Cylac
March 27, 2018, 6:31pm
853
Wow! this thread is pretty long now!
How can I tell with version of r00t's firmware I'm running?
My status page shows "LEDE Reboot SNAPSHOT r5464-5a8e9846af / LuCI Master (git-17.342.53118-6d086bf)"
Also, is r00t planning on release future releases? I couldn't tell by browsing through this thread!
thanks
I'm using my Archer C7 v2 as AP (not as router), the only way to improve performance in Wifi/LAN is overclocking via breed u-boot. Checked by myself.
After overclocking from 720 Mhz. to 1 Ghz. I've improved my connections about a 30% (the difference between 720 and 1000, about a 30% in Mhz.)
It's supposed NAT will improve as well after overcloking, but as I told before, I'm not using it.
Thanks,
i think most people are using his config file and patches etc now and building there own images mostly, or just keeping his as there stable version. Who knows....
where did you notice the change in performance does your kernel log still say 720?
Yes, I noticed about 30% more in performance (checked with netperf util).
Thats what my kernel log shows:
[0.000000] Clocks: CPU:1000.000MHz, DDR:760.000MHz, AHB:380.000MHz, Ref:40.000MHz
[0.000000] clocksource: MIPS: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 3822520893 ns
[0.000005] sched_clock: 32 bits at 500MHz, resolution 2ns, wraps every 4294967295ns
[0.008512] Calibrating delay loop... 498.89 BogoMIPS (lpj=2494464)
Wright now, I'm not using @r00t firmware, I'm using latest LEDE snapshot.
is this the method you used to overclock it, from this thread?
I see people that bricked them in the process of overclocking, after flashing breed u-boot...
Yes.
In my case, I had no problems. Working like a charm.
idk why mine isnt overclocking then, strange...i mean breed is there and keeps the settings, just the kernel isnt accepting them or something. Interesting.
Updated today, and still working:
[ 0.000000] Linux version 4.9.91 (buildbot@builds) (gcc version 7.3.0 (OpenWrt GCC 7.3.0 r6510-0f1a148) ) #0 Sat Mar 31 17:31:42 2018
[ 0.000000] MyLoader: sysp=00601021, boardp=00501023, parts=00000000
[ 0.000000] bootconsole [early0] enabled
[ 0.000000] CPU0 revision is: 00019750 (MIPS 74Kc)
[ 0.000000] Clocks: CPU:1000.000MHz, DDR:760.000MHz, AHB:380.000MHz, Ref:40.000MHz
[ 0.000000] clocksource: MIPS: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 3822520893 ns
[ 0.000005] sched_clock: 32 bits at 500MHz, resolution 2ns, wraps every 4294967295ns
[ 0.008511] Calibrating delay loop... 498.89 BogoMIPS (lpj=2494464)
Maybe I’ll try reflashing
can you show all your kernel modules? maybe theres something im missing in my build.
Here comes,
root@AP:~# opkg list-installed | grep -i kmod
kmod-ath - 4.9.91+2017-11-01-4
kmod-ath10k - 4.9.91+2017-11-01-4
kmod-ath9k - 4.9.91+2017-11-01-4
kmod-ath9k-common - 4.9.91+2017-11-01-4
kmod-cfg80211 - 4.9.91+2017-11-01-4
kmod-gpio-button-hotplug - 4.9.91-2
kmod-ip6tables - 4.9.91-1
kmod-ipt-conntrack - 4.9.91-1
kmod-ipt-core - 4.9.91-1
kmod-ipt-nat - 4.9.91-1
kmod-lib-crc-ccitt - 4.9.91-1
kmod-mac80211 - 4.9.91+2017-11-01-4
kmod-nf-conntrack - 4.9.91-1
kmod-nf-conntrack6 - 4.9.91-1
kmod-nf-ipt - 4.9.91-1
kmod-nf-ipt6 - 4.9.91-1
kmod-nf-nat - 4.9.91-1
kmod-nf-reject - 4.9.91-1
kmod-nf-reject6 - 4.9.91-1
kmod-nls-base - 4.9.91-1
kmod-ppp - 4.9.91-1
kmod-pppoe - 4.9.91-1
kmod-pppox - 4.9.91-1
kmod-slhc - 4.9.91-1
kmod-usb-core - 4.9.91-1
kmod-usb-ehci - 4.9.91-1
kmod-usb-ledtrig-usbport - 4.9.91-1
kmod-usb2 - 4.9.91-1
root@AP:~#
braza
April 4, 2018, 6:47pm
865
Hello .
I have a problem and would like to know what happens.
I have a ./fslb file that works perfectly on ar71xx AC 1750 with Latest Chaos Calmer Release - OpenWrt 15.05.1
But now I've upgraded the router to LEDE with gcc 7.3 and the file does not work.
Error
Without chmod I do not have permission.
With chmod + x fslb or chmod 777 fslb there is no error, however ./fslb not found.
./fslb not found
with cmd ls o fslb is in the directory.
What happened ?
tmomas
April 4, 2018, 10:08pm
866
Have you upgraded to this specific community release or to an official release available on downloads.openwrt.org ?
i fixed it, after making my frequency setting changes, rather than pressing restart i just unplugged the router and it booted normally!!
have you seen any real world improvement after overclocking to 1000 mhz in comparison to the old value?
you know ever since i added a few things to my build, i was getting better performance as it was, but now that i have the overclock engaged im getting another 10-20% better on download. i was only getting 115 mbps download tops to start with on this router, now since my firmware and the breed overclocking my download is 135 mbps.
Yes, about a 30% in performance.
phinn
April 6, 2018, 3:57pm
871
What's your max download? 135Mbps max is terrible for this router. It should be capable of 800Mbps-1Gbps with no need to overclock if you look at a review like this:
https://www.smallnetbuilder.com/wireless/wireless-reviews/32498-tp-link-archer-c7-v2-reviewed
You can view some benchmarks here:
I have successfully ported Qualcomm OpenSourced Fast Path for LEDEN
Fast Path will work on ALL hardware
You don't need to configure any additional settings for Fast Path as long as modules are loaded successfully it will work
From my testing Fast Path improves Wireless and Wired Throughput
On my WDR4300v1 running at 730MHZ I can achieve Wire Speeds
https://wiki.openwrt.org/doc/howto/benchmark.nat
Client connecting to 10.1.1.2, TCP port 5001
TCP window size: 0.08 MByte (default)
[ 3] loc…