Full Flash Dump .bin for Archer C20 V5 / V4 or C50 to Debrick

Installing and Using OpenWrt
#1

Olá Pessoal,
Estou precisando de um backup da flash Winbond 25064fvsig de um TP-Link Archer C20 v5, pois ao tentar subir o firmware da OpenWrt, acabei matando o roteador de forma que não é possível consertar via TFTP nem via Serial rx tx, aparentemente o bootloader foi corrompido. As versões dumpeadas V4 do C20 ou C50 também são bem vindas caso alguém tenha. Obrigado!

Hi Folks,
I'm looking for a backup of the Winbond 25064fvsig flash from a TP-Link Archer C20 v5, because when trying to upload the OpenWrt firmware, I bricked the router in a way that, it is not possible bring to life it by TFTP or Serial rx tx, the bootloader has apparently corrupted. The dump from V4 versions of the C20 or C50 are also welcome if anyone has one. Thank you!

#2

i Found a motherboard dump for w25q64. i will share the backups for Archer C20 V4 and C50 V4.
Russians fw:
Dump_c20v4_25q64
Dump_c50v4
i burned this c20v4 on my V5 hardware and WORKS! after that, i uploaded by tftp the v4 http://downloads.openwrt.org/releases/19.07.4/targets/ramips/mt76x8/openwrt-19.07.4-ramips-mt76x8-tplink_c20-v4-squashfs-tftp-recovery.bin setting my pc to 192.169.0.66 and powering up moden with reset pushed till led blink fast. After all i waited 2 minutes and BINGO, I get a openwrt V4 firm in a V5 c20 hardware Workin!! With a MT7610EN 5ghz workin flawless.

#4

full flash for v5