Easybox 904 xdsl u-boot password

Hi,
was anybody able to find the bootloader password? I was reading old archived openwrt forum and it seems it is still unknown. Is the hash 25b4e03c08bc9b4003316c7c47e9f3f88dd7f3d1 the correct one? (the uboot firmware should be original, I only flashed "opened vendor Firmware-Image").

1 Like

Got the hash from this web. And indeed there is the same string in decompressed u-boot image. (... other question is if the decompression works and the string is really the hash)

The password is correct.

please input password : ****************************************
-------------- Current state before activating switch ------
[main_loop:828]vr9_mdio_read( 0x00, 0x0 )=0xffff
[main_loop:829]vr9_mdio_read( 0x01, 0x0 )=0xffff
[main_loop:830]vr9_mdio_read( 0x11, 0x0 )=0x1840
[main_loop:831]vr9_mdio_read( 0x12, 0x0 )=0xffff
[main_loop:832]vr9_mdio_read( 0x13, 0x0 )=0x1840
[main_loop:833]vr9_mdio_read( 0x14, 0x0 )=0xffff

------------------------------------------------------------
-------------- Current state after activating switch -------
[main_loop:845]vr9_mdio_read( 0x00, 0x0 )=0xffff
[main_loop:846]vr9_mdio_read( 0x01, 0x0 )=0xffff
[main_loop:847]vr9_mdio_read( 0x11, 0x0 )=0x1040
[main_loop:848]vr9_mdio_read( 0x12, 0x0 )=0xffff
[main_loop:849]vr9_mdio_read( 0x13, 0x0 )=0x1040
[main_loop:850]vr9_mdio_read( 0x14, 0x0 )=0xffff

------------------------------------------------------------
rtl8367rb init successful ....
VR9 # 

That is not a password, 25b4e03c08bc9b4003316c7c47e9f3f88dd7f3d1 is just a hash. Do you have original uboot or patched one (which accepts any string)?

Yes, you are right. That is a hash. And I have a hacked bootloader. My mistake.