I have installed "openwrt-18.06.0-ramips-rt305x-dir-615-d-squashfs-factory.bin" on my D-Link Dir-615 rev D4 router successfully.
Everything seems to be working well and I have set the wireless details up and it extends my network to the back of the garden which is what I wanted.
The problem occurs when I switch off the router (unplug it and then plug it back again ) , all my details and log in information for wireless network seems to reset to the default factory firmware and I have to re-enter everything again .
I have tried the "save" button , also the "save and apply " button but none seem to retain my information after a re-plug.
I have not downloaded or installed any of the other packages or files.
Please advise what I can do to solve this problem.
The link that you have sent me only seems to send me to the latest firmware but not the one you have suggested.
I am trying to look for the 17.01.5 but not finding it for the 615.
Where will I find the command line ?
In thru the 192.168.1.1 or on my computer where I bring up the cmd.exe ?
Will it also be in the rev 17.01.5 r3919 so that I know before I flash the 18.06.0 again ?
@[mbo2o]
The 17.01.5 revision seems to be working well and has retained my wireless information .I have powered it off and on a few times now but seems to be fine. Thanks for your suggestion
PS - I should mention that I am using windows 8.1 and donot have any knowledge of Linux
17.01.5 seems to be running fine for me and has been saving my network password n details. I was just wondering if I should goto 17.04.5.
Which is more recent 17. 01.5 or 17.04.5?
Would there be a difference if I went to 17.04.5?