Hello, Router Xiaomi XA3200 running under OpenWrt 22.03.5 Router is connected directly to my ISP where I obtained a public adresses from WAN side. From LAN side I have some Raspberry, Webcam, NAS, ... configured using IP fix address. I finally successfully configured WAN side remote access for: …

[image] cedbouc: and I should be able see it as open using CanYouSeeMe.org . Isn't it ? Not necessarily - are the ports UDP or TCP?

Good idea. I will try it, to be fair I even do not think about that; thanks for this proposal. I planned to configured the router as I did by the past for my ISP router as NAT was the only solution available. I just see a tuto for wiregard which seems easy enough to install.

[image] cedbouc: I will try it, to be fair I even do not think about that; thanks for this proposal. Something else more simple and secure. You can use a key-based login for SSH and disable passwords. Your client would then need a SSH app that allows you to setup [TCP] tunnels to the destinat…

Looks like it's time to use 'tcpdump' and see those packets...

[image] eduperez: Many deices will not accept external connections (from outside the network where they are connected), perhaps this is your case. Try to create a SNAT rule, to masquerade those connections as if coming from the router. If you have not done so I would certainly take this advic…

I installed Wireguard on my router, generated new keys, created the wg0 new interface, open fw UDP port, attached the new wg0 to my lan interface, created a new peer. Then I tried to connect through the wireguard VPN android client using my cellphone. But nothing really append... I do not see real…

I already installed by the past tcpdump-mini. But log are availbale on the Luci System Log only ? Are there some verbose mode for firewall or WAN interface or Wireguard ? In order to at least check if request is coming from the VPN client ?

I recommend tcpdump not tcpdump-mini Are there some verbose mode for firewall or WAN interface or Wireguard ? wireguard: wg show firewall (depen add rule log to port wireguard) wan example: [image] Tcpdump Examples - 22 Tactical Commands | HackerTarget.com In these tcpdump examples…

I try this: [image] Four Ways to View WireGuard Logs How to enable and view WireGuard logging. [image] But not a lot of thing append. regarding wg show it returns my public and private keeys and the listening port. Nothing else. I will try from another c…

Firewall - Port forwarding

Installing and Using OpenWrt

ncompact August 17, 2023, 9:36pm 23

correct

duplicate to: