Cudy WR1300 support?

For Developers
146

Hi,

I tried the changes of @jgora on openwrt 19.7.5 and it works like a charme now. I placed everything on github again: https://github.com/fermat2a/openwrt/tree/openwrt-19.07-cudy. I am using this versions on two WR1300 at the moment.

I also tried to make the actual master build for the WR1300. My changes are in https://github.com/fermat2a/openwrt/tree/master-cudy. I tried to compile it. The compilation finished without build errors but there is also no sysfs after build:

$ ls ./bin/targets/ramips/mt7621/
config.buildinfo  openwrt-ramips-mt7621-cudy_wr1300-initramfs-kernel.bin  packages    version.buildinfo
feeds.buildinfo   openwrt-ramips-mt7621-cudy_wr1300.manifest              sha256sums

Here is my .config without comments and empty lines:

CONFIG_MODULES=y
CONFIG_HAVE_DOT_CONFIG=y
CONFIG_TARGET_ramips=y
CONFIG_TARGET_ramips_mt7621=y
CONFIG_TARGET_ramips_mt7621_DEVICE_cudy_wr1300=y
CONFIG_HAS_SUBTARGETS=y
CONFIG_HAS_DEVICES=y
CONFIG_TARGET_BOARD="ramips"
CONFIG_TARGET_SUBTARGET="mt7621"
CONFIG_TARGET_PROFILE="DEVICE_cudy_wr1300"
CONFIG_TARGET_ARCH_PACKAGES="mipsel_24kc"
CONFIG_DEFAULT_TARGET_OPTIMIZATION="-Os -pipe -mno-branch-likely -mips32r2 -mtune=24kc"
CONFIG_CPU_TYPE="24kc"
CONFIG_LINUX_5_4=y
CONFIG_DEFAULT_base-files=y
CONFIG_DEFAULT_busybox=y
CONFIG_DEFAULT_ca-bundle=y
CONFIG_DEFAULT_dnsmasq=y
CONFIG_DEFAULT_dropbear=y
CONFIG_DEFAULT_firewall=y
CONFIG_DEFAULT_fstools=y
CONFIG_DEFAULT_ip6tables=y
CONFIG_DEFAULT_iptables=y
CONFIG_DEFAULT_iwinfo=y
CONFIG_DEFAULT_kmod-gpio-button-hotplug=y
CONFIG_DEFAULT_kmod-ipt-offload=y
CONFIG_DEFAULT_kmod-leds-gpio=y
CONFIG_DEFAULT_kmod-mt7603=y
CONFIG_DEFAULT_kmod-mt76x2=y
CONFIG_DEFAULT_kmod-usb-ledtrig-usbport=y
CONFIG_DEFAULT_kmod-usb2=y
CONFIG_DEFAULT_kmod-usb3=y
CONFIG_DEFAULT_libc=y
CONFIG_DEFAULT_libgcc=y
CONFIG_DEFAULT_libustream-wolfssl=y
CONFIG_DEFAULT_logd=y
CONFIG_DEFAULT_mtd=y
CONFIG_DEFAULT_netifd=y
CONFIG_DEFAULT_odhcp6c=y
CONFIG_DEFAULT_odhcpd-ipv6only=y
CONFIG_DEFAULT_opkg=y
CONFIG_DEFAULT_ppp=y
CONFIG_DEFAULT_ppp-mod-pppoe=y
CONFIG_DEFAULT_procd=y
CONFIG_DEFAULT_uci=y
CONFIG_DEFAULT_uclient-fetch=y
CONFIG_DEFAULT_urandom-seed=y
CONFIG_DEFAULT_urngd=y
CONFIG_DEFAULT_wpad-basic=y
CONFIG_DEFAULT_wpad-basic-wolfssl=y
CONFIG_AUDIO_SUPPORT=y
CONFIG_GPIO_SUPPORT=y
CONFIG_PCI_SUPPORT=y
CONFIG_USB_SUPPORT=y
CONFIG_RTC_SUPPORT=y
CONFIG_USES_DEVICETREE=y
CONFIG_USES_INITRAMFS=y
CONFIG_USES_SQUASHFS=y
CONFIG_USES_MINOR=y
CONFIG_HAS_MIPS16=y
CONFIG_NAND_SUPPORT=y
CONFIG_mipsel=y
CONFIG_ARCH="mipsel"
CONFIG_TARGET_ROOTFS_INITRAMFS=y
CONFIG_TARGET_INITRAMFS_COMPRESSION_LZMA=y
CONFIG_EXTERNAL_CPIO=""
CONFIG_TARGET_ROOTFS_SQUASHFS=y
CONFIG_TARGET_SQUASHFS_BLOCK_SIZE=256
CONFIG_TARGET_UBIFS_FREE_SPACE_FIXUP=y
CONFIG_TARGET_UBIFS_JOURNAL_SIZE=""
CONFIG_SIGNED_PACKAGES=y
CONFIG_SIGNATURE_CHECK=y
CONFIG_SHADOW_PASSWORDS=y
CONFIG_KERNEL_BUILD_USER=""
CONFIG_KERNEL_BUILD_DOMAIN=""
CONFIG_KERNEL_PRINTK=y
CONFIG_KERNEL_CRASHLOG=y
CONFIG_KERNEL_SWAP=y
CONFIG_KERNEL_DEBUG_FS=y
CONFIG_KERNEL_KALLSYMS=y
CONFIG_KERNEL_DEBUG_KERNEL=y
CONFIG_KERNEL_DEBUG_INFO=y
CONFIG_KERNEL_AIO=y
CONFIG_KERNEL_FHANDLE=y
CONFIG_KERNEL_FANOTIFY=y
CONFIG_KERNEL_MAGIC_SYSRQ=y
CONFIG_KERNEL_COREDUMP=y
CONFIG_KERNEL_ELF_CORE=y
CONFIG_KERNEL_PRINTK_TIME=y
CONFIG_KERNEL_KEYS=y
CONFIG_KERNEL_CGROUPS=y
CONFIG_KERNEL_FREEZER=y
CONFIG_KERNEL_CGROUP_PIDS=y
CONFIG_KERNEL_CGROUP_RDMA=y
CONFIG_KERNEL_CGROUP_BPF=y
CONFIG_KERNEL_CPUSETS=y
CONFIG_KERNEL_CGROUP_CPUACCT=y
CONFIG_KERNEL_RESOURCE_COUNTERS=y
CONFIG_KERNEL_MM_OWNER=y
CONFIG_KERNEL_MEMCG=y
CONFIG_KERNEL_MEMCG_SWAP=y
CONFIG_KERNEL_MEMCG_KMEM=y
CONFIG_KERNEL_CGROUP_SCHED=y
CONFIG_KERNEL_FAIR_GROUP_SCHED=y
CONFIG_KERNEL_CFS_BANDWIDTH=y
CONFIG_KERNEL_RT_GROUP_SCHED=y
CONFIG_KERNEL_BLK_CGROUP=y
CONFIG_KERNEL_BLK_DEV_THROTTLING=y
CONFIG_KERNEL_NAMESPACES=y
CONFIG_KERNEL_UTS_NS=y
CONFIG_KERNEL_IPC_NS=y
CONFIG_KERNEL_USER_NS=y
CONFIG_KERNEL_PID_NS=y
CONFIG_KERNEL_NET_NS=y
CONFIG_KERNEL_DEVPTS_MULTIPLE_INSTANCES=y
CONFIG_KERNEL_POSIX_MQUEUE=y
CONFIG_KERNEL_SECCOMP_FILTER=y
CONFIG_KERNEL_SECCOMP=y
CONFIG_KERNEL_IP_MROUTE=y
CONFIG_KERNEL_IPV6=y
CONFIG_KERNEL_IPV6_MULTIPLE_TABLES=y
CONFIG_KERNEL_IPV6_SUBTREES=y
CONFIG_KERNEL_IPV6_MROUTE=y
CONFIG_KERNEL_SQUASHFS_FRAGMENT_CACHE_SIZE=3
CONFIG_KERNEL_CC_OPTIMIZE_FOR_PERFORMANCE=y
CONFIG_IPV6=y
CONFIG_USE_SSTRIP=y
CONFIG_SSTRIP_ARGS="-z"
CONFIG_USE_UCLIBCXX=y
CONFIG_PKG_CHECK_FORMAT_SECURITY=y
CONFIG_PKG_ASLR_PIE_REGULAR=y
CONFIG_PKG_CC_STACKPROTECTOR_REGULAR=y
CONFIG_KERNEL_CC_STACKPROTECTOR_REGULAR=y
CONFIG_KERNEL_STACKPROTECTOR=y
CONFIG_PKG_FORTIFY_SOURCE_1=y
CONFIG_PKG_RELRO_FULL=y
CONFIG_BINARY_FOLDER=""
CONFIG_DOWNLOAD_FOLDER=""
CONFIG_LOCALMIRROR=""
CONFIG_AUTOREBUILD=y
CONFIG_BUILD_SUFFIX=""
CONFIG_TARGET_ROOTFS_DIR=""
CONFIG_CCACHE_DIR=""
CONFIG_EXTERNAL_KERNEL_TREE=""
CONFIG_KERNEL_GIT_CLONE_URI=""
CONFIG_BUILD_LOG_DIR=""
CONFIG_EXTRA_OPTIMIZATION="-fno-caller-saves -fno-plt"
CONFIG_TARGET_OPTIMIZATION="-Os -pipe -mno-branch-likely -mips32r2 -mtune=24kc"
CONFIG_SOFT_FLOAT=y
CONFIG_USE_MIPS16=y
CONFIG_EXTRA_BINUTILS_CONFIG_OPTIONS=""
CONFIG_EXTRA_GCC_CONFIG_OPTIONS=""
CONFIG_GDB=y
CONFIG_USE_MUSL=y
CONFIG_SSP_SUPPORT=y
CONFIG_BINUTILS_VERSION_2_34=y
CONFIG_BINUTILS_VERSION="2.34"
CONFIG_GCC_VERSION="8.4.0"
CONFIG_LIBC="musl"
CONFIG_TARGET_SUFFIX="musl"
CONFIG_TARGET_PREINIT_SUPPRESS_STDERR=y
CONFIG_TARGET_PREINIT_TIMEOUT=2
CONFIG_TARGET_PREINIT_IFNAME=""
CONFIG_TARGET_PREINIT_IP="192.168.1.1"
CONFIG_TARGET_PREINIT_NETMASK="255.255.255.0"
CONFIG_TARGET_PREINIT_BROADCAST="192.168.1.255"
CONFIG_TARGET_INIT_PATH="/usr/sbin:/usr/bin:/sbin:/bin"
CONFIG_TARGET_INIT_ENV=""
CONFIG_TARGET_INIT_CMD="/sbin/init"
CONFIG_TARGET_INIT_SUPPRESS_STDERR=y
CONFIG_PER_FEED_REPO=y
CONFIG_FEED_packages=y
CONFIG_FEED_luci=y
CONFIG_FEED_routing=y
CONFIG_FEED_telephony=y
CONFIG_FEED_freifunk=y
CONFIG_PACKAGE_base-files=y
CONFIG_PACKAGE_busybox=y
CONFIG_BUSYBOX_DEFAULT_HAVE_DOT_CONFIG=y
CONFIG_BUSYBOX_DEFAULT_INCLUDE_SUSv2=y
CONFIG_BUSYBOX_DEFAULT_LONG_OPTS=y
CONFIG_BUSYBOX_DEFAULT_SHOW_USAGE=y
CONFIG_BUSYBOX_DEFAULT_FEATURE_VERBOSE_USAGE=y
CONFIG_BUSYBOX_DEFAULT_LFS=y
CONFIG_BUSYBOX_DEFAULT_FEATURE_DEVPTS=y
CONFIG_BUSYBOX_DEFAULT_FEATURE_PIDFILE=y
CONFIG_BUSYBOX_DEFAULT_PID_FILE_PATH="/var/run"
CONFIG_BUSYBOX_DEFAULT_FEATURE_PREFER_APPLETS=y
CONFIG_BUSYBOX_DEFAULT_BUSYBOX_EXEC_PATH="/proc/self/exe"
CONFIG_BUSYBOX_DEFAULT_FEATURE_SYSLOG=y
CONFIG_BUSYBOX_DEFAULT_PLATFORM_LINUX=y
CONFIG_BUSYBOX_DEFAULT_CROSS_COMPILER_PREFIX=""
CONFIG_BUSYBOX_DEFAULT_SYSROOT=""
CONFIG_BUSYBOX_DEFAULT_EXTRA_CFLAGS=""
CONFIG_BUSYBOX_DEFAULT_EXTRA_LDFLAGS=""
CONFIG_BUSYBOX_DEFAULT_EXTRA_LDLIBS=""
CONFIG_BUSYBOX_DEFAULT_INSTALL_APPLET_SYMLINKS=y
CONFIG_BUSYBOX_DEFAULT_PREFIX="./_install"
CONFIG_BUSYBOX_DEFAULT_NO_DEBUG_LIB=y
CONFIG_BUSYBOX_DEFAULT_FEATURE_BUFFERS_GO_ON_STACK=y
CONFIG_BUSYBOX_DEFAULT_PASSWORD_MINLEN=6
CONFIG_BUSYBOX_DEFAULT_MD5_SMALL=1
CONFIG_BUSYBOX_DEFAULT_SHA3_SMALL=1
CONFIG_BUSYBOX_DEFAULT_FEATURE_FAST_TOP=y
CONFIG_BUSYBOX_DEFAULT_FEATURE_EDITING=y
CONFIG_BUSYBOX_DEFAULT_FEATURE_EDITING_MAX_LEN=512
CONFIG_BUSYBOX_DEFAULT_FEATURE_EDITING_HISTORY=256
CONFIG_BUSYBOX_DEFAULT_FEATURE_TAB_COMPLETION=y
CONFIG_BUSYBOX_DEFAULT_FEATURE_EDITING_FANCY_PROMPT=y
CONFIG_BUSYBOX_DEFAULT_SUBST_WCHAR=0
CONFIG_BUSYBOX_DEFAULT_LAST_SUPPORTED_WCHAR=0
CONFIG_BUSYBOX_DEFAULT_FEATURE_NON_POSIX_CP=y
CONFIG_BUSYBOX_DEFAULT_FEATURE_USE_SENDFILE=y
CONFIG_BUSYBOX_DEFAULT_FEATURE_COPYBUF_KB=4
CONFIG_BUSYBOX_DEFAULT_MONOTONIC_SYSCALL=y
CONFIG_BUSYBOX_DEFAULT_IOCTL_HEX2STR_ERROR=y
CONFIG_BUSYBOX_DEFAULT_FEATURE_SEAMLESS_GZ=y
CONFIG_BUSYBOX_DEFAULT_GUNZIP=y
CONFIG_BUSYBOX_DEFAULT_ZCAT=y
CONFIG_BUSYBOX_DEFAULT_BUNZIP2=y
CONFIG_BUSYBOX_DEFAULT_BZCAT=y
CONFIG_BUSYBOX_DEFAULT_BZIP2_SMALL=0
CONFIG_BUSYBOX_DEFAULT_FEATURE_BZIP2_DECOMPRESS=y
CONFIG_BUSYBOX_DEFAULT_GZIP=y
CONFIG_BUSYBOX_DEFAULT_GZIP_FAST=0
CONFIG_BUSYBOX_DEFAULT_FEATURE_GZIP_DECOMPRESS=y
CONFIG_BUSYBOX_DEFAULT_TAR=y
CONFIG_BUSYBOX_DEFAULT_FEATURE_TAR_CREATE=y
CONFIG_BUSYBOX_DEFAULT_FEATURE_TAR_FROM=y
CONFIG_BUSYBOX_DEFAULT_FEATURE_TAR_GNU_EXTENSIONS=y
CONFIG_BUSYBOX_DEFAULT_BASENAME=y
CONFIG_BUSYBOX_DEFAULT_CAT=y
CONFIG_BUSYBOX_DEFAULT_CHGRP=y
CONFIG_BUSYBOX_DEFAULT_CHMOD=y
CONFIG_BUSYBOX_DEFAULT_CHOWN=y
CONFIG_BUSYBOX_DEFAULT_CHROOT=y
CONFIG_BUSYBOX_DEFAULT_CP=y
CONFIG_BUSYBOX_DEFAULT_CUT=y
CONFIG_BUSYBOX_DEFAULT_DATE=y
CONFIG_BUSYBOX_DEFAULT_FEATURE_DATE_ISOFMT=y
CONFIG_BUSYBOX_DEFAULT_DD=y
CONFIG_BUSYBOX_DEFAULT_FEATURE_DD_SIGNAL_HANDLING=y
CONFIG_BUSYBOX_DEFAULT_FEATURE_DD_IBS_OBS=y
CONFIG_BUSYBOX_DEFAULT_DF=y
CONFIG_BUSYBOX_DEFAULT_DIRNAME=y
CONFIG_BUSYBOX_DEFAULT_DU=y
CONFIG_BUSYBOX_DEFAULT_FEATURE_DU_DEFAULT_BLOCKSIZE_1K=y
CONFIG_BUSYBOX_DEFAULT_ECHO=y
CONFIG_BUSYBOX_DEFAULT_FEATURE_FANCY_ECHO=y
CONFIG_BUSYBOX_DEFAULT_ENV=y
CONFIG_BUSYBOX_DEFAULT_EXPR=y
CONFIG_BUSYBOX_DEFAULT_EXPR_MATH_SUPPORT_64=y
CONFIG_BUSYBOX_DEFAULT_FALSE=y
CONFIG_BUSYBOX_DEFAULT_HEAD=y
CONFIG_BUSYBOX_DEFAULT_FEATURE_FANCY_HEAD=y
CONFIG_BUSYBOX_DEFAULT_ID=y
CONFIG_BUSYBOX_DEFAULT_LN=y
CONFIG_BUSYBOX_DEFAULT_LS=y
CONFIG_BUSYBOX_DEFAULT_FEATURE_LS_FILETYPES=y
CONFIG_BUSYBOX_DEFAULT_FEATURE_LS_FOLLOWLINKS=y
CONFIG_BUSYBOX_DEFAULT_FEATURE_LS_RECURSIVE=y
CONFIG_BUSYBOX_DEFAULT_FEATURE_LS_WIDTH=y
CONFIG_BUSYBOX_DEFAULT_FEATURE_LS_SORTFILES=y
CONFIG_BUSYBOX_DEFAULT_FEATURE_LS_TIMESTAMPS=y
CONFIG_BUSYBOX_DEFAULT_FEATURE_LS_USERNAME=y
CONFIG_BUSYBOX_DEFAULT_FEATURE_LS_COLOR=y
CONFIG_BUSYBOX_DEFAULT_FEATURE_LS_COLOR_IS_DEFAULT=y
CONFIG_BUSYBOX_DEFAULT_MD5SUM=y
CONFIG_BUSYBOX_DEFAULT_SHA256SUM=y
CONFIG_BUSYBOX_DEFAULT_FEATURE_MD5_SHA1_SUM_CHECK=y
CONFIG_BUSYBOX_DEFAULT_MKDIR=y
CONFIG_BUSYBOX_DEFAULT_MKFIFO=y
CONFIG_BUSYBOX_DEFAULT_MKNOD=y
CONFIG_BUSYBOX_DEFAULT_MKTEMP=y
CONFIG_BUSYBOX_DEFAULT_MV=y
CONFIG_BUSYBOX_DEFAULT_NICE=y
CONFIG_BUSYBOX_DEFAULT_PRINTF=y
CONFIG_BUSYBOX_DEFAULT_PWD=y
CONFIG_BUSYBOX_DEFAULT_READLINK=y
CONFIG_BUSYBOX_DEFAULT_FEATURE_READLINK_FOLLOW=y
CONFIG_BUSYBOX_DEFAULT_RM=y
CONFIG_BUSYBOX_DEFAULT_RMDIR=y
CONFIG_BUSYBOX_DEFAULT_SEQ=y
CONFIG_BUSYBOX_DEFAULT_SLEEP=y
CONFIG_BUSYBOX_DEFAULT_FEATURE_FANCY_SLEEP=y
CONFIG_BUSYBOX_DEFAULT_SORT=y
CONFIG_BUSYBOX_DEFAULT_SYNC=y
CONFIG_BUSYBOX_DEFAULT_FSYNC=y
CONFIG_BUSYBOX_DEFAULT_TAIL=y
CONFIG_BUSYBOX_DEFAULT_FEATURE_FANCY_TAIL=y
CONFIG_BUSYBOX_DEFAULT_TEE=y
CONFIG_BUSYBOX_DEFAULT_FEATURE_TEE_USE_BLOCK_IO=y
CONFIG_BUSYBOX_DEFAULT_TEST=y
CONFIG_BUSYBOX_DEFAULT_TEST1=y
CONFIG_BUSYBOX_DEFAULT_TEST2=y
CONFIG_BUSYBOX_DEFAULT_FEATURE_TEST_64=y
CONFIG_BUSYBOX_DEFAULT_TOUCH=y
CONFIG_BUSYBOX_DEFAULT_FEATURE_TOUCH_SUSV3=y
CONFIG_BUSYBOX_DEFAULT_TR=y
CONFIG_BUSYBOX_DEFAULT_TRUE=y
CONFIG_BUSYBOX_DEFAULT_UNAME=y
CONFIG_BUSYBOX_DEFAULT_UNAME_OSNAME="GNU/Linux"
CONFIG_BUSYBOX_DEFAULT_UNIQ=y
CONFIG_BUSYBOX_DEFAULT_WC=y
CONFIG_BUSYBOX_DEFAULT_YES=y
CONFIG_BUSYBOX_DEFAULT_FEATURE_PRESERVE_HARDLINKS=y
CONFIG_BUSYBOX_DEFAULT_FEATURE_HUMAN_READABLE=y
CONFIG_BUSYBOX_DEFAULT_CLEAR=y
CONFIG_BUSYBOX_DEFAULT_DEFAULT_SETFONT_DIR=""
CONFIG_BUSYBOX_DEFAULT_RESET=y
CONFIG_BUSYBOX_DEFAULT_START_STOP_DAEMON=y
CONFIG_BUSYBOX_DEFAULT_WHICH=y
CONFIG_BUSYBOX_DEFAULT_AWK=y
CONFIG_BUSYBOX_DEFAULT_FEATURE_AWK_LIBM=y
CONFIG_BUSYBOX_DEFAULT_FEATURE_AWK_GNU_EXTENSIONS=y
CONFIG_BUSYBOX_DEFAULT_CMP=y
CONFIG_BUSYBOX_DEFAULT_SED=y
CONFIG_BUSYBOX_DEFAULT_VI=y
CONFIG_BUSYBOX_DEFAULT_FEATURE_VI_MAX_LEN=1024
CONFIG_BUSYBOX_DEFAULT_FEATURE_VI_COLON=y
CONFIG_BUSYBOX_DEFAULT_FEATURE_VI_YANKMARK=y
CONFIG_BUSYBOX_DEFAULT_FEATURE_VI_SEARCH=y
CONFIG_BUSYBOX_DEFAULT_FEATURE_VI_USE_SIGNALS=y
CONFIG_BUSYBOX_DEFAULT_FEATURE_VI_DOT_CMD=y
CONFIG_BUSYBOX_DEFAULT_FEATURE_VI_READONLY=y
CONFIG_BUSYBOX_DEFAULT_FEATURE_VI_SETOPTS=y
CONFIG_BUSYBOX_DEFAULT_FEATURE_VI_SET=y
CONFIG_BUSYBOX_DEFAULT_FEATURE_VI_WIN_RESIZE=y
CONFIG_BUSYBOX_DEFAULT_FEATURE_VI_ASK_TERMINAL=y
CONFIG_BUSYBOX_DEFAULT_FEATURE_VI_UNDO_QUEUE_MAX=0
CONFIG_BUSYBOX_DEFAULT_FEATURE_ALLOW_EXEC=y
CONFIG_BUSYBOX_DEFAULT_FIND=y
CONFIG_BUSYBOX_DEFAULT_FEATURE_FIND_PRINT0=y
CONFIG_BUSYBOX_DEFAULT_FEATURE_FIND_MTIME=y
CONFIG_BUSYBOX_DEFAULT_FEATURE_FIND_MMIN=y
CONFIG_BUSYBOX_DEFAULT_FEATURE_FIND_PERM=y
CONFIG_BUSYBOX_DEFAULT_FEATURE_FIND_TYPE=y
CONFIG_BUSYBOX_DEFAULT_FEATURE_FIND_XDEV=y
CONFIG_BUSYBOX_DEFAULT_FEATURE_FIND_MAXDEPTH=y
CONFIG_BUSYBOX_DEFAULT_FEATURE_FIND_NEWER=y
CONFIG_BUSYBOX_DEFAULT_FEATURE_FIND_EXEC=y
CONFIG_BUSYBOX_DEFAULT_FEATURE_FIND_USER=y
CONFIG_BUSYBOX_DEFAULT_FEATURE_FIND_GROUP=y
CONFIG_BUSYBOX_DEFAULT_FEATURE_FIND_NOT=y
CONFIG_BUSYBOX_DEFAULT_FEATURE_FIND_DEPTH=y
CONFIG_BUSYBOX_DEFAULT_FEATURE_FIND_PAREN=y
CONFIG_BUSYBOX_DEFAULT_FEATURE_FIND_SIZE=y
CONFIG_BUSYBOX_DEFAULT_FEATURE_FIND_PRUNE=y
CONFIG_BUSYBOX_DEFAULT_FEATURE_FIND_PATH=y
CONFIG_BUSYBOX_DEFAULT_FEATURE_FIND_REGEX=y
CONFIG_BUSYBOX_DEFAULT_GREP=y
CONFIG_BUSYBOX_DEFAULT_EGREP=y
CONFIG_BUSYBOX_DEFAULT_FGREP=y
CONFIG_BUSYBOX_DEFAULT_FEATURE_GREP_CONTEXT=y
CONFIG_BUSYBOX_DEFAULT_XARGS=y
CONFIG_BUSYBOX_DEFAULT_FEATURE_XARGS_SUPPORT_CONFIRMATION=y
CONFIG_BUSYBOX_DEFAULT_FEATURE_XARGS_SUPPORT_QUOTES=y
CONFIG_BUSYBOX_DEFAULT_FEATURE_XARGS_SUPPORT_TERMOPT=y
CONFIG_BUSYBOX_DEFAULT_FEATURE_XARGS_SUPPORT_ZERO_TERM=y
CONFIG_BUSYBOX_DEFAULT_HALT=y
CONFIG_BUSYBOX_DEFAULT_POWEROFF=y
CONFIG_BUSYBOX_DEFAULT_REBOOT=y
CONFIG_BUSYBOX_DEFAULT_TELINIT_PATH=""
CONFIG_BUSYBOX_DEFAULT_FEATURE_KILL_DELAY=0
CONFIG_BUSYBOX_DEFAULT_INIT_TERMINAL_TYPE=""
CONFIG_BUSYBOX_DEFAULT_FEATURE_SHADOWPASSWDS=y
CONFIG_BUSYBOX_DEFAULT_LAST_ID=0
CONFIG_BUSYBOX_DEFAULT_FIRST_SYSTEM_ID=0
CONFIG_BUSYBOX_DEFAULT_LAST_SYSTEM_ID=0
CONFIG_BUSYBOX_DEFAULT_FEATURE_DEFAULT_PASSWD_ALGO="md5"
CONFIG_BUSYBOX_DEFAULT_LOGIN=y
CONFIG_BUSYBOX_DEFAULT_LOGIN_SESSION_AS_CHILD=y
CONFIG_BUSYBOX_DEFAULT_PASSWD=y
CONFIG_BUSYBOX_DEFAULT_FEATURE_PASSWD_WEAK_CHECK=y
CONFIG_BUSYBOX_DEFAULT_DEFAULT_MODULES_DIR=""
CONFIG_BUSYBOX_DEFAULT_DEFAULT_DEPMOD_FILE=""
CONFIG_BUSYBOX_DEFAULT_DMESG=y
CONFIG_BUSYBOX_DEFAULT_FEATURE_DMESG_PRETTY=y
CONFIG_BUSYBOX_DEFAULT_FLOCK=y
CONFIG_BUSYBOX_DEFAULT_HEXDUMP=y
CONFIG_BUSYBOX_DEFAULT_HWCLOCK=y
CONFIG_BUSYBOX_DEFAULT_MKSWAP=y
CONFIG_BUSYBOX_DEFAULT_MOUNT=y
CONFIG_BUSYBOX_DEFAULT_FEATURE_MOUNT_HELPERS=y
CONFIG_BUSYBOX_DEFAULT_FEATURE_MOUNT_CIFS=y
CONFIG_BUSYBOX_DEFAULT_FEATURE_MOUNT_FLAGS=y
CONFIG_BUSYBOX_DEFAULT_FEATURE_MOUNT_FSTAB=y
CONFIG_BUSYBOX_DEFAULT_PIVOT_ROOT=y
CONFIG_BUSYBOX_DEFAULT_SWAPON=y
CONFIG_BUSYBOX_DEFAULT_FEATURE_SWAPON_DISCARD=y
CONFIG_BUSYBOX_DEFAULT_FEATURE_SWAPON_PRI=y
CONFIG_BUSYBOX_DEFAULT_SWAPOFF=y
CONFIG_BUSYBOX_DEFAULT_SWITCH_ROOT=y
CONFIG_BUSYBOX_DEFAULT_UMOUNT=y
CONFIG_BUSYBOX_DEFAULT_FEATURE_UMOUNT_ALL=y
CONFIG_BUSYBOX_DEFAULT_FEATURE_MOUNT_LOOP=y
CONFIG_BUSYBOX_DEFAULT_FEATURE_BEEP_FREQ=0
CONFIG_BUSYBOX_DEFAULT_FEATURE_BEEP_LENGTH_MS=0
CONFIG_BUSYBOX_DEFAULT_CROND=y
CONFIG_BUSYBOX_DEFAULT_FEATURE_CROND_DIR="/etc"
CONFIG_BUSYBOX_DEFAULT_CRONTAB=y
CONFIG_BUSYBOX_DEFAULT_LESS=y
CONFIG_BUSYBOX_DEFAULT_FEATURE_LESS_MAXLINES=9999999
CONFIG_BUSYBOX_DEFAULT_LOCK=y
CONFIG_BUSYBOX_DEFAULT_STRINGS=y
CONFIG_BUSYBOX_DEFAULT_TIME=y
CONFIG_BUSYBOX_DEFAULT_FEATURE_IPV6=y
CONFIG_BUSYBOX_DEFAULT_FEATURE_PREFER_IPV4_ADDRESS=y
CONFIG_BUSYBOX_DEFAULT_VERBOSE_RESOLUTION_ERRORS=y
CONFIG_BUSYBOX_DEFAULT_BRCTL=y
CONFIG_BUSYBOX_DEFAULT_FEATURE_BRCTL_FANCY=y
CONFIG_BUSYBOX_DEFAULT_FEATURE_BRCTL_SHOW=y
CONFIG_BUSYBOX_DEFAULT_IFCONFIG=y
CONFIG_BUSYBOX_DEFAULT_FEATURE_IFCONFIG_STATUS=y
CONFIG_BUSYBOX_DEFAULT_FEATURE_IFCONFIG_HW=y
CONFIG_BUSYBOX_DEFAULT_FEATURE_IFCONFIG_BROADCAST_PLUS=y
CONFIG_BUSYBOX_DEFAULT_IFUPDOWN_IFSTATE_PATH=""
CONFIG_BUSYBOX_DEFAULT_IP=y
CONFIG_BUSYBOX_DEFAULT_FEATURE_IP_ADDRESS=y
CONFIG_BUSYBOX_DEFAULT_FEATURE_IP_LINK=y
CONFIG_BUSYBOX_DEFAULT_FEATURE_IP_ROUTE=y
CONFIG_BUSYBOX_DEFAULT_FEATURE_IP_ROUTE_DIR="/etc/iproute2"
CONFIG_BUSYBOX_DEFAULT_FEATURE_IP_RULE=y
CONFIG_BUSYBOX_DEFAULT_FEATURE_IP_NEIGH=y
CONFIG_BUSYBOX_DEFAULT_NC=y
CONFIG_BUSYBOX_DEFAULT_NETMSG=y
CONFIG_BUSYBOX_DEFAULT_NETSTAT=y
CONFIG_BUSYBOX_DEFAULT_FEATURE_NETSTAT_WIDE=y
CONFIG_BUSYBOX_DEFAULT_FEATURE_NETSTAT_PRG=y
CONFIG_BUSYBOX_DEFAULT_NSLOOKUP_OPENWRT=y
CONFIG_BUSYBOX_DEFAULT_NTPD=y
CONFIG_BUSYBOX_DEFAULT_FEATURE_NTPD_SERVER=y
CONFIG_BUSYBOX_DEFAULT_PING=y
CONFIG_BUSYBOX_DEFAULT_PING6=y
CONFIG_BUSYBOX_DEFAULT_FEATURE_FANCY_PING=y
CONFIG_BUSYBOX_DEFAULT_ROUTE=y
CONFIG_BUSYBOX_DEFAULT_TRACEROUTE=y
CONFIG_BUSYBOX_DEFAULT_TRACEROUTE6=y
CONFIG_BUSYBOX_DEFAULT_FEATURE_TRACEROUTE_VERBOSE=y
CONFIG_BUSYBOX_DEFAULT_DHCPD_LEASES_FILE=""
CONFIG_BUSYBOX_DEFAULT_UDHCPC=y
CONFIG_BUSYBOX_DEFAULT_UDHCPC_DEFAULT_SCRIPT="/usr/share/udhcpc/default.script"
CONFIG_BUSYBOX_DEFAULT_UDHCP_DEBUG=0
CONFIG_BUSYBOX_DEFAULT_UDHCPC_SLACK_FOR_BUGGY_SERVERS=80
CONFIG_BUSYBOX_DEFAULT_FEATURE_UDHCP_RFC3397=y
CONFIG_BUSYBOX_DEFAULT_IFUPDOWN_UDHCPC_CMD_OPTIONS=""
CONFIG_BUSYBOX_DEFAULT_FEATURE_MIME_CHARSET=""
CONFIG_BUSYBOX_DEFAULT_FREE=y
CONFIG_BUSYBOX_DEFAULT_KILL=y
CONFIG_BUSYBOX_DEFAULT_KILLALL=y
CONFIG_BUSYBOX_DEFAULT_PGREP=y
CONFIG_BUSYBOX_DEFAULT_PIDOF=y
CONFIG_BUSYBOX_DEFAULT_PS=y
CONFIG_BUSYBOX_DEFAULT_FEATURE_PS_WIDE=y
CONFIG_BUSYBOX_DEFAULT_BB_SYSCTL=y
CONFIG_BUSYBOX_DEFAULT_TOP=y
CONFIG_BUSYBOX_DEFAULT_FEATURE_TOP_CPU_USAGE_PERCENTAGE=y
CONFIG_BUSYBOX_DEFAULT_FEATURE_TOP_CPU_GLOBAL_PERCENTS=y
CONFIG_BUSYBOX_DEFAULT_UPTIME=y
CONFIG_BUSYBOX_DEFAULT_SV_DEFAULT_SERVICE_DIR=""
CONFIG_BUSYBOX_DEFAULT_SH_IS_ASH=y
CONFIG_BUSYBOX_DEFAULT_BASH_IS_NONE=y
CONFIG_BUSYBOX_DEFAULT_ASH=y
CONFIG_BUSYBOX_DEFAULT_ASH_INTERNAL_GLOB=y
CONFIG_BUSYBOX_DEFAULT_ASH_BASH_COMPAT=y
CONFIG_BUSYBOX_DEFAULT_ASH_JOB_CONTROL=y
CONFIG_BUSYBOX_DEFAULT_ASH_ALIAS=y
CONFIG_BUSYBOX_DEFAULT_ASH_EXPAND_PRMT=y
CONFIG_BUSYBOX_DEFAULT_ASH_ECHO=y
CONFIG_BUSYBOX_DEFAULT_ASH_PRINTF=y
CONFIG_BUSYBOX_DEFAULT_ASH_TEST=y
CONFIG_BUSYBOX_DEFAULT_ASH_GETOPTS=y
CONFIG_BUSYBOX_DEFAULT_ASH_CMDCMD=y
CONFIG_BUSYBOX_DEFAULT_FEATURE_SH_MATH=y
CONFIG_BUSYBOX_DEFAULT_FEATURE_SH_MATH_64=y
CONFIG_BUSYBOX_DEFAULT_FEATURE_SH_NOFORK=y
CONFIG_BUSYBOX_DEFAULT_LOGGER=y
CONFIG_BUSYBOX_DEFAULT_FEATURE_SYSLOGD_READ_BUFFER_SIZE=0
CONFIG_BUSYBOX_DEFAULT_FEATURE_IPC_SYSLOG_BUFFER_SIZE=0
CONFIG_PACKAGE_ca-bundle=y
CONFIG_PACKAGE_dnsmasq=y
CONFIG_PACKAGE_dropbear=y
CONFIG_DROPBEAR_CURVE25519=y
CONFIG_DROPBEAR_ED25519=y
CONFIG_DROPBEAR_CHACHA20POLY1305=y
CONFIG_DROPBEAR_DBCLIENT=y
CONFIG_DROPBEAR_SCP=y
CONFIG_PACKAGE_firewall=y
CONFIG_PACKAGE_fstools=y
CONFIG_FSTOOLS_UBIFS_EXTROOT=y
CONFIG_PACKAGE_fwtool=y
CONFIG_PACKAGE_getrandom=y
CONFIG_PACKAGE_jsonfilter=y
CONFIG_PACKAGE_libc=y
CONFIG_PACKAGE_libgcc=y
CONFIG_PACKAGE_libpthread=y
CONFIG_PACKAGE_logd=y
CONFIG_PACKAGE_mtd=y
CONFIG_PACKAGE_netifd=y
CONFIG_PACKAGE_openwrt-keyring=y
CONFIG_PACKAGE_opkg=y
CONFIG_PACKAGE_procd=y
CONFIG_PACKAGE_rpcd=y
CONFIG_PACKAGE_rpcd-mod-file=y
CONFIG_PACKAGE_rpcd-mod-iwinfo=y
CONFIG_PACKAGE_ubox=y
CONFIG_PACKAGE_ubus=y
CONFIG_PACKAGE_ubusd=y
CONFIG_PACKAGE_uci=y
CONFIG_PACKAGE_urandom-seed=y
CONFIG_PACKAGE_urngd=y
CONFIG_PACKAGE_usign=y
CONFIG_ZABBIX_NOSSL=y
CONFIG_ZABBIX_POSTGRESQL=y
CONFIG_PACKAGE_wireless-regdb=y
CONFIG_PACKAGE_kmod-scsi-core=y
CONFIG_PACKAGE_kmod-leds-gpio=y
CONFIG_PACKAGE_kmod-lib-crc-ccitt=y
CONFIG_PACKAGE_kmod-nls-base=y
CONFIG_PACKAGE_kmod-br-netfilter=y
CONFIG_PACKAGE_kmod-ip6tables=y
CONFIG_PACKAGE_kmod-ipt-conntrack=y
CONFIG_PACKAGE_kmod-ipt-core=y
CONFIG_PACKAGE_kmod-ipt-nat=y
CONFIG_PACKAGE_kmod-ipt-offload=y
CONFIG_PACKAGE_kmod-nf-conntrack=y
CONFIG_PACKAGE_kmod-nf-conntrack6=y
CONFIG_PACKAGE_kmod-nf-flow=y
CONFIG_PACKAGE_kmod-nf-ipt=y
CONFIG_PACKAGE_kmod-nf-ipt6=y
CONFIG_PACKAGE_kmod-nf-nat=y
CONFIG_PACKAGE_kmod-nf-reject=y
CONFIG_PACKAGE_kmod-nf-reject6=y
CONFIG_PACKAGE_kmod-macremapper=y
CONFIG_PACKAGE_kmod-ppp=y
CONFIG_PACKAGE_kmod-pppoe=y
CONFIG_PACKAGE_kmod-pppox=y
CONFIG_PACKAGE_kmod-slhc=y
CONFIG_PACKAGE_kmod-udptunnel4=y
CONFIG_PACKAGE_kmod-udptunnel6=y
CONFIG_PACKAGE_kmod-wireguard=y
CONFIG_PACKAGE_kmod-gpio-button-hotplug=y
CONFIG_PACKAGE_kmod-usb-core=y
CONFIG_PACKAGE_kmod-usb-ehci=y
CONFIG_PACKAGE_kmod-usb-ledtrig-usbport=y
CONFIG_PACKAGE_kmod-usb-storage=y
CONFIG_PACKAGE_kmod-usb-storage-extras=y
CONFIG_PACKAGE_kmod-usb-storage-uas=y
CONFIG_PACKAGE_kmod-usb2=y
CONFIG_PACKAGE_kmod-usb3=y
CONFIG_PACKAGE_kmod-cfg80211=y
CONFIG_PACKAGE_kmod-mac80211=y
CONFIG_PACKAGE_MAC80211_DEBUGFS=y
CONFIG_PACKAGE_MAC80211_MESH=y
CONFIG_PACKAGE_kmod-mt76-core=y
CONFIG_PACKAGE_kmod-mt7603=y
CONFIG_PACKAGE_kmod-mt76x02-common=y
CONFIG_PACKAGE_kmod-mt76x2=y
CONFIG_PACKAGE_kmod-mt76x2-common=y
CONFIG_PACKAGE_libiwinfo-lua=y
CONFIG_PACKAGE_lua=y
CONFIG_PACKAGE_libip4tc=y
CONFIG_PACKAGE_libip6tc=y
CONFIG_PACKAGE_libxtables=y
CONFIG_PACKAGE_libdcwproto=y
CONFIG_PACKAGE_libdcwsocket=y
CONFIG_PACKAGE_libwolfssl=y
CONFIG_WOLFSSL_HAS_AES_CCM=y
CONFIG_WOLFSSL_HAS_CHACHA_POLY=y
CONFIG_WOLFSSL_HAS_DH=y
CONFIG_WOLFSSL_HAS_ARC4=y
CONFIG_WOLFSSL_HAS_CERTGEN=y
CONFIG_WOLFSSL_HAS_TLSV10=y
CONFIG_WOLFSSL_HAS_TLSV13=y
CONFIG_WOLFSSL_HAS_SESSION_TICKET=y
CONFIG_WOLFSSL_HAS_OCSP=y
CONFIG_WOLFSSL_HAS_WPAS=y
CONFIG_WOLFSSL_HAS_NO_HW=y
CONFIG_PACKAGE_libblobmsg-json=y
CONFIG_PACKAGE_libiwinfo=y
CONFIG_PACKAGE_libjson-c=y
CONFIG_PACKAGE_liblua=y
CONFIG_PACKAGE_liblucihttp=y
CONFIG_PACKAGE_liblucihttp-lua=y
CONFIG_PACKAGE_libnl-tiny=y
CONFIG_PACKAGE_libubox=y
CONFIG_PACKAGE_libubus=y
CONFIG_PACKAGE_libubus-lua=y
CONFIG_PACKAGE_libuci=y
CONFIG_PACKAGE_libuclient=y
CONFIG_PACKAGE_libustream-wolfssl=y
CONFIG_RE2_SHARED=y
CONFIG_PACKAGE_rpcd-mod-luci=y
CONFIG_PACKAGE_rpcd-mod-rrdns=y
CONFIG_PACKAGE_uclibcxx=y
CONFIG_PACKAGE_luci=y
CONFIG_PACKAGE_luci-base=y
CONFIG_LUCI_SRCDIET=y
CONFIG_LUCI_JSMIN=y
CONFIG_LUCI_CSSTIDY=y
CONFIG_PACKAGE_luci-compat=y
CONFIG_PACKAGE_luci-mod-admin-full=y
CONFIG_PACKAGE_luci-mod-network=y
CONFIG_PACKAGE_luci-mod-status=y
CONFIG_PACKAGE_luci-mod-system=y
CONFIG_PACKAGE_luci-app-dcwapd=y
CONFIG_PACKAGE_luci-app-firewall=y
CONFIG_PACKAGE_luci-app-opkg=y
CONFIG_PACKAGE_luci-app-wireguard=y
CONFIG_PACKAGE_luci-theme-bootstrap=y
CONFIG_PACKAGE_luci-theme-material=y
CONFIG_PACKAGE_luci-proto-ipv6=y
CONFIG_PACKAGE_luci-proto-ppp=y
CONFIG_PACKAGE_luci-proto-wireguard=y
CONFIG_PACKAGE_luci-lib-ip=y
CONFIG_PACKAGE_luci-lib-jsonc=y
CONFIG_PACKAGE_luci-lib-nixio=y
CONFIG_PACKAGE_luci-lib-nixio_notls=y
CONFIG_POSTFIX_TLS=y
CONFIG_POSTFIX_SASL=y
CONFIG_POSTFIX_LDAP=y
CONFIG_POSTFIX_CDB=y
CONFIG_POSTFIX_SQLITE=y
CONFIG_POSTFIX_PCRE=y
CONFIG_PACKAGE_ip6tables=y
CONFIG_PACKAGE_iptables=y
CONFIG_DNSDIST_OPENSSL=y
CONFIG_OPENLDAP_DEBUG=y
CONFIG_PACKAGE_dcwapd=y
CONFIG_PACKAGE_mrmctl=y
CONFIG_PACKAGE_wireguard-tools=y
CONFIG_PACKAGE_cgi-io=y
CONFIG_PACKAGE_uhttpd=y
CONFIG_PACKAGE_hostapd-common=y
CONFIG_WPA_MSG_MIN_PRIORITY=3
CONFIG_WPA_WOLFSSL=y
CONFIG_DRIVER_11N_SUPPORT=y
CONFIG_DRIVER_11AC_SUPPORT=y
CONFIG_DRIVER_11W_SUPPORT=y
CONFIG_PACKAGE_wpad-basic=y
CONFIG_PACKAGE_wpad-basic-wolfssl=m
CONFIG_PACKAGE_iw=y
CONFIG_PACKAGE_odhcp6c=y
CONFIG_PACKAGE_odhcp6c_ext_cer_id=0
CONFIG_PACKAGE_odhcpd-ipv6only=y
CONFIG_PACKAGE_odhcpd_ipv6only_ext_cer_id=0
CONFIG_PACKAGE_ppp=y
CONFIG_PACKAGE_ppp-mod-pppoe=y
CONFIG_PACKAGE_uclient-fetch=y
CONFIG_PACKAGE_iwinfo=y
CONFIG_PACKAGE_jshn=y
CONFIG_PACKAGE_libjson-script=y
CONFIG_STRACE_NONE=y
CONFIG_PACKAGE_ubi-utils=y

bests

Sascha

147

Hey,

I ordered one of these and will be testing this once it arrives.

I didn't check everything, but I did find the following issue in target/linux/ramips/image/mt7621.mk

The IMAGE_SIZE := $(ralink_default_fw_size_16M) no longer works in master.

If I am not mistaken, it should be IMAGE_SIZE := 15872k because the firmware partition is listed in the dts as size 0xf80000

Is anybody working on getting these changes together as a Pull Request? If not I can work on it once I mine comes in.

Edit: I made a build of the latest code from master with the @fermat2a's changes plus the image size fix.
WARNING: this is completely untested as I haven't yet received the router. Use at your own risk.
Source code: https://github.com/pyckle/openwrt/tree/cudy_wr1300
Build: https://mrpickles.fr.to/b2cd6b3160aff0afc688bd4d6478252735d3d1fe1c5162c5193d27a95bbb51a7/

148

dts should be adapted to master branch

149

I believe that @fermat2a already did that: https://github.com/pyckle/openwrt/commit/8dc610724e048cb4fe62e3095241f0b54badf38b#diff-f23596a7dcf5537d3178729128dd2f7003cb7abc392a5b716e94ea9a7194c4bd

Are more changes needed?

150

Hi,

you are right. I have integrated your change and I got an image, but I will not be able to test it before wednesday. When this is done, I will create a pull request for master. If you can test it before, you are welcome to create a pull request.

I created a pull request for 19.07: https://github.com/openwrt/openwrt/pull/3725.

bests

Sascha

151

Hey,

I won't have time to test before Wednesday - most likely can't before next week.

Be sure to read https://openwrt.org/submitting-patches and https://openwrt.org/docs/guide-developer/device-support-policies before submitting the PR - writing the commit messages and ensuring that all of the changes meet the PR standards can take some time. I am happy to assist as much as I can (I'm not an expert) or try it myself. Looking at other similar device that have recently been added also helps.

152

I tested the master build - it does not work. I don't have the equipment to solder a uart onto this to understand why. I might be able to do this in the next couple of weeks.
Fortunately, the tftp recovery allowed me to recover the router.

153

Same to me, I killed my cudy. Can you tell me how to get it working again using TFTP? Can I follow https://openwrt.org/docs/guide-user/troubleshooting/tftpserver? Will des router search the TFT at 192.168.0.66?

Do you have a description how to solder the uart?

154

@fermat2a recovery process was mentioned in the thread time ago by @lrussell887. Just follow this instructions: http://www.cudytech.com/newsinfo/547425.html I have recovered several times my unit without any problem.

Sadly I finally decided to return it since all my IOT devices lost connection against the AP. A friend of mine that has the same unit doesn't have this problems with a very similar setup. I ended with the conclusion of faulty hardware related since I tested all variants of fw (original, cudy's openwrt, my own compiled from 17.0.5, etc.)

155

Show me how the USB 3.0 should work? i have tried everything to get my external drive to recognize somewhere?? pc, android?
USB sharing enabled... but where? IP address access? icon?
or is mine post fixed??

help me see why i am being myopic .

156

hello !
in first you have to mount your USBdisk drive ! (if its an ntfs format use the option uid=1000 gid=1000)

if want share your disk on network use samba !

good luck !!!

need info use the guides here

157

it was faulty equipment thx!

158

Hi @all,
I'm new to openWrt and trying to get my WR1300 acting as NAS, sharing files via samba.
Currently I'm using exFAT, becaus I haven't been able to install ext4-kernel-module.

Unfortunately it's not possible to install the ex4-kmod (which I tried to do) because of a mismatching kernel:

root@OpenWrt:~# opkg install ./kmod-fs-ext4_4.14.171-1_mipsel_24kc.ipk
Installing kmod-fs-ext4 (4.14.171-1) to root...
Collected errors:
*satisfy_dependencies_for: Cannot satisfy the following dependencies for kmod-fs-ext4:
*kernel (= 4.14.171-1-16b77c6fbb9d9192d39ab642ba67d11a)
*opkg_install_cmd: Cannot install package kmod-fs-ext4.
root@OpenWrt:~# uname -a
Linux OpenWrt 4.14.171 #0 SMP Thu Feb 27 21:25:59 2020 mips GNU/Linux
root@OpenWrt:~#

I'm running OpenWrt 18.06.8, r7989-82fbd85747, provided by lrussell887.
I also tried the original firmware from the cudy-site - also no luck, kernel does not match the version the module was compiled for.

Just for info: Forcing installation (by using --force-depends) is a BAD idea! It endend in a boot-loop and I had to reinstall the original firmware ...

Does anyone know, how to install the ext4-filesystem-module?
Thx in advance.

159

Just 4 info:
I installed the actual version on openWrt for WR1300 (19.07.4 from lrussell887) and evrything worked fine. I was able to install the ext4-fs-module. Unfortunaltey my drive doesn't show up in /dev/sd*, nor in block info.

 lsusb -t
/:  Bus 02.Port 1: Dev 1, Class=root_hub, Driver=xhci-mtk/1p, 5000M
   |__ Port 1: Dev 4, If 0, Class=Mass Storage, Driver=uas, 5000M
/:  Bus 01.Port 1: Dev 1, Class=root_hub, Driver=xhci-mtk/2p, 480M

Installed usb-modules are as follows:

opkg list-installed | grep us
kmod-usb-core - 4.14.195-1
kmod-usb-ehci - 4.14.195-1
kmod-usb-ledtrig-usbport - 4.14.195-1
kmod-usb-ohci - 4.14.195-1
kmod-usb-ohci-pci - 4.14.195-1
kmod-usb-storage - 4.14.195-1
kmod-usb-storage-uas - 4.14.195-1
kmod-usb2 - 4.14.195-1
kmod-usb2-pci - 4.14.195-1
kmod-usb3 - 4.14.195-1
libusb-1.0-0 - 1.0.22-2
usbutils - 007-10

I will continue to examine the case - any push in the right direction will be very much appreciated :wink:

160

Seems to be a hardware-problem; dmesg lists:

[   36.380723] scsi 0:0:0:0: tag#0 uas_eh_abort_handler 0 uas-tag 1 inflight: CMD IN 
[   36.388294] scsi 0:0:0:0: tag#0 CDB: opcode=0x12 12 00 00 00 24 00
[   36.394700] xhci-mtk 1e1c0000.xhci: Mismatch between completed Set TR Deq Ptr command & xHCI internal state.
[   36.404491] xhci-mtk 1e1c0000.xhci: ep deq seg = 86953d80, deq ptr = a710d010
[   36.460733] scsi host0: uas_eh_device_reset_handler start
[   36.466247] xhci-mtk 1e1c0000.xhci: Mismatch between completed Set TR Deq Ptr command & xHCI internal state.
[   36.476038] xhci-mtk 1e1c0000.xhci: ep deq seg = 86953500, deq ptr = a77db010
[   36.630887] usb 2-1: reset SuperSpeed USB device number 2 using xhci-mtk
[   36.662286] scsi host0: uas_eh_device_reset_handler success
[   36.667909] xhci-mtk 1e1c0000.xhci: ERROR Transfer event for unknown stream ring slot 1 ep 4
[   36.676316] xhci-mtk 1e1c0000.xhci: @00000000077772e0 069ff200 00000000 05000000 01058001
[   36.690768] scsi 0:0:0:0: tag#0 uas_eh_abort_handler 0 uas-tag 1 inflight: CMD 
[   36.698069] scsi 0:0:0:0: tag#0 CDB: opcode=0x0 00 00 00 00 00 00
[   36.704279] scsi host0: uas_eh_device_reset_handler start
[   36.709740] xhci-mtk 1e1c0000.xhci: Mismatch between completed Set TR Deq Ptr command & xHCI internal state.
[   36.719526] xhci-mtk 1e1c0000.xhci: ep deq seg = 8703fb00, deq ptr = a735a010
[   36.870895] usb 2-1: reset SuperSpeed USB device number 2 using xhci-mtk
[   36.902173] scsi host0: uas_eh_device_reset_handler success
[   36.907815] scsi 0:0:0:0: Device offlined - not ready after error recovery

When using the original (Cudy) firmware from their site, the device is recognized an can be used - as long as its FAT32 formatted (as i already mentioned, installation of ext4-fs-modules fails) . Unfortunately this is no option because of the limitations when sharing the drive via samba (no files > 4GB, no right-management).

Perhaps someone has an idea?

161

Hallo,

opkg install kmod-fs-ext4 kmod-usb-storage kmod-usb-ohci kmod-usb-uhci e2fsprogs fdisk

thats all,
ready

162

Hi Ice32,
thanks for your reply! Literally that was what I did and what lead to the situation described above.
Fortunately I've found a "solution" in the meantime: I just disabled the uas-driver for that device by inserting
quirks=<VendorId>:<ProductId>:u in /etc/modules.d/usb-storage
After a reboot the drive showed up and can be mounted. It's only USB 2.0 but at least useable.

If someone's interested, these discussions lead to the "solution":

https://bugs.openwrt.org/index.php?do=details&task_id=1537
https://github.com/gnubee-git/GnuBee_Docs/issues/98

The next challenge will be the installation of the required samba-packages - seems as if 11MB free space aren't enough ...

163

Hi, UliDe
read this
https://openwrt.org/docs/guide-user/additional-software/extroot_configuration

and everything will be fine

164

Hello everybody,

Just like to report that I got this model today. As I could check, it's Cudy WR1300 EU v1.0.

I downloaded the OpenWrt version provided by Cudy and got it running immediatlty. Update process went smoothly.

As I could check, this is what I got:

OpenWrt 19.07.3 r11063-85e04e9f46 / LuCI openwrt-19.07 branch git-20.136.49537-fb2f363

I didn't have time yet to check the configuration deeply, but my idea is to get it running as my main router, connected to the modem.

Best regards,

165

So, the OpenWrt provided by Cudy worked great, however, the overlay filesystem barely had free space. I just installed snmpd, and couldn't install anything else.

I decided to follow the procedures provided by lrussell887 in post 54, and now have the router running smoothly (besides, I could recover around 10MB in overlay).

So far so good! :slight_smile: