EAP102 factory image ubin

Installing and Using OpenWrt
1

Hi,

Can anyone help me due to I'm trying to install openwrt on our EAP102 with the pre-built factory image from the hardware of table of openwrt.

I'm using the webgui to install the factory image file but im having error that its not supported.

Do I need to use the TFTP way to flash the factory image? the downloaded file is .ubin extension.

Thank you for your guidance.

2

you need serial + TFTP.

https://git.openwrt.org/?p=openwrt/openwrt.git;a=commit;h=6e03304c76aee6fc5c3139f4af8c24665ec7f89b

3

Hi frollic,
I have tried and was successful in installing the openwrt on my EAP102. but im having issues after the flashing.

d[ 1093.689573] hsl_phy_phydev_get[773]:ERROR:phy_addr 0 phydev is NULL
[ 1093.689608] hsl_phy_phydev_get[773]:ERROR:phy_addr 1 phydev is NULL
[ 1093.694646] hsl_phy_phydev_get[773]:ERROR:phy_addr 2 phydev is NULL
[ 1093.700913] hsl_phy_phydev_get[773]:ERROR:phy_addr 3 phydev is NULL
mes[ 1094.729577] hsl_phy_phydev_get[773]:ERROR:phy_addr 0 phydev is NULL
[ 1094.729612] hsl_phy_phydev_get[773]:ERROR:phy_addr 1 phydev is NULL
[ 1094.734649] hsl_phy_phydev_get[773]:ERROR:phy_addr 2 phydev is NULL
[ 1094.740919] hsl_phy_phydev_get[773]:ERROR:phy_addr 3 phydev is NULL
g -n[ 1095.769576] hsl_phy_phydev_get[773]:ERROR:phy_addr 0 phydev is NULL
[ 1095.769611] hsl_phy_phydev_get[773]:ERROR:phy_addr 1 phydev is NULL
[ 1095.774661] hsl_phy_phydev_get[773]:ERROR:phy_addr 2 phydev is NULL
[ 1095.780919] hsl_phy_phydev_get[773]:ERROR:phy_addr 3 phydev is NULL
[ 1096.809577] hsl_phy_phydev_get[773]:ERROR:phy_addr 0 phydev is NULL
[ 1096.809611] hsl_phy_phydev_get[773]:ERROR:phy_addr 1 phydev is NULL
[ 1096.814650] hsl_phy_phydev_get[773]:ERROR:phy_addr 2 phydev is NULL
[ 1096.820928] hsl_phy_phydev_get[773]:ERROR:phy_addr 3 phydev is NULL

I have tried reading some details regarding this issue on the forums but i did not fully understand how to fix the issue, do anyone else here know how to fix this?

Thank You

4

try the 24.10rc2 or a snapshot.

5

Hi frollic,
This worked for me. Thank you very much

1 Like
6

thank you for posting the confirmation.

7

This topic was automatically closed 10 days after the last reply. New replies are no longer allowed.