Firmware for WS-WN536AX3 RevA

Installing and Using OpenWrt
1

Hello Together,
I am Using the same Hardware with sae processor ( Reference: AX3000 WiFi 6 Router mesh) Processor Model:Processor Dual-Core CPU Chipset MT7981B+MT7976C+MT7531AE Flash 128MB (1024Mb) DDR3 256MB (2Gb)

I have tried to update open wrt firmware for the same hardware which is released for routerich router AX3000 (Link: https://openwrt.org/toh/routerich/ax3000)

But it does not boot as expected. Kindly help if anyone knows the right firmware about it.
Please share the link if you know about the firmware for the same.

Other details about the router:

Model: WS-WN536AX3 RevA
4 Antenna, 4 LAN port, 1 WAN port, 1 reset button, 1 ON /OFF button

Thanks in Advance

2

That is not an issue with the firmware selector, please open a new thread for that.

Apart from the off-topic'ness, keep in mind that these are embedded devices that simply aren't generic. Same SOC+wireless does not imply same bootloader environment, same GPIOs, same muxing, same offsets for wireless calibration data or 'just' same flash partitioning, you can't expect the image for another device to 'just work', on the contrary, the results are likely fatal - and likely even permanently so. If you have a new -previously unsupported- device, you will have to do the investigation what the OEM firmware is doing to get it working and do the necessary development, no one else has the same device on their desk, no one else can.

1 Like