Could u add this device support?

For Developers
1

There is a new router, could u support it? Details and its offical dts file offered by the manufacturer show in the following.

Router Detail:
CPU: IPQ8072A, arm a53 cpu, Quad Core 2.2Ghz
Network: dual 5G ethernet,  USB3.0 *1, USB Console *1, dual 4x4 802.11ax 1200Mbps@2.4g / 802.11ax 2400Mbps @5g  
Chip: IPQ8072A+QCN5054+QCN5024+QCA8081
System Memory: 1G
NOR storage: 4G
Button: A WPS button ( long press to reset)
LED: 3

There is the mtd info:

root@OpenWrt:~# cat /proc/mtd
dev:    size   erasesize  name
mtd0: 00040000 00010000 "0:SBL1"
mtd1: 00010000 00010000 "0:MIBIB"
mtd2: 00160000 00010000 "0:QSEE"
mtd3: 00010000 00010000 "0:DEVCFG"
mtd4: 00020000 00010000 "0:RPM"
mtd5: 00010000 00010000 "0:CDT"
mtd6: 00010000 00010000 "0:APPSBLENV"
mtd7: 000a0000 00010000 "0:APPSBL"
mtd8: 00040000 00010000 "0:ART"
mtd9: 00080000 00010000 "0:ETHPHYFW"
mtd10: 00600000 00010000 "0:HLOS"
mtd11: 03460000 00010000 "rootfs"
mtd12: 01e00000 00010000 "rootfs_data"
mtd13: 00240000 00010000 "0:WIFIFW"
mtd14: 20000000 00020000 "qcom_nand.0"

Luckily, a OpenWRT has run on the device. However, it is so simple that lacks of many other basic functions.

The official dts file can be got at https://sendanywhe.re/03YTX63K.
The mtd info can be got at https://sendanywhe.re/W377X1DX.
The mtd0-mtd10,mtd13 bin can be got at https://sendanywhe.re/96F9LNPX.
The devicetree info exported with shell commands in OpenWRT can be got at https://sendanywhe.re/85KWUYEP.

By the way, the current OpenWRT system is built by Qualcomm FAE.

2

This device appears to be similar to the DL-WRX36, so in theory it sounds supportable. But we can't just "add support" given just the device tree file. Someone has to actually figure out how to flash the firmware and test it on the real device.

What brand and model is this router? It would make things a lot easier to test if you have access to the serial console so you can upload and boot test images from memory without having to constantly flash the device.

3

4 gigs of NOR??? What is this thing and how much does it cost?

4

Have fun - https://openwrt.org/faq/how_can_i_add_support_for_a_new_device

5

No brand and model. It is directly sold by the factory. Now it runs with QSDK. I can access to it with the usb serial console. Unfortunately, any input would be ignored in the usb serial console. All the hardware is similar to the YunCore AX880 expect the memory and ethernet ( it is 5G, and the yuncore ax880 is 2.5g)

6

About $208.5.

7

pretty much unobtainium for any regular user then ... ?

8

Executed shell scripts at https://openwrt.org/faq/how_can_i_add_support_for_a_new_device, the results can be got at [GPIO-TEST] https://sendanywhe.re/NA6T8S3R and [GPIO-DUMP] https://sendanywhe.re/8G4VZ4P0.

9

I'm actually not sure what's the OpenWrt policy is with regards to white-label devices like this, since the Firmware Selector is keyed on the device brand and model. Was this something you bought from Aliexpress?

10

Got from Alibaba.

11

ok sold by what factory ? if its QSDK its an ipq807x device ? dts has to be ported from qsdk to openwrt.. as they arent the same, how similar to yuncore ax880 ? i might be able to assist, i have some similar firmware images for yuncore models and others however i can see by the partition it not standard... so probably needs some work.

12

these all seem to be expired urls... repost