Thanks mate!
I was too late, the file is already gone from anonfiles.com and I too cannot make baidu work for me, they are not letting anyone outside of china make accounts any chance you can put it up again?
Would it be possible to link to a binary again please?
I have tried downloading and building from the github at tonynii/openwrt but i was getting build errors that I couldn't work out. So then I downloaded the main sources from the openwrt/openwrt github, and manually made the changes (that I could find) from the tonynii repository. I think I may have missed something though - I have successfully uploaded the firmware, but the 5GHz network doesn't seem to be detected. I am getting the following errors in dmesg, and have no idea how to fix it.
dmesg | grep wifi
[ 14.284225] ath10k_ahb a000000.wifi: qca4019 hw1.0 target 0x01000000 chip_id 0x003b00ff sub 0000:0000
[ 14.284272] ath10k_ahb a000000.wifi: kconfig debug 0 debugfs 1 tracing 0 dfs 1 testmode 0
[ 14.295788] ath10k_ahb a000000.wifi: firmware ver 10.4b-ct-4019-fW-13-5ae337bb1 api 5 features mfp,peer-flow-ctrl,txstatus-noack,wmi-10.x-CT,ratemask-CT,regdump-CT,txrate-CT,flush-all-CT,pingpong-CT,ch-regs-CT,nop-CT,set-special-CT,tx-rc-CT,cust-stats-CT,txrate2-CT,beacon-cb-CT,wmi-block-ack-CT,wmi-bcn-rc-CT crc32 6b2b5c5b
[ 14.387073] ath10k_ahb a000000.wifi: board_file api 2 bmi_id 0:16 crc32 e2dfaa91
[ 15.675235] ath10k_ahb a000000.wifi: 10.4 wmi init: vdevs: 16 peers: 48 tid: 96
[ 15.675288] ath10k_ahb a000000.wifi: msdu-desc: 2500 skid: 32
[ 15.710894] ath10k_ahb a000000.wifi: wmi print 'P 48/48 V 16 K 144 PH 176 T 186 msdu-desc: 2500 sw-crypt: 0 ct-sta: 0'
[ 15.711900] ath10k_ahb a000000.wifi: wmi print 'free: 53252 iram: 13432 sram: 35752'
[ 15.844807] ath10k_ahb a000000.wifi: htt-ver 2.2 wmi-op 6 htt-op 4 cal pre-cal-file max-sta 32 raw 0 hwcrypto 1
[ 17.017370] ath10k_ahb a800000.wifi: qca4019 hw1.0 target 0x01000000 chip_id 0x003b00ff sub 0000:0000
[ 17.017417] ath10k_ahb a800000.wifi: kconfig debug 0 debugfs 1 tracing 0 dfs 1 testmode 0
[ 17.030288] ath10k_ahb a800000.wifi: firmware ver 10.4b-ct-4019-fW-13-5ae337bb1 api 5 features mfp,peer-flow-ctrl,txstatus-noack,wmi-10.x-CT,ratemask-CT,regdump-CT,txrate-CT,flush-all-CT,pingpong-CT,ch-regs-CT,nop-CT,set-special-CT,tx-rc-CT,cust-stats-CT,txrate2-CT,beacon-cb-CT,wmi-block-ack-CT,wmi-bcn-rc-CT crc32 6b2b5c5b
[ 17.057750] ath10k_ahb a800000.wifi: failed to fetch board data for bus=ahb,vendor=0000,device=0000,subsystem-vendor=0000,subsystem-device=0000,variant=Netgear-EX6200v from ath10k/QCA4019/hw1.0/board-2.bin
[ 17.121243] ath10k_ahb a800000.wifi: failed to fetch board-2.bin or board.bin from ath10k/QCA4019/hw1.0
[ 17.121295] ath10k_ahb a800000.wifi: failed to fetch board file: -12
[ 17.129543] ath10k_ahb a800000.wifi: could not probe fw (-12)
[ 25.207376] ath10k_ahb a000000.wifi: 10.4 wmi init: vdevs: 16 peers: 48 tid: 96
[ 25.207427] ath10k_ahb a000000.wifi: msdu-desc: 2500 skid: 32
[ 25.243709] ath10k_ahb a000000.wifi: wmi print 'P 48/48 V 16 K 144 PH 176 T 186 msdu-desc: 2500 sw-crypt: 0 ct-sta: 0'
[ 25.247050] ath10k_ahb a000000.wifi: wmi print 'free: 53252 iram: 13432 sram: 35752'
[ 25.534199] ath10k_ahb a000000.wifi: rts threshold -1
[ 25.538058] ath10k_ahb a000000.wifi: Firmware lacks feature flag indicating a retry limit of > 2 is OK, requested limit: 4
[ 26.181585] ath10k_ahb a000000.wifi: NOTE: Firmware DBGLOG output disabled in debug_mask: 0x10000000