Continual problem when using DNSCrypt - help!

[0xCrypt]

@okji

under "config dnsmasq" add the following to the end of the list

option resolvfile '/etc/resolv-crypt.conf'
list server '127.0.0.1#5353'
list server '127.0.0.1#5454'
list server '/pool.ntp.org/208.67.222.222'

@AmbientSummer

/etc/config/dhcp

config dnsmasq
[...]
list server '127.0.0.1#5353'
list server '127.0.0.1#5354'
list server '127.0.0.1#5355'
list server '/pool.ntp.org/77.88.8.8'
list server '/pool.ntp.org/8.8.8.8'
list server '/pool.ntp.org/2a02:6b8:0:1::feed:0ff'
list server '/pool.ntp.org/2001:4860:4860::8844'
...

thank you both for yours posts

Adding the ntp servers in dnsmasq made it not work.NTP servers were set as DNS forwarders in Luci>Network>DHCP and DNS>DNS Forwarding, but didn't appear in Luci>System>NTP servers; is this to be expected?

To remove DNS leaks from ISP one needs to use the command
uci network.wan.dns='x.x.x.x'
and
vi /etc/network/config
wan interface
option peerdns '0'
priority.. well kinda:

[SOLVED] Change the router dns, to use my network dns

Ciao! How are you? Thanks so much! You are a magus! Now works. But, I still need a little help, sometimes the server is down, for whatever, bug, backup or whatver, so what if my DNS server is down? Then my clients will not be able to use the DNS? Is there a setting like strict order or something like that so that only try 2nd if the first is failed? I think there is in DNSMASQ strict order, I guess with wan is nothing like that? Thanks so much! Happy day! Patrik