Debricking Archer C60 v2 via EEPROM writing

[jimjomjum]

Hi. I was trying to debrick my Archer C60 v2 as suggested here:

A way to debrick TP-Link Archer C60 V2

I have (had =) ) a bricked Archer C60 V2 AC1350. I readed a lot about TFTP method to debrick the router but, both under Windows or Linux i couldn't make it work, in any way. Until when... I do a verbose tcpdump and i see: SRV linux-2qx8.local.:22 0 0 (259) So i simply changed the TFTP server port to 22 instead of 69 and... all debricked just fine !!! I never found this info anywhere... so i hope could be useful for somebody. As "recovery image" i used the "openwrt-19.07.0-rc1-ar71xx-gener…

Changing TFTP port from 69 to 22 should have been enough. However my router refuses to pull "tp_recovery.bin". What am I doing wrong?

As an alternative method, I was thinking about writing a full dump to the EEPROM using a clip and an USB programmer. Could anybody send the full dump for the Archer C60 v2?

Thanks in advance,
Jim.