Filehub – 009 config - 5g issues

My primary goal is to use the filehub a tailscale subnet router.

Is there a way to test the hardware within openwrt? Is there a way to force both radios on by default?

From what I understand the 5G cannot be bridged.
But I’m trying to figure out how to make a guest Netwerk Wi-Fi for the 5G with the 2g radio as a dummy ap.
The problem is the radio is either defective or I am simply not setting it up correctly.

Can anyone share me there config for the file hub 009?

If nothing else I am going to try the wireless bridge (from the eth0 wan) and make this the only means of utilizing the filehub.
I’ve tried travelmate but I can not get the 5g to work as an access point if the 2g is connected to wifi as a client. Is this normal?

Maybe we can start with your existing config to see how you've got it setup...

Please copy the output of the following commands and post it here using the "Preformatted text </> " button:
Remember to redact passwords, MAC addresses and any public IP addresses you may have:

cat /etc/config/network
cat /etc/config/wireless
cat /etc/config/dhcp
cat /etc/config/firewall

This topic was automatically closed 10 days after the last reply. New replies are no longer allowed.