Good Day!
First of all thank you very much for this great project.
I'm fairly new here, please consider that I'm doing something completely wrong, im sorry in advance.
If im using my fritzbox 7412 with stock firmware at my location i get something about 50/10 Through DSL, which I have booked.
If im using fritzbox 3370 with openwrt, I land at:
Hostname OpenWrt
Model AVM FRITZ!Box 3370 Rev. 2 (Micron NAND)
Architecture xRX200 rev 1.2
Target Platform lantiq/xrx200
Firmware Version OpenWrt 22.03.0-rc2 r19374-34b6abf5a8 / LuCI openwrt-22.03 branch git-22.140.66268-ef99568
Line State: Showtime with TC-Layer sync
Line Mode: G.993.2 (VDSL2, Profile 17a)
Line Uptime: 0h 1m 16s
Annex: B
Data Rate: 12.501 Mb/s / 1.561 Mb/s
Max. Attainable Data Rate (ATTNDR): 13.298 Mb/s / 1.592 Mb/s
Latency: 0.25 ms / 0.00 ms
Line Attenuation (LATN): 10.5 dB / 3.5 dB
Signal Attenuation (SATN): 10.5 dB / 3.5 dB
Noise Margin (SNR): 7.3 dB / 9.2 dB
Aggregate Transmit Power (ACTATP): 14.5 dB / -4.6 dB
Forward Error Correction Seconds (FECS): 0 / 2186
Errored seconds (ES): 202 / 5584
Severely Errored Seconds (SES): 43 / 2143
Loss of Signal Seconds (LOSS): 21 / 0
Unavailable Seconds (UAS): 7114 / 7114
Header Error Code Errors (HEC): 0 / 0
Non Pre-emptive CRC errors (CRC_P): 0 / 0
Pre-emptive CRC errors (CRCP_P): 0 / 0
ATU-C System Vendor ID: Broadcom 193.214
Power Management Mode: L0 - Synchronized
Is there something visible thats wrongly set up?
Im thinking about just using the 3370 behind the 7412, if I cant fix it.
I tried openwrt 21.stable, several DSL firmware blobs, ranging from no connection at all to same results.
Any direction what might be wrong?
Thank you very much!