Hi sorry if this is repeat information but I've been unable to find the answer.
I have 3 x NLS-1304-25 AP's currently with stock code (1 is the router and the other two are part of the mesh). Due to the shortcomings of the router side, I'd like to set them to bridge only and use my Mikrotik router for everything else but thats not possible with the current google code as it doesn't support mesh when in bridge mode.
What I was hoping to achieve was multiple ssid's (main, guest, IoT) and map these to specific vlan's off the mikrotik as well as use mesh/802.11s for the two AP's that are not hardwired into the mikrotik.
The below link has a question mark on vlans, so wasn't sure. I have a spare NLS-1304-25 that I can flash and test on but wanted to double check before doing so.