[ 0.000000] Booting Linux on physical CPU 0x0000000000 [0x411fd090]
[ 0.000000] Linux version 6.12.66 (ncasu@v2202411208353296208) (aarch64-openwrt-linux-musl-gcc (OpenWrt GCC 14.3.0 r32502-27b48d0002) 14.3.0, GNU ld (GNU Binutils) 2.44) #0 SMP Sat Jan 24 21:38:56 2026
[ 0.000000] Machine model: Banana Pi BPI-R4 (2x SFP+)
[ 0.000000] OF: reserved mem: 0x0000000042ff0000..0x0000000042ffffff (64 KiB) map non-reusable ramoops@42ff0000
[ 0.000000] OF: reserved mem: 0x0000000043000000..0x000000004304ffff (320 KiB) nomap non-reusable secmon@43000000
[ 0.000000] OF: reserved mem: 0x0000000047cc0000..0x0000000047dbffff (1024 KiB) nomap non-reusable wmcpu-reserved@47cc0000
[ 0.000000] OF: reserved mem: 0x000000004f600000..0x000000004f63ffff (256 KiB) nomap non-reusable wo-emi@4f600000
[ 0.000000] OF: reserved mem: 0x000000004f640000..0x000000004f67ffff (256 KiB) nomap non-reusable wo-emi@4f640000
[ 0.000000] OF: reserved mem: 0x000000004f680000..0x000000004f6bffff (256 KiB) nomap non-reusable wo-emi@4f680000
[ 0.000000] OF: reserved mem: 0x000000004f700000..0x000000004fefffff (8192 KiB) nomap non-reusable wo-data@4f700000
[ 0.000000] Zone ranges:
[ 0.000000] DMA [mem 0x0000000040000000-0x00000000ffffffff]
[ 0.000000] DMA32 empty
[ 0.000000] Normal [mem 0x0000000100000000-0x000000013fffffff]
[ 0.000000] Movable zone start for each node
[ 0.000000] Early memory node ranges
[ 0.000000] node 0: [mem 0x0000000040000000-0x0000000042ffffff]
[ 0.000000] node 0: [mem 0x0000000043000000-0x000000004304ffff]
[ 0.000000] node 0: [mem 0x0000000043050000-0x0000000047cbffff]
[ 0.000000] node 0: [mem 0x0000000047cc0000-0x0000000047dbffff]
[ 0.000000] node 0: [mem 0x0000000047dc0000-0x000000004f5fffff]
[ 0.000000] node 0: [mem 0x000000004f600000-0x000000004f6bffff]
[ 0.000000] node 0: [mem 0x000000004f6c0000-0x000000004f6fffff]
[ 0.000000] node 0: [mem 0x000000004f700000-0x000000004fefffff]
[ 0.000000] node 0: [mem 0x000000004ff00000-0x000000013fffffff]
[ 0.000000] Initmem setup node 0 [mem 0x0000000040000000-0x000000013fffffff]
[ 0.000000] psci: probing for conduit method from DT.
[ 0.000000] psci: PSCIv1.1 detected in firmware.
[ 0.000000] psci: Using standard PSCI v0.2 function IDs
[ 0.000000] psci: MIGRATE_INFO_TYPE not supported.
[ 0.000000] psci: SMC Calling Convention v1.5
[ 0.000000] percpu: Embedded 30 pages/cpu s83032 r8192 d31656 u122880
[ 0.000000] pcpu-alloc: s83032 r8192 d31656 u122880 alloc=30*4096
[ 0.000000] pcpu-alloc: [0] 0 [0] 1 [0] 2 [0] 3
[ 0.000000] Detected VIPT I-cache on CPU0
[ 0.000000] CPU features: detected: GIC system register CPU interface
[ 0.000000] CPU features: detected: Spectre-BHB
[ 0.000000] CPU features: kernel page table isolation disabled by kernel configuration
[ 0.000000] alternatives: applying boot alternatives
[ 0.000000] Kernel command line: console=ttyS0,115200n1 pci=pcie_bus_perf root=/dev/fit0 rootwait
[ 0.000000] Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes, linear)
[ 0.000000] Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes, linear)
[ 0.000000] Built 1 zonelists, mobility grouping on. Total pages: 1048576
[ 0.000000] mem auto-init: stack:off, heap alloc:off, heap free:off
[ 0.000000] software IO TLB: area num 4.
[ 0.000000] software IO TLB: mapped [mem 0x00000000fa7d1000-0x00000000fe7d1000] (64MB)
[ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
[ 0.000000] rcu: Hierarchical RCU implementation.
[ 0.000000] Tracing variant of Tasks RCU enabled.
[ 0.000000] rcu: RCU calculated value of scheduler-enlistment delay is 10 jiffies.
[ 0.000000] RCU Tasks Trace: Setting shift to 2 and lim to 1 rcu_task_cb_adjust=1 rcu_task_cpu_ids=4.
[ 0.000000] NR_IRQS: 64, nr_irqs: 64, preallocated irqs: 0
[ 0.000000] GICv3: GIC: Using split EOI/Deactivate mode
[ 0.000000] GICv3: 416 SPIs implemented
[ 0.000000] GICv3: 0 Extended SPIs implemented
[ 0.000000] Root IRQ handler: gic_handle_irq
[ 0.000000] GICv3: GICv3 features: 16 PPIs
[ 0.000000] GICv3: GICD_CTRL.DS=0, SCR_EL3.FIQ=0
[ 0.000000] GICv3: CPU0: found redistributor 0 region 0:0x000000000c080000
[ 0.000000] rcu: srcu_init: Setting srcu_struct sizes based on contention.
[ 0.000000] arch_timer: cp15 timer(s) running at 13.00MHz (phys).
[ 0.000000] clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0x2ff89eacb, max_idle_ns: 440795202429 ns
[ 0.000000] sched_clock: 56 bits at 13MHz, resolution 76ns, wraps every 4398046511101ns
[ 0.000252] Calibrating delay loop (skipped), value calculated using timer frequency.. 26.00 BogoMIPS (lpj=130000)
[ 0.000260] pid_max: default: 32768 minimum: 301
[ 0.002375] Mount-cache hash table entries: 8192 (order: 4, 65536 bytes, linear)
[ 0.002389] Mountpoint-cache hash table entries: 8192 (order: 4, 65536 bytes, linear)
[ 0.003969] cacheinfo: Unable to detect cache hierarchy for CPU 0
[ 0.004440] rcu: Hierarchical SRCU implementation.
[ 0.004443] rcu: Max phase no-delay instances is 1000.
[ 0.004541] Timer migration: 1 hierarchy levels; 8 children per group; 1 crossnode level
[ 0.004798] smp: Bringing up secondary CPUs ...
[ 0.005030] Detected VIPT I-cache on CPU1
[ 0.005065] GICv3: CPU1: found redistributor 1 region 0:0x000000000c0a0000
[ 0.005089] CPU1: Booted secondary processor 0x0000000001 [0x411fd090]
[ 0.005384] Detected VIPT I-cache on CPU2
[ 0.005405] GICv3: CPU2: found redistributor 2 region 0:0x000000000c0c0000
[ 0.005416] CPU2: Booted secondary processor 0x0000000002 [0x411fd090]
[ 0.005657] Detected VIPT I-cache on CPU3
[ 0.005678] GICv3: CPU3: found redistributor 3 region 0:0x000000000c0e0000
[ 0.005689] CPU3: Booted secondary processor 0x0000000003 [0x411fd090]
[ 0.005724] smp: Brought up 1 node, 4 CPUs
[ 0.005728] SMP: Total of 4 processors activated.
[ 0.005730] CPU: All CPU(s) started at EL2
[ 0.005732] CPU features: detected: 32-bit EL0 Support
[ 0.005735] CPU features: detected: CRC32 instructions
[ 0.005759] alternatives: applying system-wide alternatives
[ 0.005847] CPU features: emulated: Privileged Access Never (PAN) using TTBR0_EL1 switching
[ 0.005963] Memory: 4012128K/4194304K available (10624K kernel code, 1676K rwdata, 7312K rodata, 576K init, 337K bss, 178076K reserved, 0K cma-reserved)
[ 0.009237] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns
[ 0.009247] futex hash table entries: 1024 (order: 4, 65536 bytes, linear)
[ 0.009299] 27584 pages in range for non-PLT usage
[ 0.009301] 519104 pages in range for PLT usage
[ 0.010287] pinctrl core: initialized pinctrl subsystem
[ 0.011876] NET: Registered PF_NETLINK/PF_ROUTE protocol family
[ 0.012173] DMA: preallocated 512 KiB GFP_KERNEL pool for atomic allocations
[ 0.012272] DMA: preallocated 512 KiB GFP_KERNEL|GFP_DMA pool for atomic allocations
[ 0.012366] DMA: preallocated 512 KiB GFP_KERNEL|GFP_DMA32 pool for atomic allocations
[ 0.012641] thermal_sys: Registered thermal governor 'fair_share'
[ 0.012644] thermal_sys: Registered thermal governor 'bang_bang'
[ 0.012646] thermal_sys: Registered thermal governor 'step_wise'
[ 0.012648] thermal_sys: Registered thermal governor 'user_space'
[ 0.012687] hw-breakpoint: found 6 breakpoint and 4 watchpoint registers.
[ 0.012724] ASID allocator initialised with 65536 entries
[ 0.013407] pstore: Using crash dump compression: deflate
[ 0.013414] printk: legacy console [ramoops-1] enabled
[ 0.013664] pstore: Registered ramoops as persistent store backend
[ 0.013669] ramoops: using 0x10000@0x42ff0000, ecc: 0
[ 0.015569] /soc/interrupt-controller@c000000: Fixed dependency cycle(s) with /soc/interrupt-controller@c000000
[ 0.018975] /soc/pcie@11280000: Fixed dependency cycle(s) with /soc/pcie@11280000/interrupt-controller
[ 0.019077] /soc/pcie@11290000: Fixed dependency cycle(s) with /soc/pcie@11290000/interrupt-controller
[ 0.019169] /soc/pcie@11300000: Fixed dependency cycle(s) with /soc/pcie@11300000/interrupt-controller
[ 0.019269] /soc/pcie@11310000: Fixed dependency cycle(s) with /soc/pcie@11310000/interrupt-controller
[ 0.025508] HugeTLB: registered 1.00 GiB page size, pre-allocated 0 pages
[ 0.025518] HugeTLB: 0 KiB vmemmap can be freed for a 1.00 GiB page
[ 0.025525] HugeTLB: registered 32.0 MiB page size, pre-allocated 0 pages
[ 0.025529] HugeTLB: 0 KiB vmemmap can be freed for a 32.0 MiB page
[ 0.025534] HugeTLB: registered 2.00 MiB page size, pre-allocated 0 pages
[ 0.025538] HugeTLB: 0 KiB vmemmap can be freed for a 2.00 MiB page
[ 0.025543] HugeTLB: registered 64.0 KiB page size, pre-allocated 0 pages
[ 0.025547] HugeTLB: 0 KiB vmemmap can be freed for a 64.0 KiB page
[ 0.030073] cryptd: max_cpu_qlen set to 1000
[ 0.031113] SCSI subsystem initialized
[ 0.031204] libata version 3.00 loaded.
[ 0.032310] clocksource: Switched to clocksource arch_sys_counter
[ 0.034133] NET: Registered PF_INET protocol family
[ 0.034276] IP idents hash table entries: 65536 (order: 7, 524288 bytes, linear)
[ 0.053758] tcp_listen_portaddr_hash hash table entries: 2048 (order: 3, 32768 bytes, linear)
[ 0.053798] Table-perturb hash table entries: 65536 (order: 6, 262144 bytes, linear)
[ 0.053810] TCP established hash table entries: 32768 (order: 6, 262144 bytes, linear)
[ 0.053920] TCP bind hash table entries: 32768 (order: 8, 1048576 bytes, linear)
[ 0.054337] TCP: Hash tables configured (established 32768 bind 32768)
[ 0.054647] MPTCP token hash table entries: 4096 (order: 5, 98304 bytes, linear)
[ 0.054784] UDP hash table entries: 2048 (order: 4, 65536 bytes, linear)
[ 0.054837] UDP-Lite hash table entries: 2048 (order: 4, 65536 bytes, linear)
[ 0.055047] NET: Registered PF_UNIX/PF_LOCAL protocol family
[ 0.055079] NET: Registered PF_XDP protocol family
[ 0.055092] PCI: CLS 0 bytes, default 64
[ 0.056935] workingset: timestamp_bits=46 max_order=20 bucket_order=0
[ 0.060480] squashfs: version 4.0 (2009/01/31) Phillip Lougher
[ 0.060487] jffs2: version 2.2 (NAND) (SUMMARY) (LZMA) (RTIME) (CMODE_PRIORITY) (c) 2001-2006 Red Hat, Inc.
[ 0.091171] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 250)
[ 0.092566] mtk-xsphy soc:xs-phy@11e10000: failed to get ref_clk(id-1)
[ 0.093186] mtk-pcie-gen3 11280000.pcie: host bridge /soc/pcie@11280000 ranges:
[ 0.093202] mtk-pcie-gen3 11280000.pcie: Parsing ranges property...
[ 0.093216] mtk-pcie-gen3 11280000.pcie: IO 0x0020000000..0x00201fffff -> 0x0020000000
[ 0.093230] mtk-pcie-gen3 11280000.pcie: MEM 0x0020200000..0x0027ffffff -> 0x0020200000
[ 0.093326] mtk-pcie-gen3 11290000.pcie: host bridge /soc/pcie@11290000 ranges:
[ 0.093337] mtk-pcie-gen3 11290000.pcie: Parsing ranges property...
[ 0.093347] mtk-pcie-gen3 11290000.pcie: IO 0x0028000000..0x00281fffff -> 0x0028000000
[ 0.093357] mtk-pcie-gen3 11290000.pcie: MEM 0x0028200000..0x002fffffff -> 0x0028200000
[ 0.093375] /soc/pcie@11290000: Failed to get clk index: 0 ret: -517
[ 0.093384] mtk-pcie-gen3 11290000.pcie: failed to get clocks
[ 0.093447] mtk-pcie-gen3 11300000.pcie: host bridge /soc/pcie@11300000 ranges:
[ 0.093457] mtk-pcie-gen3 11300000.pcie: Parsing ranges property...
[ 0.093467] mtk-pcie-gen3 11300000.pcie: IO 0x0030000000..0x00301fffff -> 0x0030000000
[ 0.093477] mtk-pcie-gen3 11300000.pcie: MEM 0x0030200000..0x0037ffffff -> 0x0030200000
[ 0.093494] /soc/pcie@11300000: Failed to get clk index: 0 ret: -517
[ 0.093502] mtk-pcie-gen3 11300000.pcie: failed to get clocks
[ 0.093577] mtk-pcie-gen3 11310000.pcie: host bridge /soc/pcie@11310000 ranges:
[ 0.093587] mtk-pcie-gen3 11310000.pcie: Parsing ranges property...
[ 0.093597] mtk-pcie-gen3 11310000.pcie: IO 0x0038000000..0x00381fffff -> 0x0038000000
[ 0.093606] mtk-pcie-gen3 11310000.pcie: MEM 0x0038200000..0x003fffffff -> 0x0038200000
[ 0.093628] /soc/pcie@11310000: Failed to get clk index: 0 ret: -517
[ 0.093637] mtk-pcie-gen3 11310000.pcie: failed to get clocks
[ 0.098219] Serial: 8250/16550 driver, 16 ports, IRQ sharing enabled
[ 0.100244] printk: legacy console [ttyS0] disabled
[ 0.120528] 11000000.serial: ttyS0 at MMIO 0x11000000 (irq = 99, base_baud = 2500000) is a ST16650V2
[ 0.120564] printk: legacy console [ttyS0] enabled
[ 1.234072] random: crng init done
[ 1.238972] loop: module loaded
[ 1.243539] spi-nand spi0.0: Winbond SPI NAND was found.
[ 1.248857] spi-nand spi0.0: 128 MiB, block size: 128 KiB, page size: 2048, OOB size: 64
[ 1.257081] 2 fixed-partitions partitions found on MTD device spi0.0
[ 1.263580] Creating 2 MTD partitions on "spi0.0":
[ 1.268362] 0x000000000000-0x000000200000 : "bl2"
[ 1.274630] 0x000000200000-0x000008000000 : "ubi"
[ 1.346758] ubi0: default fastmap pool size: 50
[ 1.351285] ubi0: default fastmap WL pool size: 25
[ 1.356073] ubi0: attaching mtd1
[ 1.787624] ubi0: scanning is finished
[ 1.796015] ubi0: attached mtd1 (name "ubi", size 126 MiB)
[ 1.801499] ubi0: PEB size: 131072 bytes (128 KiB), LEB size: 126976 bytes
[ 1.808368] ubi0: min./max. I/O unit sizes: 2048/2048, sub-page size 2048
[ 1.815146] ubi0: VID header offset: 2048 (aligned 2048), data offset: 4096
[ 1.822094] ubi0: good PEBs: 1008, bad PEBs: 0, corrupted PEBs: 0
[ 1.828180] ubi0: user volume: 3, internal volumes: 1, max. volumes count: 128
[ 1.835391] ubi0: max/mean erase counter: 4/0, WL threshold: 4096, image sequence number: 1717567889
[ 1.844511] ubi0: available PEBs: 105, total reserved PEBs: 903, PEBs reserved for bad PEB handling: 20
[ 1.853895] ubi0: background thread "ubi_bgt0d" started, PID 293
[ 1.860346] block ubiblock0_1: created from ubi0:1(rootfs)
[ 1.865839] ubiblock: device ubiblock0_1 (rootfs) set to be root filesystem
[ 1.993813] i2c_dev: i2c /dev entries driver
[ 1.998523] /soc/i2c@11003000/rt5190a@64: Fixed dependency cycle(s) with /soc/i2c@11003000/rt5190a@64/regulators/buck1
[ 2.010290] mtk-lvts-thermal 1100a000.lvts: golden temp=60
[ 2.017238] mtk-wdt 1001c000.watchdog: Watchdog enabled (timeout=31 sec, nowayout=0)
[ 2.027119] mtk-msdc 11230000.mmc: Got CD GPIO
[ 2.032667] hw perfevents: enabled with armv8_cortex_a73 PMU driver, 7 (0,8000003f) counters available
[ 2.042523] NET: Registered PF_INET6 protocol family
[ 2.047884] Segment Routing with IPv6
[ 2.051552] In-situ OAM (IOAM) with IPv6
[ 2.055546] NET: Registered PF_PACKET protocol family
[ 2.055594] mtk-msdc 11230000.mmc: msdc_track_cmd_data: cmd=52 arg=00000C00; host->error=0x00000002
[ 2.060598] bridge: filtering via arp/ip/ip6tables is no longer available by default. Update your scripts to load br_netfilter if you need this.
[ 2.070165] mtk-msdc 11230000.mmc: msdc_track_cmd_data: cmd=52 arg=80000C08; host->error=0x00000002
[ 2.091701] 8021q: 802.1Q VLAN Support v1.8
[ 2.096684] mtk-msdc 11230000.mmc: msdc_track_cmd_data: cmd=5 arg=00000000; host->error=0x00000002
[ 2.106246] mtk-msdc 11230000.mmc: msdc_track_cmd_data: cmd=5 arg=00000000; host->error=0x00000002
[ 2.108343] phy phy-soc:xs-phy@11e10000.3: type_sw - reg 0x194, index 0
[ 2.115765] mtk-msdc 11230000.mmc: msdc_track_cmd_data: cmd=5 arg=00000000; host->error=0x00000002
[ 2.122493] mtk-pcie-gen3 11280000.pcie: host bridge /soc/pcie@11280000 ranges:
[ 2.131313] mtk-msdc 11230000.mmc: msdc_track_cmd_data: cmd=5 arg=00000000; host->error=0x00000002
[ 2.138071] mtk-pcie-gen3 11280000.pcie: Parsing ranges property...
[ 2.153273] mtk-pcie-gen3 11280000.pcie: IO 0x0020000000..0x00201fffff -> 0x0020000000
[ 2.161705] mtk-pcie-gen3 11280000.pcie: MEM 0x0020200000..0x0027ffffff -> 0x0020200000
[ 2.181313] mmc0: host does not support reading read-only switch, assuming write-enable
[ 2.192553] mmc0: new high speed SDHC card at address aaaa
[ 2.198612] mmcblk0: mmc0:aaaa SH32G 29.7 GiB
[ 2.206460] Alternate GPT is invalid, using primary GPT.
[ 2.211787] mmcblk0: p1 p2 p3 p4 p5 p6 p7
[ 2.421011] mtk-pcie-gen3 11280000.pcie: set IO trans window[0]: cpu_addr = 0x20000000, pci_addr = 0x20000000, size = 0x200000
[ 2.432407] mtk-pcie-gen3 11280000.pcie: set MEM trans window[1]: cpu_addr = 0x20200000, pci_addr = 0x20200000, size = 0x200000
[ 2.443874] mtk-pcie-gen3 11280000.pcie: set MEM trans window[2]: cpu_addr = 0x20400000, pci_addr = 0x20400000, size = 0x400000
[ 2.455342] mtk-pcie-gen3 11280000.pcie: set MEM trans window[3]: cpu_addr = 0x20800000, pci_addr = 0x20800000, size = 0x800000
[ 2.466809] mtk-pcie-gen3 11280000.pcie: set MEM trans window[4]: cpu_addr = 0x21000000, pci_addr = 0x21000000, size = 0x1000000
[ 2.478360] mtk-pcie-gen3 11280000.pcie: set MEM trans window[5]: cpu_addr = 0x22000000, pci_addr = 0x22000000, size = 0x2000000
[ 2.489911] mtk-pcie-gen3 11280000.pcie: set MEM trans window[6]: cpu_addr = 0x24000000, pci_addr = 0x24000000, size = 0x4000000
[ 2.501727] mtk-pcie-gen3 11280000.pcie: PCI host bridge to bus 0003:00
[ 2.508342] pci_bus 0003:00: root bus resource [bus 00-ff]
[ 2.513825] pci_bus 0003:00: root bus resource [io 0x0000-0x1fffff] (bus address [0x20000000-0x201fffff])
[ 2.523467] pci_bus 0003:00: root bus resource [mem 0x20200000-0x27ffffff]
[ 2.530330] pci_bus 0003:00: scanning bus
[ 2.534359] pci 0003:00:00.0: [14c3:7988] type 01 class 0x060400 PCIe Root Port
[ 2.541668] pci 0003:00:00.0: BAR 0 [mem 0x00000000-0x00007fff 64bit]
[ 2.548106] pci 0003:00:00.0: PCI bridge to [bus 00]
[ 2.553067] pci 0003:00:00.0: bridge window [io 0x0000-0x0fff]
[ 2.559150] pci 0003:00:00.0: bridge window [mem 0x00000000-0x000fffff]
[ 2.565940] pci 0003:00:00.0: bridge window [mem 0x00000000-0x000fffff 64bit pref]
[ 2.573728] pci 0003:00:00.0: PME# supported from D0 D3hot D3cold
[ 2.579813] pci 0003:00:00.0: PME# disabled
[ 2.585147] pci_bus 0003:00: fixups for bus
[ 2.589322] pci 0003:00:00.0: scanning [bus 00-00] behind bridge, pass 0
[ 2.596017] pci 0003:00:00.0: bridge configuration invalid ([bus 00-00]), reconfiguring
[ 2.604015] pci 0003:00:00.0: scanning [bus 00-00] behind bridge, pass 1
[ 2.610749] pci_bus 0003:01: scanning bus
[ 2.614778] pci 0003:01:00.0: [17cb:0309] type 00 class 0xff0000 PCIe Endpoint
[ 2.622007] pci 0003:01:00.0: BAR 0 [mem 0x00000000-0x00000fff 64bit]
[ 2.628452] pci 0003:01:00.0: BAR 2 [mem 0x00000000-0x00000fff 64bit]
[ 2.635039] pci 0003:01:00.0: PME# supported from D0 D3hot D3cold
[ 2.641123] pci 0003:01:00.0: PME# disabled
[ 2.645337] pci 0003:01:00.0: 7.876 Gb/s available PCIe bandwidth, limited by 8.0 GT/s PCIe x1 link at 0003:00:00.0 (capable of 31.506 Gb/s with 16.0 GT/s PCIe x2 link)
[ 2.672346] pci_bus 0003:01: fixups for bus
[ 2.676521] pci_bus 0003:01: bus scan returning with max=01
[ 2.682083] pci_bus 0003:01: busn_res: [bus 01-ff] end is updated to 01
[ 2.688696] pci_bus 0003:00: bus scan returning with max=01
[ 2.694273] pci 0003:00:00.0: bridge window [mem 0x20200000-0x202fffff]: assigned
[ 2.701745] pci 0003:00:00.0: BAR 0 [mem 0x20300000-0x20307fff 64bit]: assigned
[ 2.709052] pci 0003:01:00.0: BAR 0 [mem 0x20200000-0x20200fff 64bit]: assigned
[ 2.716364] pci 0003:01:00.0: BAR 2 [mem 0x20201000-0x20201fff 64bit]: assigned
[ 2.723673] pci 0003:00:00.0: PCI bridge to [bus 01]
[ 2.728629] pci 0003:00:00.0: bridge window [mem 0x20200000-0x202fffff]
[ 2.735411] pci_bus 0003:00: resource 4 [io 0x0000-0x1fffff]
[ 2.741145] pci_bus 0003:00: resource 5 [mem 0x20200000-0x27ffffff]
[ 2.747404] pci_bus 0003:01: resource 1 [mem 0x20200000-0x202fffff]
[ 2.753669] pci 0003:00:00.0: Max Payload Size set to 256/ 256 (was 128), Max Read Rq 256
[ 2.762108] pci 0003:01:00.0: Max Payload Size set to 256/ 256 (was 128), Max Read Rq 256
[ 2.770625] pcieport 0003:00:00.0: assign IRQ: got 115
[ 2.775762] pcieport 0003:00:00.0: enabling device (0000 -> 0002)
[ 2.781852] pcieport 0003:00:00.0: enabling bus mastering
[ 2.787623] mtk-pcie-gen3 11280000.pcie: msi#0x0 address_hi 0x0 address_lo 0x11280c00 data 0
[ 2.796062] mtk-pcie-gen3 11280000.pcie: msi#0x1 address_hi 0x0 address_lo 0x11280c00 data 1
[ 2.804490] mtk-pcie-gen3 11280000.pcie: msi#0x2 address_hi 0x0 address_lo 0x11280c00 data 2
[ 2.812918] mtk-pcie-gen3 11280000.pcie: msi#0x3 address_hi 0x0 address_lo 0x11280c00 data 3
[ 2.821343] mtk-pcie-gen3 11280000.pcie: msi#0x4 address_hi 0x0 address_lo 0x11280c00 data 4
[ 2.829770] mtk-pcie-gen3 11280000.pcie: msi#0x5 address_hi 0x0 address_lo 0x11280c00 data 5
[ 2.838199] mtk-pcie-gen3 11280000.pcie: msi#0x6 address_hi 0x0 address_lo 0x11280c00 data 6
[ 2.846627] mtk-pcie-gen3 11280000.pcie: msi#0x7 address_hi 0x0 address_lo 0x11280c00 data 7
[ 2.855054] mtk-pcie-gen3 11280000.pcie: msi#0x8 address_hi 0x0 address_lo 0x11280c00 data 8
[ 2.863480] mtk-pcie-gen3 11280000.pcie: msi#0x9 address_hi 0x0 address_lo 0x11280c00 data 9
[ 2.871905] mtk-pcie-gen3 11280000.pcie: msi#0xa address_hi 0x0 address_lo 0x11280c00 data 10
[ 2.880418] mtk-pcie-gen3 11280000.pcie: msi#0xb address_hi 0x0 address_lo 0x11280c00 data 11
[ 2.888932] mtk-pcie-gen3 11280000.pcie: msi#0xc address_hi 0x0 address_lo 0x11280c00 data 12
[ 2.897445] mtk-pcie-gen3 11280000.pcie: msi#0xd address_hi 0x0 address_lo 0x11280c00 data 13
[ 2.905959] mtk-pcie-gen3 11280000.pcie: msi#0xe address_hi 0x0 address_lo 0x11280c00 data 14
[ 2.914472] mtk-pcie-gen3 11280000.pcie: msi#0xf address_hi 0x0 address_lo 0x11280c00 data 15
[ 2.922985] mtk-pcie-gen3 11280000.pcie: msi#0x10 address_hi 0x0 address_lo 0x11280c00 data 16
[ 2.931583] mtk-pcie-gen3 11280000.pcie: msi#0x11 address_hi 0x0 address_lo 0x11280c00 data 17
[ 2.940183] mtk-pcie-gen3 11280000.pcie: msi#0x12 address_hi 0x0 address_lo 0x11280c00 data 18
[ 2.948782] mtk-pcie-gen3 11280000.pcie: msi#0x13 address_hi 0x0 address_lo 0x11280c00 data 19
[ 2.957385] mtk-pcie-gen3 11280000.pcie: msi#0x14 address_hi 0x0 address_lo 0x11280c00 data 20
[ 2.965985] mtk-pcie-gen3 11280000.pcie: msi#0x15 address_hi 0x0 address_lo 0x11280c00 data 21
[ 2.974585] mtk-pcie-gen3 11280000.pcie: msi#0x16 address_hi 0x0 address_lo 0x11280c00 data 22
[ 2.983186] mtk-pcie-gen3 11280000.pcie: msi#0x17 address_hi 0x0 address_lo 0x11280c00 data 23
[ 2.991783] mtk-pcie-gen3 11280000.pcie: msi#0x18 address_hi 0x0 address_lo 0x11280c00 data 24
[ 3.000383] mtk-pcie-gen3 11280000.pcie: msi#0x19 address_hi 0x0 address_lo 0x11280c00 data 25
[ 3.008984] mtk-pcie-gen3 11280000.pcie: msi#0x1a address_hi 0x0 address_lo 0x11280c00 data 26
[ 3.017584] mtk-pcie-gen3 11280000.pcie: msi#0x1b address_hi 0x0 address_lo 0x11280c00 data 27
[ 3.026185] mtk-pcie-gen3 11280000.pcie: msi#0x1c address_hi 0x0 address_lo 0x11280c00 data 28
[ 3.034789] mtk-pcie-gen3 11280000.pcie: msi#0x1d address_hi 0x0 address_lo 0x11280c00 data 29
[ 3.043390] mtk-pcie-gen3 11280000.pcie: msi#0x1e address_hi 0x0 address_lo 0x11280c00 data 30
[ 3.051988] mtk-pcie-gen3 11280000.pcie: msi#0x1f address_hi 0x0 address_lo 0x11280c00 data 31
[ 3.060995] mtk-pcie-gen3 11280000.pcie: msi#0x0 address_hi 0x0 address_lo 0x11280c00 data 0
[ 3.069494] pcieport 0003:00:00.0: PME: Signaling with IRQ 116
[ 3.075436] pcieport 0003:00:00.0: AER: enabled with IRQ 116
[ 3.081126] pcieport 0003:00:00.0: save config 0x00: 0x798814c3
[ 3.087046] pcieport 0003:00:00.0: save config 0x04: 0x00100406
[ 3.092959] pcieport 0003:00:00.0: save config 0x08: 0x06040001
[ 3.098868] pcieport 0003:00:00.0: save config 0x0c: 0x00010000
[ 3.104779] pcieport 0003:00:00.0: save config 0x10: 0x20300004
[ 3.110687] pcieport 0003:00:00.0: save config 0x14: 0x00000000
[ 3.116600] pcieport 0003:00:00.0: save config 0x18: 0x00010100
[ 3.122511] pcieport 0003:00:00.0: save config 0x1c: 0x000001f1
[ 3.128418] pcieport 0003:00:00.0: save config 0x20: 0x20202020
[ 3.134331] pcieport 0003:00:00.0: save config 0x24: 0x0001fff1
[ 3.140240] pcieport 0003:00:00.0: save config 0x28: 0x00000000
[ 3.146151] pcieport 0003:00:00.0: save config 0x2c: 0x00000000
[ 3.152059] pcieport 0003:00:00.0: save config 0x30: 0x00000000
[ 3.157971] pcieport 0003:00:00.0: save config 0x34: 0x00000080
[ 3.163883] pcieport 0003:00:00.0: save config 0x38: 0x00000000
[ 3.169791] pcieport 0003:00:00.0: save config 0x3c: 0x00020173
[ 3.175994] mtk-pcie-gen3 11290000.pcie: host bridge /soc/pcie@11290000 ranges:
[ 3.183306] mtk-pcie-gen3 11290000.pcie: Parsing ranges property...
[ 3.189570] mtk-pcie-gen3 11290000.pcie: IO 0x0028000000..0x00281fffff -> 0x0028000000
[ 3.198005] mtk-pcie-gen3 11290000.pcie: MEM 0x0028200000..0x002fffffff -> 0x0028200000
[ 3.522321] mtk-pcie-gen3 11290000.pcie: PCIe link down, current LTSSM state: detect.quiet (0x1)
[ 3.531106] mtk-pcie-gen3 11290000.pcie: probe with driver mtk-pcie-gen3 failed with error -110
[ 3.540027] mtk-pcie-gen3 11300000.pcie: host bridge /soc/pcie@11300000 ranges:
[ 3.547338] mtk-pcie-gen3 11300000.pcie: Parsing ranges property...
[ 3.553603] mtk-pcie-gen3 11300000.pcie: IO 0x0030000000..0x00301fffff -> 0x0030000000
[ 3.562032] mtk-pcie-gen3 11300000.pcie: MEM 0x0030200000..0x0037ffffff -> 0x0030200000
[ 3.882328] mtk-pcie-gen3 11300000.pcie: PCIe link down, current LTSSM state: detect.quiet (0x1)
[ 3.891106] mtk-pcie-gen3 11300000.pcie: probe with driver mtk-pcie-gen3 failed with error -110
[ 3.899969] mtk-pcie-gen3 11310000.pcie: host bridge /soc/pcie@11310000 ranges:
[ 3.907278] mtk-pcie-gen3 11310000.pcie: Parsing ranges property...
[ 3.913542] mtk-pcie-gen3 11310000.pcie: IO 0x0038000000..0x00381fffff -> 0x0038000000
[ 3.921970] mtk-pcie-gen3 11310000.pcie: MEM 0x0038200000..0x003fffffff -> 0x0038200000
[ 4.242316] mtk-pcie-gen3 11310000.pcie: PCIe link down, current LTSSM state: detect.quiet (0x1)
[ 4.251093] mtk-pcie-gen3 11310000.pcie: probe with driver mtk-pcie-gen3 failed with error -110
[ 4.260658] FIT: Detected U-Boot 2025.10-Kwrt-r32502-27b48d0002
[ 4.266578] FIT: Selected configuration: "config-mt7988a-bananapi-bpi-r4" (OpenWrt bananapi_bpi-r4)
[ 4.275622] FIT: kernel sub-image 0x00001000..0x007f81d7 "kernel-1" (ARM64 OpenWrt Linux-6.12.66)
[ 4.285447] FIT: flat_dt sub-image 0x007f9000..0x00803bc7 "fdt-1" (ARM64 OpenWrt bananapi_bpi-r4 device tree blob)
[ 4.296659] FIT: flat_dt sub-image 0x00804000..0x008045fd "fdt-mt7988a-bananapi-bpi-r4-emmc" (ARM64 OpenWrt bananapi_bpi-r4 device tree overlay mt7988a-bananapi-bpi-r4-emmc)
[ 4.312995] FIT: flat_dt sub-image 0x00805000..0x0080511c "fdt-mt7988a-bananapi-bpi-r4-rtc" (ARM64 OpenWrt bananapi_bpi-r4 device tree overlay mt7988a-bananapi-bpi-r4-rtc)
[ 4.329152] FIT: flat_dt sub-image 0x00806000..0x008065b5 "fdt-mt7988a-bananapi-bpi-r4-sd" (ARM64 OpenWrt bananapi_bpi-r4 device tree overlay mt7988a-bananapi-bpi-r4-sd)
[ 4.345135] FIT: filesystem sub-image 0x00807000..0x0432bfff "rootfs-1" (ARM64 OpenWrt bananapi_bpi-r4 rootfs)
[ 4.355965] block mmcblk0p7: mapped 1 uImage.FIT filesystem sub-image as /dev/fit0
[ 4.363698] block mmcblk0p7: mapped remaining space as /dev/fitrw
[ 4.483776] mtk_soc_eth 15100000.ethernet: generated random MAC address 20:08:02:00:00:00
[ 4.496970] mtk_soc_eth 15100000.ethernet eth0: mediatek frame engine at 0xffffffc082f80000, irq 105
[ 4.506615] mtk_soc_eth 15100000.ethernet eth1: mediatek frame engine at 0xffffffc082f80000, irq 105
[ 4.516244] mtk_soc_eth 15100000.ethernet eth2: mediatek frame engine at 0xffffffc082f80000, irq 105
[ 4.609799] mt7530-mmio 15020000.switch: configuring for fixed/internal link mode
[ 4.617320] mt7530-mmio 15020000.switch: Link is Up - 10Gbps/Full - flow control rx/tx
[ 4.644584] mt7530-mmio 15020000.switch wan (uninitialized): PHY [mt7530-0:00] driver [MediaTek MT7988 PHY] (irq=118)
[ 4.683374] mt7530-mmio 15020000.switch lan1 (uninitialized): PHY [mt7530-0:01] driver [MediaTek MT7988 PHY] (irq=119)
[ 4.722080] mt7530-mmio 15020000.switch lan2 (uninitialized): PHY [mt7530-0:02] driver [MediaTek MT7988 PHY] (irq=120)
[ 4.760807] mt7530-mmio 15020000.switch lan3 (uninitialized): PHY [mt7530-0:03] driver [MediaTek MT7988 PHY] (irq=121)
[ 4.771772] mtk_soc_eth 15100000.ethernet eth0: entered promiscuous mode
[ 4.778484] DSA: tree 0 setup
[ 4.796675] clk: Disabling unused clocks
[ 4.801026] PM: genpd: Disabling unused power domains
[ 4.812194] VFS: Mounted root (squashfs filesystem) readonly on device 259:0.
[ 4.819472] Freeing unused kernel memory: 576K
[ 4.823955] Run /sbin/init as init process
[ 4.828043] with arguments:
[ 4.830998] /sbin/init
[ 4.833701] with environment:
[ 4.836830] HOME=/
[ 4.839179] TERM=linux
[ 4.977089] init: Console is alive
[ 4.980579] init: - watchdog -
[ 5.597819] kmodloader: loading kernel modules from /etc/modules-boot.d/*
[ 5.623066] usbcore: registered new interface driver usbfs
[ 5.628577] usbcore: registered new interface driver hub
[ 5.633939] usbcore: registered new device driver usb
[ 5.640272] raid6: skipped pq benchmark and selected neonx8
[ 5.645869] raid6: using neon recovery algorithm
[ 5.651212] xor: measuring software checksum speed
[ 5.656570] 8regs : 6152 MB/sec
[ 5.661449] 32regs : 6173 MB/sec
[ 5.666442] arm64_neon : 5093 MB/sec
[ 5.670787] xor: using function: 32regs (6173 MB/sec)
[ 5.797436] Btrfs loaded, zoned=no, fsverity=no
[ 5.805945] gpio_button_hotplug: loading out-of-tree module taints kernel.
[ 5.822808] xhci-mtk 11200000.usb: supply vbus not found, using dummy regulator
[ 5.830201] xhci-mtk 11200000.usb: supply vusb33 not found, using dummy regulator
[ 5.838101] xhci-mtk 11200000.usb: xHCI Host Controller
[ 5.843359] xhci-mtk 11200000.usb: new USB bus registered, assigned bus number 1
[ 5.853801] xhci-mtk 11200000.usb: hcc params 0x01403f99 hci version 0x110 quirks 0x0000000000200010
[ 5.862955] xhci-mtk 11200000.usb: irq 122, io mem 0x11200000
[ 5.868746] xhci-mtk 11200000.usb: xHCI Host Controller
[ 5.873988] xhci-mtk 11200000.usb: new USB bus registered, assigned bus number 2
[ 5.881372] xhci-mtk 11200000.usb: Host supports USB 3.2 Enhanced SuperSpeed
[ 5.888656] hub 1-0:1.0: USB hub found
[ 5.892418] hub 1-0:1.0: 1 port detected
[ 5.896490] usb usb2: We don't know the algorithms for LPM for this host, disabling LPM.
[ 5.904885] hub 2-0:1.0: USB hub found
[ 5.908636] hub 2-0:1.0: 1 port detected
[ 5.917357] usbcore: registered new interface driver usb-storage
[ 5.924301] usbcore: registered new interface driver uas
[ 5.929774] kmodloader: done loading kernel modules from /etc/modules-boot.d/*
[ 5.940444] init: - preinit -
[ 6.282461] usb 2-1: new SuperSpeed USB device number 2 using xhci-mtk
[ 6.302483] mtk_soc_eth 15100000.ethernet sfp-lan: renamed from eth1
[ 6.311704] mtk_soc_eth 15100000.ethernet sfp-wan: renamed from eth2
[ 6.322459] hub 2-1:1.0: USB hub found
[ 6.326342] hub 2-1:1.0: 4 ports detected
[ 6.334859] mtk_soc_eth 15100000.ethernet eth0: configuring for fixed/internal link mode
[ 6.343004] mtk_soc_eth 15100000.ethernet eth0: Link is Up - 10Gbps/Full - flow control rx/tx
[ 6.361580] mt7530-mmio 15020000.switch lan1: configuring for phy/internal link mode
[ 6.370844] mt7530-mmio 15020000.switch lan1: Link is Up - 1Gbps/Full - flow control rx/tx
[ 6.442331] usb 1-1: new high-speed USB device number 2 using xhci-mtk
[ 6.594737] hub 1-1:1.0: USB hub found
[ 6.598608] hub 1-1:1.0: 5 ports detected
[ 7.272310] usb 1-1.5: new high-speed USB device number 3 using xhci-mtk
[ 10.730765] Scanning for Btrfs filesystems
[ 11.090602] mount_root: loading kmods from internal overlay
[ 11.107644] kmodloader: loading kernel modules from //etc/modules-boot.d/*
[ 11.117453] kmodloader: done loading kernel modules from //etc/modules-boot.d/*
[ 11.355509] block: attempting to load /tmp/overlay/upper/etc/config/fstab
[ 11.364964] block: unable to load configuration (fstab: Entry not found)
[ 11.371692] block: attempting to load /tmp/overlay/etc/config/fstab
[ 11.378017] block: unable to load configuration (fstab: Entry not found)
[ 11.385022] block: attempting to load /etc/config/fstab
[ 11.392464] block: unable to load configuration (fstab: Entry not found)
[ 11.399187] block: no usable configuration
[ 11.405186] UBIFS (ubi0:2): Mounting in unauthenticated mode
[ 11.410904] UBIFS (ubi0:2): background thread "ubifs_bgt0_2" started, PID 1012
[ 11.453364] UBIFS (ubi0:2): UBIFS: mounted UBI device 0, volume 2, name "rootfs_data"
[ 11.461189] UBIFS (ubi0:2): LEB size: 126976 bytes (124 KiB), min./max. I/O unit sizes: 2048 bytes/2048 bytes
[ 11.471098] UBIFS (ubi0:2): FS size: 43298816 bytes (41 MiB, 341 LEBs), max 351 LEBs, journal size 2158592 bytes (2 MiB, 17 LEBs)
[ 11.482740] UBIFS (ubi0:2): reserved for root: 2045109 bytes (1997 KiB)
[ 11.489343] UBIFS (ubi0:2): media format: w5/r0 (latest is w5/r0), UUID E388AFC5-8DEF-4591-A0D7-460E2B0FF5B5, small LPT model
[ 11.501669] block: attempting to load /tmp/ubifs_cfg/upper/etc/config/fstab
[ 11.512106] block: extroot: not configured
[ 11.518617] UBIFS (ubi0:2): un-mount UBI device 0
[ 11.523337] UBIFS (ubi0:2): background thread "ubifs_bgt0_2" stops
[ 11.811898] F2FS-fs (fitrw): Mounted with checkpoint version = 3999c557
[ 11.820218] mount_root: loading kmods from internal overlay
[ 11.933813] kmodloader: loading kernel modules from /tmp/overlay/upper/etc/modules-boot.d/*
[ 11.954228] kmodloader: done loading kernel modules from /tmp/overlay/upper/etc/modules-boot.d/*
[ 12.123079] block: attempting to load /tmp/overlay/upper/etc/config/fstab
[ 12.131214] block: extroot: not configured
[ 12.137091] UBIFS (ubi0:2): Mounting in unauthenticated mode
[ 12.142926] UBIFS (ubi0:2): background thread "ubifs_bgt0_2" started, PID 1032
[ 12.184754] UBIFS (ubi0:2): UBIFS: mounted UBI device 0, volume 2, name "rootfs_data"
[ 12.192584] UBIFS (ubi0:2): LEB size: 126976 bytes (124 KiB), min./max. I/O unit sizes: 2048 bytes/2048 bytes
[ 12.202489] UBIFS (ubi0:2): FS size: 43298816 bytes (41 MiB, 341 LEBs), max 351 LEBs, journal size 2158592 bytes (2 MiB, 17 LEBs)
[ 12.214130] UBIFS (ubi0:2): reserved for root: 2045109 bytes (1997 KiB)
[ 12.220733] UBIFS (ubi0:2): media format: w5/r0 (latest is w5/r0), UUID E388AFC5-8DEF-4591-A0D7-460E2B0FF5B5, small LPT model
[ 12.233022] block: attempting to load /tmp/ubifs_cfg/upper/etc/config/fstab
[ 12.243434] block: extroot: not configured
[ 12.249883] UBIFS (ubi0:2): un-mount UBI device 0
[ 12.254593] UBIFS (ubi0:2): background thread "ubifs_bgt0_2" stops
[ 12.263150] mount_root: switching to f2fs overlay
[ 12.270667] overlayfs: null uuid detected in lower fs '/', falling back to xino=off,index=off,nfs_export=off.
[ 12.282175] urandom-seed: Seeding with /etc/urandom.seed
[ 12.310250] mt7530-mmio 15020000.switch lan1: Link is Down
[ 12.318623] procd: - early -
[ 12.321556] procd: - watchdog -
[ 12.858257] procd: - watchdog -
[ 12.861609] procd: - ubus -
[ 13.019457] procd: - init -
[ 13.354794] kmodloader: loading kernel modules from /etc/modules.d/*
[ 13.380529] NET: Registered PF_ALG protocol family
[ 13.392169] zram: Added device: zram0
[ 13.396996] urngd: v1.0.2 started.
[ 13.417459] tun: Universal TUN/TAP device driver, 1.6
[ 13.461748] pca954x 1-0070: supply vdd not found, using dummy regulator
[ 13.469176] i2c i2c-1: Added multiplexed i2c bus 2
[ 13.474241] i2c i2c-1: Added multiplexed i2c bus 3
[ 13.479205] i2c i2c-1: Added multiplexed i2c bus 4
[ 13.484222] i2c i2c-1: Added multiplexed i2c bus 5
[ 13.489026] pca954x 1-0070: registered 4 multiplexed busses for I2C switch pca9545
[ 13.501333] ntfs3: Enabled Linux POSIX ACLs support
[ 13.507648] usbcore: registered new interface driver cdc_wdm
[ 13.521678] usbcore: registered new interface driver qmi_wwan_q
[ 13.529732] crypto-safexcel 15600000.crypto: EIP197:331(7,1,8,4)-HIA:272(2,5,5),PE:151/450(alg:7fe1fc00)/240/240/450
[ 13.541267] crypto-safexcel 15600000.crypto: TRC init: 8704d,48a (32r,128h)
[ 20.751734] /dev/ubiblock0_1: Can't open blockdev
[ 28.118371] mhi_init Quectel_Linux_PCIE_MHI_Driver_V1.3.8
[ 28.124060] mhi_q 0003:01:00.0: assign IRQ: got 0
[ 28.128768] mhi_pci_probe pci_dev->name = 0003:01:00.0, domain=3, bus=1, slot=0, vendor=17CB, device=0309
[ 28.138452] [I][mhi0][mhi_arch_set_bus_request] Setting bus request to index 1
[ 28.145677] mhi_q 0003:01:00.0: BAR 0 [mem 0x20200000-0x20200fff 64bit]: assigned
[ 28.153175] mhi_q 0003:01:00.0: enabling device (0000 -> 0002)
[ 28.159011] mhi_q 0003:01:00.0: enabling bus mastering
[ 28.164258] mtk-pcie-gen3 11280000.pcie: msi#0x4 address_hi 0x0 address_lo 0x11280c00 data 4
[ 28.172700] mtk-pcie-gen3 11280000.pcie: msi#0x5 address_hi 0x0 address_lo 0x11280c00 data 5
[ 28.181125] mtk-pcie-gen3 11280000.pcie: msi#0x6 address_hi 0x0 address_lo 0x11280c00 data 6
[ 28.189555] mtk-pcie-gen3 11280000.pcie: msi#0x7 address_hi 0x0 address_lo 0x11280c00 data 7
[ 28.197999] [I][mhi0][mhi_init_pci_dev] msi_required = 4, msi_allocated = 4, msi_irq = 127
[ 28.206271] [I][mhi0][mhi_power_up] dev_state:SYS_ERR
[ 28.280907] [I][mhi0][mhi_power_up] dev_state:RESET
[ 28.285784] [I][mhi0][mhi_async_power_up] Requested to power on
[ 28.291739] [I][mhi0][mhi_alloc_coherent] size = 98304, dma_handle = 108660000
[ 28.298953] [I][mhi0][mhi_init_dev_ctxt] mhi_ctxt->ctrl_seg = 00000000e7cd4e24
[ 28.306343] [I][mhi0][mhi_async_power_up] dev_state:READY ee:AMSS
[ 28.312461] [I][mhi0][mhi_async_power_up] Power on setup success
[ 28.318471] [I][mhi0][mhi_pci_show_link] LnkCap: Speed 16GT/s, Width x2
[ 28.325080] [I][mhi0][mhi_pci_show_link] LnkSta: Speed 8GT/s, Width x1
[ 28.331594] [I][mhi0][mhi_pci_probe] Return successful
[ 28.336908] [I][mhi0][mhi_pm_st_worker] Transition to state:READY
[ 28.343013] [I][mhi0][mhi_pm_st_worker] INVALID_EE -> AMSS
[ 28.348488] [I][mhi0][mhi_ready_state_transition] Waiting to enter READY state
[ 28.355715] [I][mhi0][mhi_ready_state_transition] Device in READY State
[ 28.362329] [I][mhi0][mhi_tryset_pm_state] Transition to pm state from:POR to:POR
[ 28.369802] [I][mhi0][mhi_init_mmio] Initializing MMIO
[ 28.370288] at24 2-0057: supply vcc not found, using dummy regulator
[ 28.374934] [I][mhi0][mhi_init_mmio] CHDBOFF:0x300
[ 28.374942] [I][mhi0][mhi_init_mmio] ERDBOFF:0x700
[ 28.382212] at24 2-0057: 256 byte 24c02 EEPROM, writable, 1 bytes/write
[ 28.386053] [I][mhi0][mhi_init_mmio] Programming all MMIO values.
[ 28.404936] usbcore: registered new interface driver cdc_acm
[ 28.410598] cdc_acm: USB Abstract Control Model driver for USB modems and ISDN adapters
[ 28.419457] usbcore: registered new interface driver cdc_ether
[ 28.426445] usbcore: registered new interface driver cdc_ncm
[ 28.437088] Loading modules backported from Linux version v6.18-0-g7d0a66e4b
[ 28.444162] Backport generated by backports.git 4d44cef
[ 28.450256] usbcore: registered new interface driver huawei_cdc_ncm
[ 28.479304] usbcore: registered new interface driver qmi_wwan
[ 28.486159] NET: Registered PF_QIPCRTR protocol family
[ 28.493399] usbcore: registered new interface driver rndis_host
[ 28.501869] rtc-pcf8563 2-0051: registered as rtc0
[ 28.507881] rtc-pcf8563 2-0051: setting system clock to 2026-05-05T07:49:27 UTC (1777967367)
[ 28.509545] [I][mhi0][mhi_dump_tre] carl_ev evt_state_change mhistate=2
[ 28.522918] [I][mhi0][mhi_process_ctrl_ev_ring] MHI state change event to state:M0
[ 28.530479] [I][mhi0][mhi_pm_m0_transition] Entered With State:READY PM_STATE:POR
[ 28.537961] [I][mhi0][mhi_tryset_pm_state] Transition to pm state from:POR to:M0
[ 28.538512] sfp sfp1: Host maximum power 3.0W
[ 28.545371] [I][mhi0][mhi_dump_tre] carl_ev evt_ee_state execenv=2
[ 28.550208] sfp sfp2: Host maximum power 3.0W
[ 28.555867] [I][mhi0][mhi_process_ctrl_ev_ring] MHI EE received event:AMSS
[ 28.555913] [I][mhi0][mhi_pm_st_worker] Transition to state:MISSION MODE
[ 28.567527] usbcore: registered new interface driver sierra_net
[ 28.573801] [I][mhi0][mhi_pm_st_worker] INVALID_EE -> AMSS
[ 28.585194] [I][mhi0][mhi_pm_mission_mode_transition] Processing Mission Mode Transition
[ 28.593294] [I][mhi0][mhi_init_timesync] No timesync capability found
[ 28.599726] [I][mhi0][mhi_pm_mission_mode_transition] Adding new devices
[ 28.606745] usbcore: registered new interface driver ums-alauda
[ 28.607095] [I][mhi0][mhi_dtr_probe] Enter for DTR control channel
[ 28.618854] [I][mhi0][__mhi_prepare_channel] Entered: preparing channel:18
[ 28.619192] usbcore: registered new interface driver ums-cypress
[ 28.629471] [I][mhi0][mhi_dump_tre] carl_ev evt_cmd_comp code=1, type=33
[ 28.638597] [I][mhi0][__mhi_prepare_channel] Chan:18 successfully moved to start state
[ 28.638766] usbcore: registered new interface driver ums-datafab
[ 28.646511] [I][mhi0][__mhi_prepare_channel] Entered: preparing channel:19
[ 28.650157] [I][mhi0][mhi_dump_tre] carl_ev evt_cmd_comp code=1, type=33
[ 28.659737] usbcore: registered new interface driver ums-freecom
[ 28.666131] [I][mhi0][__mhi_prepare_channel] Chan:19 successfully moved to start state
[ 28.680024] [I][mhi0][mhi_dtr_probe] Exit with ret:0
[ 28.680316] usbcore: registered new interface driver ums-isd200
[ 28.685326] [I][mhi_netdev_enable_iface] Prepare the channels for transfer
[ 28.697767] [I][mhi0][__mhi_prepare_channel] Entered: preparing channel:100
[ 28.698108] usbcore: registered new interface driver ums-jumpshot
[ 28.711642] usbcore: registered new interface driver ums-karma
[ 28.718579] usbcore: registered new interface driver ums-sddr09
[ 28.725389] usbcore: registered new interface driver ums-sddr55
[ 28.730820] [I][mhi0][mhi_dump_tre] carl_ev evt_cmd_comp code=1, type=33
[ 28.738049] [I][mhi0][__mhi_prepare_channel] Chan:100 successfully moved to start state
[ 28.738361] usbcore: registered new interface driver ums-usbat
[ 28.746047] [I][mhi0][__mhi_prepare_channel] Entered: preparing channel:101
[ 28.759618] usbcore: registered new interface driver usbserial_generic
[ 28.766172] usbserial: USB Serial support registered for generic
[ 28.776947] xt_time: kernel timezone is -0000
[ 28.778021] [I][mhi0][mhi_dump_tre] carl_ev evt_cmd_comp code=1, type=33
[ 28.788100] [I][mhi0][__mhi_prepare_channel] Chan:101 successfully moved to start state
[ 28.788389] usbcore: registered new interface driver cdc_mbim
[ 28.798480] [I][mhi_netdev_enable_iface] Exited.
[ 28.807008] rmnet_vnd_register_device(rmnet_mhi0.1)=0
[ 28.812175] [I][mhi0][mhi_pm_mission_mode_transition] Exit with ret:0
[ 28.994157] PPP generic driver version 2.4.2
[ 28.999422] PPP MPPE Compression module registered
[ 29.005319] NET: Registered PF_PPPOX protocol family
[ 29.014089] wireguard: WireGuard 1.0.0 loaded. See www.wireguard.com for information.
[ 29.021925] wireguard: Copyright (C) 2015-2019 Jason A. Donenfeld Jason@zx2c4.com. All Rights Reserved.
[ 29.032891] usbcore: registered new interface driver option
[ 29.038532] usbserial: USB Serial support registered for GSM modem (1-port)
[ 29.048325] usbcore: registered new interface driver qcserial
[ 29.054203] usbserial: USB Serial support registered for Qualcomm USB modem
[ 29.061377] kmodloader: done loading kernel modules from /etc/modules.d/*
[ 29.113830] [I][mhi0][__mhi_prepare_channel] Entered: preparing channel:32
[ 29.124498] [I][mhi0][mhi_dump_tre] carl_ev evt_cmd_comp code=1, type=33
[ 29.131214] [I][mhi0][__mhi_prepare_channel] Chan:32 successfully moved to start state
[ 29.139146] [I][mhi0][__mhi_prepare_channel] Entered: preparing channel:33
[ 29.149680] [I][mhi0][mhi_dump_tre] carl_ev evt_cmd_comp code=1, type=33
[ 29.156396] [I][mhi0][__mhi_prepare_channel] Chan:33 successfully moved to start state
[ 29.571317] /dev/ubiblock0_1: Can't open blockdev
[ 29.577756] UBIFS (ubi0:2): Mounting in unauthenticated mode
[ 29.577828] UBIFS (ubi0:2): background thread "ubifs_bgt0_2" started, PID 3378
[ 29.619399] UBIFS (ubi0:2): UBIFS: mounted UBI device 0, volume 2, name "rootfs_data"
[ 29.619409] UBIFS (ubi0:2): LEB size: 126976 bytes (124 KiB), min./max. I/O unit sizes: 2048 bytes/2048 bytes
[ 29.619415] UBIFS (ubi0:2): FS size: 43298816 bytes (41 MiB, 341 LEBs), max 351 LEBs, journal size 2158592 bytes (2 MiB, 17 LEBs)
[ 29.619422] UBIFS (ubi0:2): reserved for root: 2045109 bytes (1997 KiB)
[ 29.619427] UBIFS (ubi0:2): media format: w5/r0 (latest is w5/r0), UUID E388AFC5-8DEF-4591-A0D7-460E2B0FF5B5, small LPT model
Hi need dmesg from module, not from the host pc 
You can get it over adb after module has booted
Hello the t99w373 can now run in pcie-rc mode so the usb2 speed is not an issue , if you are interested https://github.com/Brazzo978/T99w373-Research its the work from me 1alessandro1 and stich86