Engenius ENH202 snapshots/stable builds missing

g6094199 · October 9, 2021, 9:03pm

i'm trying to download the snapshot and/or stable builds for the ENH202v1 but it seems the images dont get built.

hnyman · October 9, 2021, 9:10pm

Based on source code changes, it was moved to "tiny" section already in January. Likely both 21.02 and master are too big for it.

github.com/openwrt/openwrt

ath79: move small-flash Engenius boards to tiny

committed 09:48PM - 01 Jan 21 UTC

mpratt14

+104 -100

This moves some of the Engenius boards from generic to tiny: - EAP350 v1 - EC…B350 v1 - ENH202 v1 For these, factory.bin builds are already failing on master branch because of the unique situation for these boards: - 8 MB flash - an extra "failsafe" image for recovery - TFTP does not work (barely possible with 600 MTU) - bootloader loads image from a longer flash offset - 1 eraseblock each needed for OKLI kernel loader and fake rootfs - using mtd-concat to make use of remaining space... The manual alternative would be removing the failsafe partition. However this comes with the risk of extremely difficult recovery if a flash ever fails because TFTP on the bootloader is bugged. Signed-off-by: Michael Pratt <mcpratt@pm.me> [improve commit message] Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>

It seems to be a 32 MB RAM device with only 8 MB flash...

You might read:

https://openwrt.org/supported_devices/864_warning
(and the older https://openwrt.org/supported_devices/432_warning )

g6094199 · October 9, 2021, 9:15pm

ok got it. then the links in the wiki are wrong. maybe for other engenius devices to....