Dynalink DL-WRX36 Askey RT5010W IPQ8072A technical discussion

yes it is currently running OEM firmware with the ssh enabling config (askey1234 password)

i can ssh into it and fw_printenv does show changes have been made using the fw_setenv. however after reboot it still boot with the same LAN ip 192.168.216.1 rather than 192.168.1.1.

the *.itb on the drive is the exact same name as the command in the wiki, and the usb is formatted FAT32.

trying to run "usb", "fatload", "bootm" return -ash: X not found causing me to wonder if my unit somehow boot differently