is there any direct guide to configure dynu ddns via luci?
1 Like
you've already tried "openwrt ddns" @ google, right ?
Yes i have tried, and it rwfers to script in /etc config something. Which is fine, but i was wondering if there is luci then it would be simpler, but apparently not.
For example: what should I put in username?
Hence asking if there is easier luci way to implement ddns using dynu provider
I have doubts.
https://openwrt.org/docs/guide-user/services/ddns/client#web_interface_instructions1
I really don't know how to put this nicely, but you didn't do anything to solve the problem on your own.
Use the technology available to you. And since you are online, use GPT or alternatives.
Here
On top of that, there's also https://openwrt.org/docs/guide-user/services/ddns/client#dynucom
1 Like
you were right! I did not looked thoroughly. my mistake
i caught my mistake as i was putting my password with [ ] these bracket. therefore i didnt succeed to get results.
I had success with ipv4 but not with ipv6 below is the log. ipv6 ddns entry says no data.
205643 : ************ ************** ************** **************
205643 note : PID '11934' started at 2024-12-19 20:56
205643 : ddns version : 2.8.2-43
205643 : uci configuration:
ddns.dynuv6.cacert='/etc/ssl/certs'
ddns.dynuv6.check_interval='12'
ddns.dynuv6.check_unit='minutes'
ddns.dynuv6.domain='hell00'
ddns.dynuv6.enabled='1'
ddns.dynuv6.force_unit='minutes'
ddns.dynuv6.interface='wan6'
ddns.dynuv6.ip_network='wan6'
ddns.dynuv6.ip_source='network'
ddns.dynuv6.lookup_host='hell00.ooguy.com'
ddns.dynuv6.password='***PW***'
ddns.dynuv6.retry_unit='seconds'
ddns.dynuv6.service_name='dynu.com'
ddns.dynuv6.use_https='1'
ddns.dynuv6.use_ipv6='1'
ddns.dynuv6.use_syslog='2'
ddns.dynuv6.username='hell00'
ddns.dynuv6=service
205643 : verbose mode : 0 - run normal, NO console output
205644 : check interval: 720 seconds
205644 : force interval: 4320 seconds
205644 : retry interval: 60 seconds
205644 : retry max count : 0 times
205644 : No old process
205644 : last update: never
205644 : Detect registered/public IP
205644 : #> /usr/bin/nslookup hell00.ooguy.com >/var/run/ddns/dynuv6.dat 2>/var/run/ddns/dynuv6.err
205644 WARN : NO valid IP found
205644 WARN : Error in 'expand_ipv6()' - invalid IPv6 found: '' expanded: ''
205644 info : Starting main loop at 2024-12-19 20:56
205644 : Detect current IP on 'network'
205644 : Current IP '2001:9b1:10d:dc::29f' detected on network 'wan6'
205644 : Update needed - L: '2001:09b1:010d:00dc:0000:0000:0000:029f' <> R: 'invalid'
205644 : Force communication via device 'wan'
merry christmas from sweden 
2 Likes
This topic was automatically closed 10 days after the last reply. New replies are no longer allowed.