Further advice on updating Zyxel GS1900-8HP v2 to Openwrt 24.10.0

[skyleak]

OpenWrt 24.10.0 - First Stable Release

@Hersfeld My procedure works! The problem was the restored config. There is something in it that makes the sysupgrade think it is an old image. I did not go through the trouble finding out what it is since my config is so simple. I just performed a reset and configured by hand again! Yes, you do: backup your settings (just in case you wanna go back to 23.05.5) Use the sysupgrade upload in luci and upload the factory image and force the install (dont keep settings!) After the r…