Hello everyone, I have a Gl-AR300M16 and tried to install the latest openwrt version with debrick. Unfortunately I think I destroyed the Ar300m16. I can always open the debrick page via the static IP 192.168.1.1, but no matter which .bin file I upload, the AR300M16 first flashes green and then always red and I can no longer access the device via the IP 192.168.8.1 without a static IP . What can I do now ?
Did you try following the directions in the device info page:
It describes using u-boot to perform the installation. There is also a link to the GL-Inet page for debricking.
thanks for the help, im now in the luci safemode, but i dont find the right img file to update openwrt. if i update it with the file glinet_gl-ar300m-nand-squashfs-factory.img there is a error and i dont find the img with nor
Maybe use the actual gl-inet firmware just to get back to a running state again. Then you should be able to move to the official openwrt firmware.