# Errors when using image builder for ipq806x **URL:** \ **Category:** For Developers\ **Created:** [July 3, 2019, 12:29am UTC](https://forum.openwrt.org/t/errors-when-using-image-builder-for-ipq806x/39992 "2019-07-03T00:29:55Z")\ **Posts on this page:** 11\ **Page:** 1
**Author:** ![fantom-x](https://forum.openwrt.org/letter_avatar/fantom-x/32/5_5575768a8748004e209b776fc1b2916d.png) [@fantom-x](https://forum.openwrt.org/u/fantom-x)\ **Post date:** [July 3, 2019, 12:29am UTC](https://forum.openwrt.org/t/errors-when-using-image-builder-for-ipq806x/39992/1 "2019-07-03T00:29:55Z")
Since a few days ago I cannot build an image for R7800 from master: the build fails with a lot of errors like below. I checked and that packages are indeed missing: is there a way to check the status of the build to know when it is in a better shape? ``` Collected errors: * opkg_install_cmd: Cannot install package hostapd-utils. * opkg_install_cmd: Cannot install package wpad-openssl. * satisfy_dependencies_for: Cannot satisfy the following dependencies for luci-ssl-openssl: * uhttpd * luci-base * luci-mod-status * luci-base * libuci20130104 * libubus20170705 * firewall * opkg * rpcd-mod-rrdns * libustream-openssl20150806 ``` ---
**Author:** ![jeff](https://forum.openwrt.org/letter_avatar/jeff/32/5_5575768a8748004e209b776fc1b2916d.png) [@jeff](https://forum.openwrt.org/u/jeff)\ **Post date:** [July 3, 2019, 12:38am UTC](https://forum.openwrt.org/t/errors-when-using-image-builder-for-ipq806x/39992/2 "2019-07-03T00:38:56Z")
[http://downloads.openwrt.org/snapshots/faillogs/](http://downloads.openwrt.org/snapshots/faillogs/) [http://phase2.builds.openwrt.org/](http://phase2.builds.openwrt.org/) ---
**Author:** ![hnyman](https://forum.openwrt.org/user_avatar/forum.openwrt.org/hnyman/32/19_2.png) [@hnyman](https://forum.openwrt.org/u/hnyman)\ **Post date:** [July 3, 2019, 4:19am UTC](https://forum.openwrt.org/t/errors-when-using-image-builder-for-ipq806x/39992/3 "2019-07-03T04:19:41Z")
Strange. I can't figure out any recent change that would make such a wide array of core packages to fail in phase2 buildbot, as those faillogs currently imply for most/all targets. @fantom-x Any recollection of how long you have noticed this? 2-3 days? or 1-2 weeks? ---
**Author:** ![hnyman](https://forum.openwrt.org/user_avatar/forum.openwrt.org/hnyman/32/19_2.png) [@hnyman](https://forum.openwrt.org/u/hnyman)\ **Post date:** [July 3, 2019, 5:01am UTC](https://forum.openwrt.org/t/errors-when-using-image-builder-for-ipq806x/39992/4 "2019-07-03T05:01:49Z")
Possibly due to the latest lua changes. Reference to: - [http://lists.infradead.org/pipermail/openwrt-devel/2019-July/017880.html](http://lists.infradead.org/pipermail/openwrt-devel/2019-July/017880.html) - [https://bugs.openwrt.org/index.php?do=details&task\_id=2348](https://bugs.openwrt.org/index.php?do=details&task_id=2348) ---
**Author:** ![hnyman](https://forum.openwrt.org/user_avatar/forum.openwrt.org/hnyman/32/19_2.png) [@hnyman](https://forum.openwrt.org/u/hnyman)\ **Post date:** [July 3, 2019, 6:35am UTC](https://forum.openwrt.org/t/errors-when-using-image-builder-for-ipq806x/39992/5 "2019-07-03T06:35:33Z")
Will be likely fixed by this commit, once the buildbot has completed new builds [https://git.openwrt.org/?p=openwrt/openwrt.git;a=commitdiff;h=47a984477b1d300047b3001971f0af0e371ea9ee](https://git.openwrt.org/?p=openwrt/openwrt.git;a=commitdiff;h=47a984477b1d300047b3001971f0af0e371ea9ee) ---
**Author:** ![fantom-x](https://forum.openwrt.org/letter_avatar/fantom-x/32/5_5575768a8748004e209b776fc1b2916d.png) [@fantom-x](https://forum.openwrt.org/u/fantom-x)\ **Post date:** [July 3, 2019, 11:25am UTC](https://forum.openwrt.org/t/errors-when-using-image-builder-for-ipq806x/39992/6 "2019-07-03T11:25:51Z")
Not sure if it matters any more, but it was failing for up to a week. Strangely, I was able to build (with image builder) the firmware for a Turris Omnia from master, but not for a r7800. ---
**Author:** ![hnyman](https://forum.openwrt.org/user_avatar/forum.openwrt.org/hnyman/32/19_2.png) [@hnyman](https://forum.openwrt.org/u/hnyman)\ **Post date:** [July 3, 2019, 11:39am UTC](https://forum.openwrt.org/t/errors-when-using-image-builder-for-ipq806x/39992/7 "2019-07-03T11:39:49Z")
> [@fantom-x](#): > > , but it was failing for up to a week. Yeah, if the reason for breakage was lua 5.3 introduction to OpenWrt sources, it was since last Friday, 28th of June. (and then it depends a bit on luck, how the packages have got built in the buildbot for various targets.) ---
**Author:** ![fantom-x](https://forum.openwrt.org/letter_avatar/fantom-x/32/5_5575768a8748004e209b776fc1b2916d.png) [@fantom-x](https://forum.openwrt.org/u/fantom-x)\ **Post date:** [July 3, 2019, 2:10pm UTC](https://forum.openwrt.org/t/errors-when-using-image-builder-for-ipq806x/39992/8 "2019-07-03T14:10:05Z")
Still failing, but the error is different now: ``` Collected errors: * satisfy_dependencies_for: Cannot satisfy the following dependencies for luci-app-statistics: * libip4tc0 * opkg_install_cmd: Cannot install package luci-app-statistics. Makefile:152: recipe for target 'package_install' failed make[2]: *** [package_install] Error 255 Makefile:111: recipe for target '_call_image' failed make[1]: *** [_call_image] Error 2 Makefile:195: recipe for target 'image' failed make: *** [image] Error 2 ``` ---
**Author:** ![hnyman](https://forum.openwrt.org/user_avatar/forum.openwrt.org/hnyman/32/19_2.png) [@hnyman](https://forum.openwrt.org/u/hnyman)\ **Post date:** [July 3, 2019, 2:54pm UTC](https://forum.openwrt.org/t/errors-when-using-image-builder-for-ipq806x/39992/9 "2019-07-03T14:54:56Z")
> [@fantom-x](#): > > Cannot satisfy the following dependencies for luci-app-statistics: \* libip4tc0 Likely temporary error. iptables has been updated to 1.8.3 a few hours ago, so libip4tc0 has been upgraded and has been compiled by the phase1 buildbot (for armvirt) but phase2 buildbot has maybe not built the updated luci-app-statistics module after the iptables bump (so the dependency may be to wrong version). I assume that the error will get fixed automatically in the next build rounds. Ps. I build always my own builds from scratch. Much easier, as there is no dependency from the buildbot's cycle. ---
**Author:** ![fantom-x](https://forum.openwrt.org/letter_avatar/fantom-x/32/5_5575768a8748004e209b776fc1b2916d.png) [@fantom-x](https://forum.openwrt.org/u/fantom-x)\ **Post date:** [July 3, 2019, 3:18pm UTC](https://forum.openwrt.org/t/errors-when-using-image-builder-for-ipq806x/39992/10 "2019-07-03T15:18:48Z")
> [@hnyman](#): > > Ps. I build always my own builds from scratch. Much easier, as there is no dependency from the buildbot's cycle. I used to do that too, but it is time consuming. I really like using the image builder now and it only takes 5..10 minutes. I would rather be using 19.07, but it is not available so I have to use master to get the switch SNMP counter fix. There are not any customization I need to do any more. ---
**Author:** ![system](https://forum.openwrt.org/uploads/default/original/3X/7/4/740520c71f00039bbf001045c682f0ecb25e905a.png) [@system](https://forum.openwrt.org/u/system)\ **Post date:** [July 13, 2019, 3:18pm UTC](https://forum.openwrt.org/t/errors-when-using-image-builder-for-ipq806x/39992/11 "2019-07-13T15:18:49Z")
This topic was automatically closed 10 days after the last reply. New replies are no longer allowed.