Hi everyone,
opened 04:26AM - 06 Mar 16 UTC
closed 08:34AM - 19 Apr 16 UTC
I just got the 7688 Dou and am excited to try it out. I dont know hwat the issu… e is. When I power it over the USB cable it turns the greeen LED on then the Orange LED on, but the Orange LED never turns off. I connected using you recommendations here:
http://www.seeedstudio.com/wiki/LinkIt_Smart_7688_Duo
but mine orange LED never turns off, so I connected with an FTDI Basic and watched it boot. Seems fine, until the board gets to this part of the boot process:
[ 4.780000] sdhci-pltfm: SDHCI platform and OF driver helper
[ 4.790000] usbcore: registered new interface driver usb-storage
[ 4.810000] platform gpio-leds: Driver leds-gpio requests probe deferral
[ 5.180000] init: - preinit -
[ 6.210000] rt305x-esw 10110000.esw: link changed 0x00
[ 6.410000] random: mktemp urandom read with 9 bits of entropy available
Press the [f] key and hit [enter] to enter failsafe mode
Press the [1], [2], [3] or [4] key and hit [enter] to select the debug level
1
[ 7.620000] jffs2: notice: (368) jffs2_build_xattr_subsystem: complete building xattr subsystem, 0 of xdatum (0 unchecked, 0 orphan) and 0 of xref (0 dead, 0 orphan) found.
[ 7.670000] mount_root: switching to jffs2 overlay
[ 7.700000] procd: - early -
[ 7.710000] procd: - watchdog -
[ 8.510000] procd: - ubus -
[ 9.530000] procd: - init -
Please press Enter to activate this console.
Failed to executPlease press Enter to activate this console. <--HERE is where it bombs out, it will stick here and then respond to any further messages with
"Failed to executPlease press Enter to activate this console"
I dont know what to try next, seems to be failing to boot into the OS, but it is a brand new board just out of the box. Any guesses?
I had the same problem with link, "Failed to execute Please press Enter to activate this console" for unknown reasons, I want to enter failsafe mode to automatically execute scripts, such as "firstboot -y && reboot", how can I do it?