Dlink DAP 1325 A1 - "System running in recovery (initramfs) mode."

Installing and Using OpenWrt
1

Hi, I flashed the Kernel from OpenWrt Firmware Selector on my Dlink DAP 1325.

Do I choose the SYSUPGRADE image next & apply it?

Currently my wifi extender says " System running in recovery (initramfs) mode.

No changes to settings will be stored and are lost after rebooting. This mode should only be used to install a firmware upgrade"

Thanks. just making sure. Didn't want to brick anything.

  • Ember.
2

restart, follow https://git.openwrt.org/?p=openwrt/openwrt.git;a=commit;h=d57ba86e489e363be3b26b9cb880048da5dfd12c

3

Thanks. ^^ It just needs a restart? I was unable to get into the failsafe UI, but it allowed me to flash the kernel image in regular mode.

4

kernel isn't an image you're supposed to flash, it's just for running in memory.

I guess you can try to UL the sysupgrade image, it's the one used when doing the install, it seems.

5

Ah, so I screwed up. Ill try the sys image & report back.

Edit: Everything seems to be working after applying the sysupgrade image.

Thanks for your help! =)

6

This topic was automatically closed 10 days after the last reply. New replies are no longer allowed.