mkn001
September 12, 2020, 11:17pm
1
I've got a Fibocom modem on a WE826-T2 router (Flashed with latest GoldenOrb). I'm able to send AT commands and verify the modem working nominally via minicom, but for whatever reason OpenWRT can't connect to it.
T: Bus=01 Lev=02 Prnt=02 Port=02 Cnt=01 Dev#= 3 Spd=480 MxCh= 0
D: Ver= 2.00 Cls=00(>ifc ) Sub=00 Prot=00 MxPS=64 #Cfgs= 1
P: Vendor=1508 ProdID=1001 Rev= 3.18
S: Manufacturer=Fibocom NL668 Modem
S: Product=Fibocom NL668 Modem
I read somewhere that the Fibocom modem needs to be switched to "usbswitching mode" via AT command, but I couldn't find details in documentation.
AndrewZ
September 13, 2020, 9:24pm
2
Then better to ask in their forum.
2 Likes
mkn001
September 14, 2020, 4:56am
3
Same results with OpenWRT
hnyman
September 14, 2020, 5:03am
4
And the package "usb-modeswitch" does not help?
And have you installed the necessary drivers for USB modems?
mkn001
September 14, 2020, 5:15am
5
Yeah I installed usb-modeswitch and nothing. The system is recognizing it correctly in lsusb. The AT commands all work and respond accordingly (I doubled checked the usbmode too and it's set to USB).
AndrewZ
September 14, 2020, 7:11am
6
ROOter was the right choice in your case. Just re-install it and ask for help in their forum.
bmork
September 14, 2020, 8:37am
7
What does the rest of that section show? It's the I: and E: lines that tell us whether the modem must be switched or if you are having a driver problem. The C: lines are also very interesting in case there are more than one
mkn001
September 14, 2020, 8:53pm
8
T: Bus=01 Lev=02 Prnt=02 Port=02 Cnt=01 Dev#= 3 Spd=480 MxCh= 0
D: Ver= 2.00 Cls=00(>ifc ) Sub=00 Prot=00 MxPS=64 #Cfgs= 1
P: Vendor=1508 ProdID=1001 Rev= 3.18
S: Manufacturer=Fibocom NL668 Modem
S: Product=Fibocom NL668 Modem
S: SerialNumber=d4d2b975
C:* #Ifs= 6 Cfg#= 1 Atr=a0 MxPwr=500mA
I:* If#= 0 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=ff Driver=option
E: Ad=81(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E: Ad=01(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
I:* If#= 1 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=00 Prot=00 Driver=option
E: Ad=83(I) Atr=03(Int.) MxPS= 10 Ivl=32ms
E: Ad=82(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E: Ad=02(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
I:* If#= 2 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=00 Prot=00 Driver=option
E: Ad=85(I) Atr=03(Int.) MxPS= 10 Ivl=32ms
E: Ad=84(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E: Ad=03(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
I:* If#= 3 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=00 Prot=00 Driver=option
E: Ad=87(I) Atr=03(Int.) MxPS= 10 Ivl=32ms
E: Ad=86(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E: Ad=04(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
I:* If#= 4 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=ff Driver=GobiNet
E: Ad=89(I) Atr=03(Int.) MxPS= 8 Ivl=32ms
E: Ad=88(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E: Ad=05(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
I:* If#= 5 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=42 Prot=01 Driver=option
E: Ad=06(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E: Ad=8a(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms