Debugging OpenWrt

[diversity]

Recently I came to the conclusion that I need to use
'@lan' interface device type

[Solved] Devices on interface not reachable

I have started from scratch by deleting all interfaces, other than lan, wan, wan6, and firewall zones first. Then I added a static ip 10.2.0.1/16 interface called 'virtualization' of device type eth0 and applied the lan firewall zone to it while creating the interface. The devices on the virtualization network segment have gateway 10.2.0.1 and netmask 255.255.0.0 One example is of a device ip is 10.2.1.1 I am unable to reach any of the devices on that network segment while having gotten an i…

but then I ran into what I have been fearing

Interfaces with device '@lan' have access to wan

even though they have their own firewall zone quite recently we solved setting up interfaces and came to the conclusion that it is best to use device '@lan' I am doing the same now for tmp_old_lan interface, in an effort moving IoT devices from a previous network scheme over to the network scheme I am setting up now. the problem is is that setting up such an interface looks like it imidiatly enables devices on that network segment to phone home. uci export network; uci export firewall pa…

So now I am totally clueless about how to proceed. I am getting desperate