Easily Unbrick TPLink WR841N V14 using stripped firmware

Installing and Using OpenWrt
1

Lets start---->

  • Download striped stock firmware-->
    1.For Europian Zone
    2.For US Zone [not tested]

  • Now Download TFTP from the web

  • Configure Your PC,s Ethernet
    1. Set IP adress: 192.168.10.66
    2. set netmask: 255.255.255.0

  • Set tp_recovery.bin file location and ethernet ip in TFTP

  • Connect router to your PC by ethernet cable

  • Connect power on router and Hold on wps button imediately.

  • When the TFTP prompt screen shown ,hold off the wps button

  • Wait for sometimes and Your tl-wr841n V14 unbricked :rofl: :rofl:

Visit this thread to Thanks the Master :grinning: :grinning:

1 Like
2

Thank you very much :slight_smile:

1 Like
3

This topic was automatically closed 10 days after the last reply. New replies are no longer allowed.