cd38
January 13, 2019, 8:13am
1
Hello, sorry for my approximative English ....
I have installe Openwrt on my Xiaomi Mi WiFi R3G.
When i conecte the rooter wan to my box and a port lan of openwrt to my laptop it's working openwrt has ip 192.168.1.1 (my box 192.168.0.254) my laptop (from the dcp of openwrt) 192.168.1.214 the package adblock works.
But when i'm connecte to my openwrt using wireless (mode acces point network wan) adblock does'nt works and my laptop as an ip from the dhcp of my ispbox 192.168.0.xxx and i can't accès to 192.168.1.1
Have you got an idea ?
Regards
Post your "network", "wireless", and "firewall" config files please.
cd38
January 13, 2019, 3:13pm
3
Thanks for your help
-----------------------------------------------------
OpenWrt 18.06.1, r7258-5eb055306f
-----------------------------------------------------
root@OpenWrt:~# cat /etc/config/network
config interface 'loopback'
option ifname 'lo'
option proto 'static'
option ipaddr '127.0.0.1'
option netmask '255.0.0.0'
config globals 'globals'
option ula_prefix 'fd46:cb88:8a90::/48'
config interface 'lan'
option type 'bridge'
option ifname 'eth0.1'
option proto 'static'
option ipaddr '192.168.1.1'
option netmask '255.255.255.0'
option ip6assign '60'
config device 'lan_dev'
option name 'eth0.1'
option macaddr '50:64:2b:b2:71:cc'
config interface 'wan'
option ifname 'eth0.2'
option proto 'dhcp'
option type 'bridge'
config interface 'wan6'
option ifname 'eth0.2'
option proto 'dhcpv6'
config switch
option name 'switch0'
option reset '1'
option enable_vlan '1'
config switch_vlan
option device 'switch0'
option vlan '1'
option ports '2 3 6t'
config switch_vlan
option device 'switch0'
option vlan '2'
option ports '1 6t'
config interface 'vpnclient'
option ifname 'tun0'
option proto 'none'
root@OpenWrt:~# cat /etc/config/wireless
config wifi-device 'radio0'
option type 'mac80211'
option channel '11'
option hwmode '11g'
option path 'pci0000:00/0000:00:00.0/0000:01:00.0'
option htmode 'HT20'
option country '00'
option legacy_rates '1'
config wifi-device 'radio1'
option type 'mac80211'
option channel '36'
option hwmode '11a'
option path 'pci0000:00/0000:00:01.0/0000:02:00.0'
option htmode 'VHT80'
option country '00'
option legacy_rates '1'
config wifi-iface
option device 'radio0'
option mode 'ap'
option ssid 'OpenWrt'
option encryption 'psk2'
option key 'mypassword'
option network 'wan'
config wifi-iface
option device 'radio1'
option mode 'ap'
option ssid 'OpenWrt'
option encryption 'psk2'
option key 'mypassword'
option network 'wan'
root@OpenWrt:~# cat /etc/config/firewall
config defaults
option syn_flood '1'
option input 'ACCEPT'
option output 'ACCEPT'
option forward 'REJECT'
config zone
option name 'lan'
list network 'lan'
option input 'ACCEPT'
option output 'ACCEPT'
option forward 'ACCEPT'
config zone
option name 'wan'
list network 'wan'
list network 'wan6'
option input 'REJECT'
option output 'ACCEPT'
option forward 'REJECT'
option masq '1'
option mtu_fix '1'
config forwarding
option src 'lan'
option dest 'wan'
config rule
option name 'Allow-DHCP-Renew'
option src 'wan'
option proto 'udp'
option dest_port '68'
option target 'ACCEPT'
option family 'ipv4'
config rule
option name 'Allow-Ping'
option src 'wan'
option proto 'icmp'
option icmp_type 'echo-request'
option family 'ipv4'
option target 'ACCEPT'
config rule
option name 'Allow-IGMP'
option src 'wan'
option proto 'igmp'
option family 'ipv4'
option target 'ACCEPT'
config rule
option name 'Allow-DHCPv6'
option src 'wan'
option proto 'udp'
option src_ip 'fc00::/6'
option dest_ip 'fc00::/6'
option dest_port '546'
option family 'ipv6'
option target 'ACCEPT'
config rule
option name 'Allow-MLD'
option src 'wan'
option proto 'icmp'
option src_ip 'fe80::/10'
list icmp_type '130/0'
list icmp_type '131/0'
list icmp_type '132/0'
list icmp_type '143/0'
option family 'ipv6'
option target 'ACCEPT'
config rule
option name 'Allow-ICMPv6-Input'
option src 'wan'
option proto 'icmp'
list icmp_type 'echo-request'
list icmp_type 'echo-reply'
list icmp_type 'destination-unreachable'
list icmp_type 'packet-too-big'
list icmp_type 'time-exceeded'
list icmp_type 'bad-header'
list icmp_type 'unknown-header-type'
list icmp_type 'router-solicitation'
list icmp_type 'neighbour-solicitation'
list icmp_type 'router-advertisement'
list icmp_type 'neighbour-advertisement'
option limit '1000/sec'
option family 'ipv6'
option target 'ACCEPT'
config rule
option name 'Allow-ICMPv6-Forward'
option src 'wan'
option dest '*'
option proto 'icmp'
list icmp_type 'echo-request'
list icmp_type 'echo-reply'
list icmp_type 'destination-unreachable'
list icmp_type 'packet-too-big'
list icmp_type 'time-exceeded'
list icmp_type 'bad-header'
list icmp_type 'unknown-header-type'
option limit '1000/sec'
option family 'ipv6'
option target 'ACCEPT'
config rule
option name 'Allow-IPSec-ESP'
option src 'wan'
option dest 'lan'
option proto 'esp'
option target 'ACCEPT'
config rule
option name 'Allow-ISAKMP'
option src 'wan'
option dest 'lan'
option dest_port '500'
option proto 'udp'
option target 'ACCEPT'
config include
option path '/etc/firewall.user'
config zone
option name 'vpnclient'
list network 'vpnclient'
option input 'REJECT'
option output 'ACCEPT'
option forward 'REJECT'
option masq '1'
option mtu_fix '1'
config forwarding
option src 'lan'
option dest 'vpnclient'
config zone
option name 'vpnclient'
list network 'vpnclient'
option input 'REJECT'
option output 'ACCEPT'
option forward 'REJECT'
option masq '1'
option mtu_fix '1'
config forwarding
option src 'lan'
option dest 'vpnclient'
root@OpenWrt:~#
mk24
January 13, 2019, 3:51pm
4
The wifi APs should be attached to the lan network, not wan.
1 Like
cd38
January 13, 2019, 7:06pm
5
Thanks for your help
1°)I have connect the openwrt by lan to ma ISP router.
My laptop by wireless don't receive any ip adresse
2°)i change network to lan in the interface configuration
My laptop had an ip adresse 192.168.1.148 but internet doesn't works and i can't ping my ips router (192.168.0.254)
cd38
January 13, 2019, 7:58pm
6
I restart all and it's works now with the 2°) thanks a lot for all !!!
tmomas
January 13, 2019, 8:09pm
7
@cd38
If your problem is solved, please consider marking this topic as [Solved]. (Click the pencil behind the topic...)