Dynalink DL-WRX36 Askey RT5010W IPQ8072A technical discussion

[Oliumen]

@echop

"inventreason697"

SSID: DYNALINK-AE
For users looking for the wifi password it is : "inventreason697"

This is for the config file that enables SSH. WiFi is enabled with the above password.

That's awesome. I can confirm it works but, what about the web gui password?

==

EDIT: After reading for hours going through a bunch of non-sense talking and other garbage that was unrelated I found this...

@S7venLights

then logon using SSH as: admin / askey1234"

Dynalink DL-WRX36 Install

The enumeration varies by the stick type, and is naturally related to the router's OS, so Windows has no knowledge about Linux enumeration. Example of trying three sticks in my MT6000 router: (note "usbutils" installed for "lsusb" command, but the same info is in the system log, too.) Old slow stick got 1:2 while new USB3 sticks got 2:1 root@router6000:~# opkg install usbutils Installing usbutils (017-r1) to root... Stick1: root@router6000:~# lsusb Bus 001 Device 001: ID 1d6b:0002 Linux …

And this worked for me. I was able to login via ssh using that information following the instructions provided here...

https://openwrt.org/toh/dynalink/dl-wrx36

Man, someone should add that CRUCIAL detail to the installation instructions. Can't login to ssh or web gui, or even wifi to access the web gui without all that backup configuration's passwords.

===

EDIT:

Web GUI password is askey1234 as well.