DHCP wrong address

hi everyone,
my setup is raspberrypi4+netgear wax214.
i've connected 2 asix88179 adapter on raspy usb3 ports.
on one of them, i've connected netgear AP, and it work well, on the second port i connected my laptop directly and the DHPC gives me an address out of range (router is and it gives me i keep both adapter in the same bridged interface, why it isn't working?
thanks for help

post your /etc/config/network

here you are

config interface 'loopback'
        option device 'lo'
        option proto 'static'
        option ipaddr ''
        option netmask ''

config globals 'globals'
        option ula_prefix 'fd27:37fe:b435::/48'

config device
        option name 'br-lan'
        option type 'bridge'
        list ports 'eth1'
        list ports 'eth2'

config interface 'lan'
        option device 'br-lan'
        option proto 'static'
        option ipaddr ''

Can you execute "brctl show" and post the output here, please?


bridge name     bridge id               STP enabled     interfaces
br-lan          7fff.207bd2d7dd53       no              eth1


i have feeling that you have another DHCP server somewhere in network
start to turn off your network devices, one by one, and reconnect laptop after each power off


Watch the logs, using "logread -f" and renew the IP address on the laptop.

ok guys i'll solved it.
i simply restart bridged interface and now it's working.. :sweat_smile:
thanks for help!
however i'll open another post with another challengin' question.. :rofl:

This topic was automatically closed 10 days after the last reply. New replies are no longer allowed.