# Debugging new board

**URL:** <https://forum.openwrt.org/t/debugging-new-board/12078>\
**Category:** For Developers\
**Created:** [February 26, 2018, 4:28pm UTC](https://forum.openwrt.org/t/debugging-new-board/12078 "2018-02-26T16:28:24Z")\
**Posts on this page:** 4\
**Page:** 1

<div class="post-metadata">

**Author:** ![adobo76](https://forum.openwrt.org/letter_avatar/adobo76/32/5_5575768a8748004e209b776fc1b2916d.png) [@adobo76](https://forum.openwrt.org/u/adobo76)\
**Post date:** [February 26, 2018, 4:28pm UTC](https://forum.openwrt.org/t/debugging-new-board/12078/1 "2018-02-26T16:28:25Z")

</div>

I've created a new board/menu entry in make menuconfig and have tried to create a minimal build. I have serial console access to the system. When I load the new uImage I see Starting Kernel and then the system reboots.

Is there a way to turn on more debug information during the kernel boot in order to get more information?  
Are there any other debugging methods to troubleshoot this issue?

---

<div class="post-metadata">

**Author:** ![robimarko](https://forum.openwrt.org/user_avatar/forum.openwrt.org/robimarko/32/617_2.png) [@robimarko](https://forum.openwrt.org/u/robimarko)\
**Post date:** [February 26, 2018, 5:39pm UTC](https://forum.openwrt.org/t/debugging-new-board/12078/2 "2018-02-26T17:39:31Z")

</div>

What is the target you are trying to make a build for?  
Also, specifications and access to the code would really help.

This looks like pin configuration not correctly set,I had something similar on ipq806x

---

<div class="post-metadata">

**Author:** ![adobo76](https://forum.openwrt.org/letter_avatar/adobo76/32/5_5575768a8748004e209b776fc1b2916d.png) [@adobo76](https://forum.openwrt.org/u/adobo76)\
**Post date:** [February 26, 2018, 6:16pm UTC](https://forum.openwrt.org/t/debugging-new-board/12078/3 "2018-02-26T18:16:28Z")

</div>

It's a proprietary board to a company in France called Vision Systems. I have their pin specifications as well. When I received the board it already had a bootloader and referenced imx6q-sabresd.dtb although they did not provide me with the dtb I found one with the same name under the openwrt software and have been using that one.  
Do you think I should concentrate on how the dtb file is compiled and validate the pin settings through that?

---

<div class="post-metadata">

**Author:** ![robimarko](https://forum.openwrt.org/user_avatar/forum.openwrt.org/robimarko/32/617_2.png) [@robimarko](https://forum.openwrt.org/u/robimarko)\
**Post date:** [February 26, 2018, 6:32pm UTC](https://forum.openwrt.org/t/debugging-new-board/12078/4 "2018-02-26T18:32:22Z")

</div>

I would suggest that you convert that DTB back to DTS so you can see actual definitions.  
Then you can compare those to other imx6 boards,most likely pinctrl is not correct
