Does WRT3200ACM support WPA3?

If I enable WPA2-PSK/WPA3-SAE mixed mode and go back to APA2-PSK only my wifi stops working. I get
Marvell 88W8964 802.11acn
Channel: 44 (5.220 GHz) | Bitrate: 6 Mbit/s
and the GUI freezes.

If I enable WPA2-PSK/WPA3-SAE mixed mode my Pixel2 shows wrong password, I am not sure what is the correct setting to enable WPA3??

root@router:~# opkg remove wpad-basic
root@router:~# opkg install hostapd-openssl
root@router:~# reboot

1 Like

To my knowledge the mwlwifi wifi driver in WRT3200ACM does not proper support WPA3/WPA2 mixed mode.

See issue in the mwlwifi repo:

The development on mwlwifi is pretty dead, so likely no improvement is coming.


I guess I have to live with WPA2 unless an updated driver comes later on.

Same device: even using WPA3 only does not seem to work completely on 21.02.1 (git-22.025.79177-4ec18ec). Neither iOS 15.4 beta nor macOS Catalina 10.15.7 are able to login if wifi encryption is set to either WPA2/WPA3 mixed or WPA3-only. WPA2 works just fine.