reserved 19, need 20
[    2.420000] UBI: attached mtd5 (name "firmwareA", size 32 MiB) to ubi1
[    2.420000] UBI: PEB size: 131072 bytes (128 KiB), LEB size: 126976 bytes
[    2.420000] UBI: min./max. I/O unit sizes: 2048/2048, sub-page size 2048
[    2.420000] UBI: VID header offset: 2048 (aligned 2048), data offset: 4096
[    2.420000] UBI: good PEBs: 256, bad PEBs: 0, corrupted PEBs: 0
[    2.420000] UBI: user volume: 2, internal volumes: 1, max. volumes count: 128
[    2.420000] UBI: max/mean erase counter: 2/1, WL threshold: 4096, image sequence number: 737706666
[    2.420000] UBI: available PEBs: 0, total reserved PEBs: 256, PEBs reserved for bad PEB handling: 19
[    2.420000] UBI: background thread "ubi_bgt1d" started, PID 271
[    2.424000] UBI: attaching mtd7 to ubi2
[    2.980000] UBI: scanning is finished
[    2.996000] UBI: attached mtd7 (name "remain", size 61 MiB) to ubi2
[    2.996000] UBI: PEB size: 131072 bytes (128 KiB), LEB size: 126976 bytes
[    2.996000] UBI: min./max. I/O unit sizes: 2048/2048, sub-page size 2048
[    2.996000] UBI: VID header offset: 2048 (aligned 2048), data offset: 4096
[    2.996000] UBI: good PEBs: 491, bad PEBs: 1, corrupted PEBs: 0
[    2.996000] UBI: user volume: 1, internal volumes: 1, max. volumes count: 128
[    2.996000] UBI: max/mean erase counter: 5/2, WL threshold: 4096, image sequence number: 418368777
[    2.996000] UBI: available PEBs: 0, total reserved PEBs: 491, PEBs reserved for bad PEB handling: 19
[    2.996000] UBI: background thread "ubi_bgt2d" started, PID 287
[    2.996000] input: gpio-keys as /devices/platform/gpio-keys/input/input0
[    3.000000] Warning: unable to open an initial console.
[    6.336000] VFS: Mounted root (squashfs filesystem) readonly on device 31:9.
[    6.340000] Freeing unused kernel memory: 244K (81473000 - 814b0000)
[    6.636000] init: Console is alive
[    6.636000] Started WatchDog Timer.
[    6.636000] init: - watchdog -
[    7.640000] init: - preinit -
[   10.824000] mount_root: mount_overlay (fstype is ubifs)
[   10.824000] UBIFS: background thread "ubifs_bgt2_0" started, PID 779
[   10.896000] UBIFS: recovery needed
[   11.312000] UBIFS: recovery completed
[   11.312000] UBIFS: mounted UBI device 2, volume 0, name "rootfs_data"
[   11.312000] UBIFS: LEB size: 126976 bytes (124 KiB), min./max. I/O unit sizes: 2048 bytes/2048 bytes
[   11.312000] UBIFS: FS size: 58155008 bytes (55 MiB, 458 LEBs), journal size 2920448 bytes (2 MiB, 23 LEBs)
[   11.312000] UBIFS: reserved for root: 2746804 bytes (2682 KiB)
[   11.312000] UBIFS: media format: w4/r0 (latest is w4/r0), UUID 560B4909-457F-4262-A276-F8052199222D, small LPT model
[   11.320000] mount_root: switching to flash overlay
[   11.476000] procd: - early -
[   11.476000] procd: - watchdog -
[   12.052000] procd: failed to set stdio
[   12.052000] procd: - ubus -
[   13.060000] procd: - init -
[   14.432000] rsa_verify: RSA signature OK
[   14.456000] Button Hotplug driver version 0.4.1
[   14.460000] rsa_verify: RSA signature OK
[   14.484000] major number 248.
[   14.488000] rsa_verify: RSA signature OK
[   15.564000] rsa_verify: RSA signature OK
[   15.564000] mt_wifi: module license 'Proprietary' taints kernel.
[   15.564000] Disabling lock debugging due to kernel taint
[   15.664000] register mt_drv
[   15.676000] 
[   15.676000] 
[   15.676000] === pAd = c0c81000, size = 3728200 ===
[   15.676000] 
[   15.676000] <-- RTMPAllocAdapterBlock, Status=0
[   15.676000] pAd->PciHif.CSRBaseAddress =0xc0b80000, csr_addr=0xc0b80000!
[   15.676000] RTMPInitPCIeDevice():device_id=0x7615
[   15.676000] DriverOwn()::Try to Clear FW Own...
[   15.976000] DriverOwn()::Success to clear FW Own
[   15.976000] mt_pci_chip_cfg(): HWVer=0x8a10, FWVer=0x8a10, pAd->ChipID=0x7615
[   15.976000] mt_pci_chip_cfg(): HIF_SYS_REV=0x76150001
[   15.976000] RtmpChipOpsHook(492): Not support for HIF_MT yet! MACVersion=0x0
[   15.976000] mt7615_init()-->
[   15.976000] Use 1st ePAeLNA default bin.
[   15.976000] Use 0st /etc/wlan/MT7615E_EEPROM1.bin default bin.
[   15.976000] <--mt7615_init()
[   15.976000] ChipOpsMCUHook
[   15.980000] cut_through_token_list_init(): TokenList inited done!id_head/tail=0/4096
[   15.980000] cut_through_token_list_init(): 8cb6d608,8cb6d608
[   15.984000] cut_through_token_list_init(): TokenList inited done!id_head/tail=0/4096
[   15.984000] cut_through_token_list_init(): 8cb6d618,8cb6d618
[   15.984000] <-- RTMPAllocTxRxRingMemory, Status=0
[   15.996000] 
[   15.996000] 
[   15.996000] === pAd = c1181000, size = 3728200 ===
[   15.996000] 
[   16.000000] <-- RTMPAllocAdapterBlock, Status=0
[   16.000000] pAd->PciHif.CSRBaseAddress =0xc1080000, csr_addr=0xc1080000!
[   16.000000] RTMPInitPCIeDevice():device_id=0x7615
[   16.000000] DriverOwn()::Try to Clear FW Own...
[   16.304000] DriverOwn()::Success to clear FW Own
[   16.304000] mt_pci_chip_cfg(): HWVer=0x8a10, FWVer=0x8a10, pAd->ChipID=0x7615
[   16.304000] mt_pci_chip_cfg(): HIF_SYS_REV=0x76150001
[   16.304000] RtmpChipOpsHook(492): Not support for HIF_MT yet! MACVersion=0x0
[   16.304000] mt7615_init()-->
[   16.304000] Use 2nd ePAeLNA default bin.
[   16.304000] Use 1st /etc/wlan/MT7615E_EEPROM2.bin default bin.
[   16.304000] <--mt7615_init()
[   16.304000] ChipOpsMCUHook
[   16.308000] cut_through_token_list_init(): TokenList inited done!id_head/tail=0/4096
[   16.308000] cut_through_token_list_init(): 8c6e8588,8c6e8588
[   16.312000] cut_through_token_list_init(): TokenList inited done!id_head/tail=0/4096
[   16.312000] cut_through_token_list_init(): 8c6e8598,8c6e8598
[   16.312000] <-- RTMPAllocTxRxRingMemory, Status=0
[   16.348000] rsa_verify: RSA signature OK
[   16.376000] rsa_verify: RSA signature OK
[   16.404000] rsa_verify: RSA signature OK
[   16.432000] rsa_verify: RSA signature OK
[   16.456000] ip6_tables: (C) 2000-2006 Netfilter Core Team
[   16.460000] rsa_verify: RSA signature OK
[   16.484000] rsa_verify: RSA signature OK
[   16.512000] rsa_verify: RSA signature OK
[   16.540000] rsa_verify: RSA signature OK
[   16.568000] rsa_verify: RSA signature OK
[   16.592000] rsa_verify: RSA signature OK
[   16.620000] rsa_verify: RSA signature OK
[   16.648000] rsa_verify: RSA signature OK
[   16.676000] rsa_verify: RSA signature OK
[   16.704000] rsa_verify: RSA signature OK
[   16.728000] rsa_verify: RSA signature OK
[   16.752000] u32 classifier
[   16.752000]     input device check on
[   16.752000]     Actions configured
[   16.756000] rsa_verify: RSA signature OK
[   16.784000] rsa_verify: RSA signature OK
[   16.804000] Mirror/redirect action on
[   16.812000] rsa_verify: RSA signature OK
[   16.836000] rsa_verify: RSA signature OK
[   16.860000] Failed to load ipt action
[   16.864000] rsa_verify: RSA signature OK
[   16.892000] rsa_verify: RSA signature OK
[   16.920000] rsa_verify: RSA signature OK
[   16.944000] rsa_verify: RSA signature OK
[   16.972000] rsa_verify: RSA signature OK
[   17.000000] rsa_verify: RSA signature OK
[   17.024000] rsa_verify: RSA signature OK
[   17.052000] rsa_verify: RSA signature OK
[   17.080000] rsa_verify: RSA signature OK
[   17.108000] rsa_verify: RSA signature OK
[   17.136000] rsa_verify: RSA signature OK
[   17.160000] rsa_verify: RSA signature OK
[   17.188000] rsa_verify: RSA signature OK
[   17.216000] rsa_verify: RSA signature OK
[   17.244000] rsa_verify: RSA signature OK
[   17.276000] rsa_verify: RSA signature OK
[   17.300000] major number 246.
[   17.304000] rsa_verify: RSA signature OK
[   17.328000] ip_tables: (C) 2000-2006 Netfilter Core Team
[   17.328000] Type=Restricted Cone
[   17.336000] rsa_verify: RSA signature OK
[   17.364000] nf_conntrack version 0.5.0 (3980 buckets, 15920 max)
[   17.368000] rsa_verify: RSA signature OK
[   17.396000] rsa_verify: RSA signature OK
[   17.432000] rsa_verify: RSA signature OK
[   17.460000] openvswitch: Open vSwitch switching datapath 2.5.2
[   17.460000] openvswitch: LISP tunneling driver
[   17.460000] openvswitch: GRE over IPv4 tunneling driver
[   17.460000] openvswitch: Geneve tunneling driver
[   17.460000] openvswitch: VxLAN tunneling driver
[   17.460000] openvswitch: STT tunneling driver
[   17.460000] netlink: Failed to set connlabel length
[   17.464000] rsa_verify: RSA signature OK
[   17.492000] rsa_verify: RSA signature OK
[   17.524000] rsa_verify: RSA signature OK
[   17.552000] rsa_verify: RSA signature OK
[   17.580000] rsa_verify: RSA signature OK
[   17.608000] rsa_verify: RSA signature OK
[   17.636000] rsa_verify: RSA signature OK
[   17.660000] rsa_verify: RSA signature OK
[   17.688000] rsa_verify: RSA signature OK
[   17.716000] rsa_verify: RSA signature OK
[   17.744000] rsa_verify: RSA signature OK
[   17.772000] rsa_verify: RSA signature OK
[   17.800000] rsa_verify: RSA signature OK
[   17.828000] rsa_verify: RSA signature OK
[   17.852000] rsa_verify: RSA signature OK
[   17.880000] rsa_verify: RSA signature OK
[   17.908000] rsa_verify: RSA signature OK
[   17.936000] rsa_verify: RSA signature OK
[   17.960000] rsa_verify: RSA signature OK
[   17.988000] rsa_verify: RSA signature OK
[   18.016000] rsa_verify: RSA signature OK
[   18.044000] rsa_verify: RSA signature OK
[   18.068000] rsa_verify: RSA signature OK
[   18.096000] rsa_verify: RSA signature OK
[   18.124000] rsa_verify: RSA signature OK
[   18.152000] rsa_verify: RSA signature OK
[   18.176000] rsa_verify: RSA signature OK
[   18.204000] rsa_verify: RSA signature OK
[   18.232000] rsa_verify: RSA signature OK
[   18.260000] rsa_verify: RSA signature OK
[   18.284000] rsa_verify: RSA signature OK
[   18.308000] xt_time: kernel timezone is -0000
[   18.312000] rsa_verify: RSA signature OK
[   18.340000] rsa_verify: RSA signature OK
[   18.368000] rsa_verify: RSA signature OK
[   18.392000] PPP generic driver version 2.4.2
[   18.396000] rsa_verify: RSA signature OK
[   18.420000] NET: Registered protocol family 24
[   18.424000] rsa_verify: RSA signature OK
[   18.452000] rsa_verify: RSA signature OK
[   29.324000] device ovs-system entered promiscuous mode
[   29.324000] ovs_vport_add: vport name=ovs-system, mesh_backhaul_name=
[   29.396000] device br-lan0_zone0 entered promiscuous mode
[   29.516000] 12:FFFFFF81:FFFFFFA0:FFFFFFE3:FFFFFF90:FFFFFF8F
[   29.396000] ovs_vport_add: vport name=br-lan0_zone0, mesh_backhaul_name=
[   29.516000] Raeth v3.1 (Tasklet)
[   29.520000] set CLK_CFG_0 = 0x40a00020!!!!!!!!!!!!!!!!!!1
[   29.528000] phy_free_head is 0xca8000!!!
[   29.528000] phy_free_tail_phy is 0xca9ff0!!!
[   29.528000] txd_pool=a0cb0000 phy_txd_pool=00CB0000
[   29.528000] ei_local->skb_free start address is 0x8fec26cc.
[   29.528000] free_txd: 00cb0010, ei_local->cpu_ptr: 00CB0000
[   29.528000]  POOL  HEAD_PTR | DMA_PTR | CPU_PTR 
[   29.528000] ----------------+---------+--------
[   29.528000]      0xa0cb0000 0x00CB0000 0x00CB0000
[   29.528000] 
[   29.528000] phy_qrx_ring = 0x00caa000, qrx_ring = 0xa0caa000
[   29.528000] 
[   29.528000] phy_rx_ring0 = 0x00cac000, rx_ring[0] = 0xa0cac000
[   29.556000] MT7530 Reset Completed!!
[   29.564000] change HW-TRAP to 0x17c8f
[   29.568000] set LAN/WAN LLLLW
[   29.572000] GMAC1_MAC_ADRH -- : 0x0000c074
[   29.572000] GMAC1_MAC_ADRL -- : 0xad1839d0
[   29.572000] GDMA2_MAC_ADRH -- : 0x0000000c
[   29.572000] GDMA2_MAC_ADRL -- : 0x432880cd
[   29.576000] eth1: ===> VirtualIF_open
[   29.576000] MT7621 GE2 link rate to 1G
[   29.576000] CDMA_CSG_CFG = 81000000
[   29.576000] GDMA1_FWD_CFG = 20710000
[   29.576000] GDMA2_FWD_CFG = 20710000
[   29.576000] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
[   29.692000] device eth0 entered promiscuous mode
[   29.964000] gs_ovs_get_vlan: dev->name=eth0
[   29.964000] set ifname eth0 vlan mode=0, vlanid=0
[   30.316000] gs_ovs_get_vlan: dev->name=eth0
[   30.316000] set ifname eth0 vlan mode=0, vlanid=0
[   30.500000] RtmpOSNetDevDetach(): RtmpOSNetDeviceDetach(), dev->name=ath1!
[   30.640000] cut_through_token_list_destroy(): 8c6e8588,8c6e8588
[   30.640000] cut_through_token_list_destroy(): 8c6e8598,8c6e8598
[   30.648000] RtmpOSNetDevDetach(): RtmpOSNetDeviceDetach(), dev->name=ath0!
[   30.728000] cut_through_token_list_destroy(): 8cb6d608,8cb6d608
[   30.728000] cut_through_token_list_destroy(): 8cb6d618,8cb6d618
[   30.740000] Unregister PCI device driver
[   32.500000] ESW: Link Status Changed - Port2 Link UP
[   32.500000] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
[   35.772000] dnsanalysis: kernel receive usr id=1, pid=3027
[   35.772000] rsa_verify: RSA signature OK
[   35.892000] register mt_drv
[   35.904000] 
[   35.904000] 
[   35.904000] === pAd = c2201000, size = 3728200 ===
[   35.904000] 
[   35.904000] <-- RTMPAllocAdapterBlock, Status=0
[   35.904000] pAd->PciHif.CSRBaseAddress =0xc2100000, csr_addr=0xc2100000!
[   35.904000] RTMPInitPCIeDevice():device_id=0x7615
[   35.904000] DriverOwn()::Try to Clear FW Own...
[   36.108000] dnsanalysis: kernel receive controller_enable = 0
[   36.284000] DriverOwn()::Success to clear FW Own
[   36.284000] mt_pci_chip_cfg(): HWVer=0x8a10, FWVer=0x8a10, pAd->ChipID=0x7615
[   36.284000] mt_pci_chip_cfg(): HIF_SYS_REV=0x76150001
[   36.284000] RtmpChipOpsHook(492): Not support for HIF_MT yet! MACVersion=0x0
[   36.284000] mt7615_init()-->
[   36.284000] Use 1st ePAeLNA default bin.
[   36.284000] Use 0st /etc/wlan/MT7615E_EEPROM1.bin default bin.
[   36.284000] <--mt7615_init()

hello did we know the specs for the GWN7600?
it is 2x2 mu-mimo with 450+ clients support.
is the cpu and the other specs more powerful ?