ERROR:flash openwrt firmware to a board with QSDK firmware

[lleachii]

@liveonlinux

How can I do?

Issue with OpenWrt Sysupgrade on IPQ40xx device with QSDK stock firmware

I suggest always to use dumpimage -l and compare the working image with new image you have produced to double check it first. CLI sysupgrade --test does the check as well. QSDK openwrt has sysupgrade image with check routines to detect mandatory image components.

• Figure out the "check routines"
• After doing so, I also suggest you request a Wiki and Techdata page so you can add your device; in order to post what you figured out for others

(BTW, this means your device is not officially supported...yet.)