DHCP does not provide IP address

Installing and Using OpenWrt
1

Morning,

Owrt does not provide an IP address after switching to 24.10.2 on a TP-Link C(A)6 EU v2. My devices get an IP address from the upstream router.

I need the IP address from Owrt and cannot work in this config.

Any suggestions?

This is the dhcp file in /etc/config:
root@OpenWrt:~# cat /etc/config/dhcp

config dnsmasq
	option domainneeded '1'
	option boguspriv '1'
	option filterwin2k '0'
	option localise_queries '1'
	option rebind_protection '1'
	option rebind_localhost '1'
	option local '/lan/'
	option domain 'lan'
	option expandhosts '1'
	option nonegcache '0'
	option cachesize '1000'
	option authoritative '1'
	option readethers '1'
	option leasefile '/tmp/dhcp.leases'
	option resolvfile '/tmp/resolv.conf.d/resolv.conf.auto'
	option nonwildcard '1'
	option localservice '1'
	option ednspacket_max '1232'
	option filter_aaaa '0'
	option filter_a '0'

config dhcp 'lan'
	option interface 'lan'
	option start '100'
	option limit '150'
	option leasetime '12h'
	option dhcpv4 'server'
	option dhcpv6 'server'
	option ra 'server'
	list ra_flags 'managed-config'
	list ra_flags 'other-config'

config dhcp 'wan'
	option interface 'wan'
	option ignore '1'
	option start '100'
	option limit '150'
	option leasetime '12h'

config odhcpd 'odhcpd'
	option maindhcp '0'
	option leasefile '/tmp/hosts/odhcpd'
	option leasetrigger '/usr/sbin/odhcpd-update'
	option loglevel '4'

thanks in advance for any thoughts!

best regards
Rob

2

From what version you "switched" ?
Are cables OK? It seems upstream router is connected to LAN switch ipo WAN port?

Please connect to your OpenWrt device using ssh and copy the output of the following commands and post it here using the "Preformatted text </> " button:
grafik
Remember to redact passwords, MAC addresses and any public IP addresses you may have:

ubus call system board
cat /etc/config/network
: cat /etc/config/wireless
cat /etc/config/dhcp
cat /etc/config/firewall