Dedicated wireless network for IoT devices

Yes... exactly. Just make sure that port 1 is removed from the vlan2 definition.

Thanks. Is the VLAN 2 definition even necessary, since it's unused then?

Nope... you can delete the vlan2 stanza. But, be sure to remove the wan interface since it references eth0.2.

1 Like

Meanwhile I've configured the routing on the IS and have to give a short update, in case somebody has a similar setup.

Unfortunately I have to correct this statement. The FRITZ!Box 7590 with FRITZ!OS 7.50 does NOT pass VLAN-tagged packets properly.

Pinging VLAN10-devices was possible from the LAN-devices but I wasn't able to connect to their web interfaces for example (Wireshark showed lots of TCP retransmissions and other errors). However since the IS is connected directly to the main switch it works as expected - so far no issues with VLAN-tagged packets on the D-Link DGS-1016D and the TP-Link TL-SG1005P.

This topic was automatically closed 10 days after the last reply. New replies are no longer allowed.