E4200v2 19.07.1 vs snapshot?

Ramon · September 28, 2020, 6:30am

Hi all,,

I have a two r7800 as wifi AP and one of them I use as main router. I also have a e4200v2 which I use as a managed switch. I see the latest supported version is 19.07.1, but it is also supported on the snapshot. Which version should i use, and how come it is supported again on snapshot but not on latest stable?

Thanks

slh · September 28, 2020, 6:43am

https://downloads.openwrt.org/releases/19.07.4/targets/kirkwood/generic/openwrt-19.07.4-kirkwood-linksys_viper-squashfs-sysupgrade.bin?

Ramon · September 28, 2020, 6:51am

well im a bit hesitant as https://openwrt.org/toh/hwdata/linksys/linksys_e4200_v2 says 19.07.1 as well as https://openwrt.org/toh/views/toh_fwdownload?dataflt%5BModel*%7E%5D=e4200 "supported current rel" 19.07.1.

So is it supported by latest stable? If so ill flash that.

Thanks

tmomas · September 28, 2020, 7:23am

Not sure why the E4200 v2 hasn't been updated to 19.07.4. Anyways, I just did the update.

Ramon · September 28, 2020, 8:07am

alright 19.07.4 it is!

Thanks all

Ramon · September 28, 2020, 4:14pm

Well install was fine, but wifi does not work (i dont really need it, but was just trying it out to see if it would work)...

Mon Sep 28 18:08:38 2020 user.notice mac80211: Failed command: iw phy phy0 set antenna 0xffffffff 0xffffffff
Mon Sep 28 18:08:38 2020 user.notice mac80211: Failed command: iw phy phy1 set antenna 0xffffffff 0xffffffff
Mon Sep 28 18:08:38 2020 daemon.notice netifd: radio2 (10965): command failed: Not supported (-95)
Mon Sep 28 18:08:38 2020 daemon.notice netifd: radio3 (10966): command failed: Not supported (-95)
Mon Sep 28 18:08:38 2020 user.notice mac80211: Failed command: iw phy phy0 set distance 0
Mon Sep 28 18:08:38 2020 user.notice mac80211: Failed command: iw phy phy1 set distance 0
Mon Sep 28 18:08:39 2020 daemon.err hostapd: Configuration file: /var/run/hostapd-phy0.conf
Mon Sep 28 18:08:39 2020 daemon.err hostapd: Configuration file: /var/run/hostapd-phy1.conf
Mon Sep 28 18:08:39 2020 kern.info kernel: [27404.998117] IPv6: ADDRCONF(NETDEV_UP): wlan1: link is not ready
Mon Sep 28 18:08:39 2020 kern.info kernel: [27405.033726] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
Mon Sep 28 18:08:39 2020 kern.info kernel: [27405.041731] br-lan: port 2(wlan1) entered blocking state
Mon Sep 28 18:08:39 2020 kern.info kernel: [27405.047077] br-lan: port 2(wlan1) entered disabled state
Mon Sep 28 18:08:39 2020 kern.info kernel: [27405.052709] device wlan1 entered promiscuous mode
Mon Sep 28 18:08:39 2020 kern.info kernel: [27405.070630] br-lan: port 3(wlan0) entered blocking state
Mon Sep 28 18:08:39 2020 kern.info kernel: [27405.075976] br-lan: port 3(wlan0) entered disabled state
Mon Sep 28 18:08:39 2020 kern.info kernel: [27405.081591] device wlan0 entered promiscuous mode
Mon Sep 28 18:08:39 2020 daemon.notice hostapd: wlan1: interface state UNINITIALIZED->COUNTRY_UPDATE
Mon Sep 28 18:08:39 2020 daemon.notice hostapd: ACS: Automatic channel selection started, this may take a bit
Mon Sep 28 18:08:39 2020 daemon.notice hostapd: wlan1: interface state COUNTRY_UPDATE->ACS
Mon Sep 28 18:08:39 2020 daemon.notice hostapd: wlan1: ACS-STARTED
Mon Sep 28 18:08:39 2020 daemon.notice hostapd: wlan0: interface state UNINITIALIZED->COUNTRY_UPDATE
Mon Sep 28 18:08:39 2020 daemon.notice hostapd: ACS: Automatic channel selection started, this may take a bit
Mon Sep 28 18:08:39 2020 daemon.notice hostapd: wlan0: interface state COUNTRY_UPDATE->ACS
Mon Sep 28 18:08:39 2020 daemon.notice hostapd: wlan0: ACS-STARTED
Mon Sep 28 18:08:45 2020 daemon.notice hostapd: wlan1: ACS-COMPLETED freq=5180 channel=36
Mon Sep 28 18:08:45 2020 daemon.err hostapd: Using interface wlan1 with hwaddr 58:6d:8f:f9:b4:84 and ssid "OpenWrt4b"
Mon Sep 28 18:08:45 2020 kern.info kernel: [27411.619597] IPv6: ADDRCONF(NETDEV_CHANGE): wlan1: link becomes ready
Mon Sep 28 18:08:45 2020 kern.info kernel: [27411.626131] br-lan: port 2(wlan1) entered blocking state
Mon Sep 28 18:08:45 2020 kern.info kernel: [27411.631500] br-lan: port 2(wlan1) entered forwarding state
Mon Sep 28 18:08:45 2020 daemon.err hostapd: Interface initialization failed
Mon Sep 28 18:08:45 2020 daemon.notice hostapd: wlan1: interface state ACS->DISABLED
Mon Sep 28 18:08:45 2020 daemon.notice hostapd: wlan1: AP-DISABLED
Mon Sep 28 18:08:45 2020 daemon.err hostapd: ACS: Possibly channel configuration is invalid, please report this along with your config file.
Mon Sep 28 18:08:45 2020 daemon.err hostapd: ACS: Failed to start
Mon Sep 28 18:08:45 2020 daemon.notice hostapd: wlan1: AP-DISABLED
Mon Sep 28 18:08:45 2020 daemon.err hostapd: hostapd_free_hapd_data: Interface wlan1 wasn't started
Mon Sep 28 18:08:45 2020 daemon.notice hostapd: nl80211: deinit ifname=wlan1 disabled_11b_rates=0
Mon Sep 28 18:08:45 2020 kern.info kernel: [27411.661609] device wlan1 left promiscuous mode
Mon Sep 28 18:08:45 2020 kern.info kernel: [27411.666213] br-lan: port 2(wlan1) entered disabled state
Mon Sep 28 18:08:46 2020 daemon.notice hostapd: wlan1: interface state DISABLED->DISABLED
Mon Sep 28 18:08:46 2020 daemon.notice hostapd: wlan1: interface state DISABLED->DISABLED
Mon Sep 28 18:08:46 2020 daemon.notice hostapd: wlan1: AP-DISABLED
Mon Sep 28 18:08:46 2020 daemon.notice hostapd: wlan1: CTRL-EVENT-TERMINATING
Mon Sep 28 18:08:46 2020 daemon.err hostapd: hostapd_free_hapd_data: Interface wlan1 wasn't started
Mon Sep 28 18:08:46 2020 daemon.notice hostapd: ELOOP: remaining socket: sock=22 eloop_data=0xb6f80dc0 user_data=0 handler=0xc3274
Mon Sep 28 18:08:46 2020 daemon.notice netifd: radio3 (10966): cat: can't open '/var/run/wifi-phy1.pid': No such file or directory
Mon Sep 28 18:08:46 2020 daemon.notice netifd: radio3 (10966): WARNING (wireless_add_process): executable path /usr/sbin/wpad does not match process  path (/proc/exe)
Mon Sep 28 18:08:46 2020 daemon.notice netifd: radio3 (10966): Command failed: Invalid argument
Mon Sep 28 18:08:46 2020 kern.info kernel: [27411.767998] IPv6: ADDRCONF(NETDEV_UP): wlan1: link is not ready
Mon Sep 28 18:08:46 2020 kern.info kernel: [27411.809250] br-lan: port 2(wlan1) entered blocking state
Mon Sep 28 18:08:46 2020 kern.info kernel: [27411.814590] br-lan: port 2(wlan1) entered disabled state
Mon Sep 28 18:08:46 2020 kern.info kernel: [27411.820210] device wlan1 entered promiscuous mode
Mon Sep 28 18:08:46 2020 kern.info kernel: [27411.825024] br-lan: port 2(wlan1) entered blocking state
Mon Sep 28 18:08:46 2020 kern.info kernel: [27411.830382] br-lan: port 2(wlan1) entered forwarding state
Mon Sep 28 18:08:46 2020 kern.info kernel: [27412.629017] br-lan: port 2(wlan1) entered disabled state
Mon Sep 28 18:08:48 2020 daemon.notice hostapd: wlan0: ACS-COMPLETED freq=2472 channel=13
Mon Sep 28 18:08:48 2020 daemon.err hostapd: Using interface wlan0 with hwaddr 58:6d:8f:f9:b4:82 and ssid "OpenWrt1"
Mon Sep 28 18:08:48 2020 kern.info kernel: [27414.430151] IPv6: ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
Mon Sep 28 18:08:48 2020 kern.info kernel: [27414.436679] br-lan: port 3(wlan0) entered blocking state
Mon Sep 28 18:08:48 2020 kern.info kernel: [27414.442044] br-lan: port 3(wlan0) entered forwarding state
Mon Sep 28 18:08:48 2020 daemon.err hostapd: Interface initialization failed
Mon Sep 28 18:08:48 2020 daemon.notice hostapd: wlan0: interface state ACS->DISABLED
Mon Sep 28 18:08:48 2020 daemon.notice hostapd: wlan0: AP-DISABLED
Mon Sep 28 18:08:48 2020 daemon.err hostapd: ACS: Possibly channel configuration is invalid, please report this along with your config file.
Mon Sep 28 18:08:48 2020 daemon.err hostapd: ACS: Failed to start
Mon Sep 28 18:08:48 2020 daemon.notice hostapd: wlan0: AP-DISABLED
Mon Sep 28 18:08:48 2020 daemon.err hostapd: hostapd_free_hapd_data: Interface wlan0 wasn't started
Mon Sep 28 18:08:48 2020 daemon.notice hostapd: nl80211: deinit ifname=wlan0 disabled_11b_rates=0
Mon Sep 28 18:08:48 2020 kern.info kernel: [27414.471628] device wlan0 left promiscuous mode
Mon Sep 28 18:08:48 2020 kern.info kernel: [27414.476171] br-lan: port 3(wlan0) entered disabled state
Mon Sep 28 18:08:48 2020 daemon.notice hostapd: wlan0: interface state DISABLED->DISABLED
Mon Sep 28 18:08:48 2020 daemon.notice hostapd: wlan0: interface state DISABLED->DISABLED
Mon Sep 28 18:08:48 2020 daemon.notice hostapd: wlan0: AP-DISABLED
Mon Sep 28 18:08:48 2020 daemon.notice hostapd: wlan0: CTRL-EVENT-TERMINATING
Mon Sep 28 18:08:48 2020 daemon.err hostapd: hostapd_free_hapd_data: Interface wlan0 wasn't started
Mon Sep 28 18:08:48 2020 daemon.notice hostapd: ELOOP: remaining socket: sock=21 eloop_data=0xb6d51060 user_data=0 handler=0xc3274
Mon Sep 28 18:08:48 2020 daemon.notice netifd: radio2 (10965): cat: can't open '/var/run/wifi-phy0.pid': No such file or directory
Mon Sep 28 18:08:48 2020 daemon.notice netifd: radio2 (10965): WARNING (wireless_add_process): executable path /usr/sbin/wpad does not match process  path (/proc/exe)
Mon Sep 28 18:08:48 2020 daemon.notice netifd: radio2 (10965): Command failed: Invalid argument
Mon Sep 28 18:08:48 2020 kern.info kernel: [27414.577377] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
Mon Sep 28 18:08:48 2020 kern.info kernel: [27414.618381] br-lan: port 3(wlan0) entered blocking state
Mon Sep 28 18:08:48 2020 kern.info kernel: [27414.623721] br-lan: port 3(wlan0) entered disabled state
Mon Sep 28 18:08:48 2020 kern.info kernel: [27414.629311] device wlan0 entered promiscuous mode
Mon Sep 28 18:08:48 2020 kern.info kernel: [27414.634118] br-lan: port 3(wlan0) entered blocking state
Mon Sep 28 18:08:48 2020 kern.info kernel: [27414.639487] br-lan: port 3(wlan0) entered forwarding state
Mon Sep 28 18:08:49 2020 kern.info kernel: [27415.509076] br-lan: port 3(wlan0) entered disabled state

Ramon · September 29, 2020, 8:27pm

Seems to work now after removing wifi networks and re-adding them!
(Disabled them for now as I do not need them, but good to know I can use them if needed)

system · October 9, 2020, 8:27pm

This topic was automatically closed 10 days after the last reply. New replies are no longer allowed.